[cocolococo]

Originally Posted by KTE

Does it go back the distance you’ve set it? I had a problem when I first coded and it would only move back/forward if it was quite far forward to begin with!

For me it’s only close the driver side door, then moves me up automatically. At times when I have started the engine it either stops momentarily or on the one occasion stopped moving forward entirely.. just pressed down my memory button to continue.

It always moves back after I turn off the engine and open the door. But sometimes it does not move forward(back to original position) when I close the door and start the engine.

[cocolococo]

Originally Posted by Jhnblckwood

It will pause moving if u start the car for a second then continue but if u put car in gear before seat is done moving it will stop.

I am not sure whether I did engage a gear. I'll look into that, thanks for your help.

[Jhnblckwood]

Originally Posted by cocolococo

I am not sure whether I did engage a gear. I'll look into that, thanks for your help.

No problem. U prolly did.

[///M Houbi]

Hello

I have a very weird issue. I coded easy entry few weeks ago and it worked like a charm right on first try (i just had to code MODUS_FA_SLV).

Two days ago it just stopped working without obvious reasons. I tried both keys and also tried to code it out and back in again, but its just not doing anything anymore. No easy entry and no more easy exit.

Any ideas would be hardly appreciated!

[Jhnblckwood]

Originally Posted by ///M Houbi

Hello

I have a very weird issue. I coded easy entry few weeks ago and it worked like a charm right on first try (i just had to code MODUS_FA_SLV).

Two days ago it just stopped working without obvious reasons. I tried both keys and also tried to code it out and back in again, but its just not doing anything anymore. No easy entry and no more easy exit.

Any ideas would be hardly appreciated!

Maybe try re calibrating ur seat. Just search how to do that. Worth a shot.

[///M Houbi]

I tried a lot but all to no avail.

I ended up deleting my entire driver profile, then it just worked again perfectly.

Hope this doesn't happen again

[Jhnblckwood]

Originally Posted by ///M Houbi

I tried a lot but all to no avail.

I ended up deleting my entire driver profile, then it just worked again perfectly.

Hope this doesn't happen again

Nice!!

[///M Houbi]

I guess the issue was generated by my dealer. I had run-in service the day it stopped working. Maybe one of them did something in the wrong order or similar?

[Jhnblckwood]

Originally Posted by ///M Houbi

I guess the issue was generated by my dealer. I had run-in service the day it stopped working. Maybe one of them did something in the wrong order or similar?

It most likely was recorded by ur dealer but idk, just glad it's working now. Lol

[OHMFTX]

Originally Posted by tinha_net

I have just got my car back from the dealership and they have updated the software which wiped out all my previous coding to default. I am trying to redo the coding for the easy entry with the driver seat automatically shift back and forth when I am driving/exiting the vehicle.

These used to work before the software update from the dealership:

SM2 -> 3012 EAH -> EAH_VERFAHRWEG_SLV_PHYS = Werte=00, 28
SM2-> 3012 EAH -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = Werte=00, 3C

However they don't exist anymore after I got the car back and this is the only available function under 3012 EAH (please see attached screenshot):

SM2 -> 3012 EAH -> EAH_0_42_255

Does anyone have similar issues and know how to get the easy entry feature back?

Thanks and much appreciated for your help!

I have a same problem.

[s2kvee]

Any love for the 2012-2013 models?

[AK415]

Just did it on my F32, thank you everyone for the input!

[cjn]

I occasionally have the problem of the function just ceasing to operate. It seems to be somehow caused by getting in and out of the car too many times, and maybe doing something out of sequence. My fix is having a USB memory stick (with all my music) permanently plugged in under the armrest, with my driver profile also saved on it. Recalling the profile via the Settings menu always restores the function. The fact that it then wipes out half of my stored 1-8 button memories is another matter.

[shwrb]

Sorry to bring this post alive again..
Recently got myself another f30, previous one had manual seats.
New one has memory seats, under Settings ->Doors/lock: "Last seat position automatic" box is checked. I assumed it'll move my seat back/fourth but doesnt do anything.
My seats not that far back either. Would i still need to code this in order to get this functionality working?

Thanks

[Somebloke]

Originally Posted by shwrb

Sorry to bring this post alive again..
Recently got myself another f30, previous one had manual seats.
New one has memory seats, under Settings ->Doors/lock: "Last seat position automatic" box is checked. I assumed it'll move my seat back/fourth but doesnt do anything.
My seats not that far back either. Would i still need to code this in order to get this functionality working?

Thanks

Yes, needs coding. It’s in the last ECU in the Bimmercode app and on mine it’s now 3015 EAH instead of 3012 EAH.

[adm1nza1]

Originally Posted by Somebloke

Yes, needs coding. It’s in the last ECU in the Bimmercode app and on mine it’s now 3015 EAH instead of 3012 EAH.

Hi guys, noticed some of the cars has updated to latest ECU version and now 3015 EAH instead of 3012 EAH.

But for my car, i can't find EAH_VERFAHRWEG_SLV_PHYS and EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS only can find 3000 SM_GLOBAL -> EINAUSSTIEGSHILFE.

My car is activated with easy entry, i just want to find where is the code as before this someone did it for me.