Repair manual for 2016 f30?

lakeshorebrewer · 08-03-2020, 08:42 PM

I've searched all over and cannot find a service repair manual for our 2016 340ix. Not sure why it's not readily available.

Any thoughts or information to where I could find one would be greatly appreciated.

Cheers,

Ken

Billfitz · 08-03-2020, 09:36 PM

https://www.newtis.info/tisv2/a/en/f30-340i-xdrive-lim/

F32Fleet · 08-06-2020, 08:12 AM

Bentley will eventually release one. They just released the F3x for N20/N26/N55/N47

Billfitz · 08-06-2020, 08:32 AM

I find that newtis is just as good as my Bentley, which I now use mainly to collect dust.

thejeremyman9 · 08-06-2020, 11:22 AM

Quote:

Originally Posted by F32Fleet

Bentley will eventually release one. They just released the F3x for N20/N26/N55/N47

Where can i find this?

F32Fleet · 08-06-2020, 11:42 AM

Quote:

Originally Posted by thejeremyman9

Quote:

Originally Posted by F32Fleet

Bentley will eventually release one. They just released the F3x for N20/N26/N55/N47

Where can i find this?

http://www.bentleypublishers.com/bmw/

IraHayes · 08-08-2020, 09:07 AM

Quote:

Originally Posted by thejeremyman9

Where can i find this?

Got mine on Amazon

https://www.amazon.com/BMW-F30-F31-S...6895583&sr=8-1

thejeremyman9 · 08-09-2020, 01:52 PM

Quote:

Originally Posted by IraHayes

Got mine on Amazon

https://www.amazon.com/BMW-F30-F31-S...6895583&sr=8-1

Nice find, much cheapter there right now. I wish there was a electronic copy though too.

Billfitz · 08-09-2020, 02:41 PM

Read Post #2.

Solidjake · 08-15-2020, 12:58 PM

I'm not a fan of the Bentley manual at all. I agree with the amazon review on incorrect torque specs, vague steps, bad pics, etc. TIS is A LOT better and free.

apv97 · 08-20-2020, 09:06 PM

Quote:

Originally Posted by Solidjake

I'm not a fan of the Bentley manual at all. I agree with the amazon review on incorrect torque specs, vague steps, bad pics, etc. TIS is A LOT better and free.

What is TIS? I was thinking of buying the Bentley because it covers 6MT removal for which I can't seem to find any YouTube / forum thread walkthroughs.

thejeremyman9 · 08-20-2020, 11:50 PM

Quote:

Originally Posted by apv97

What is TIS? I was thinking of buying the Bentley because it covers 6MT removal for which I can't seem to find any YouTube / forum thread walkthroughs.

Quote:

Originally Posted by Billfitz

Read Post #2.

^

Dyna+ · 10-11-2020, 06:29 PM

TIS was just taken down!!! FAIL!!!

johnung · 10-11-2020, 07:20 PM

Quote:

Originally Posted by Billfitz

I find that newtis is just as good as my Bentley, which I now use mainly to collect dust.

Unfortunately BMW shut down newtis.info a few days ago. RIP 🙏

jv004 · 10-11-2020, 07:32 PM

$2500 annual subscription to new TIS is just crazy... does that include a round trip to BMW headquarters and work done on your car by their own engineers? joke aside, I guess this went the commercial route rather than a good DIY tool.

Solidjake · 10-14-2020, 03:34 PM

fffffffffuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu dge that the TIS is down are you kidding me

I should have tried to save/screenshot everything

thejeremyman9 · 10-14-2020, 08:00 PM

Quote:

Originally Posted by Solidjake

fffffffffuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu dge that the TIS is down are you kidding me

I should have tried to save/screenshot everything

I wonder if webarchives will have it?

Jeff_D · 06-19-2021, 06:01 PM

it looks like the webarchives include snapshots after they were taken down

here we are almost 8 months later and still no Bentley for 2016+ listed on their own website

So here's a question: how much use can a 2012-15 manual be for a 2016+?
Is it maybe usable on 1/2 the systems/parts?
Or maybe similar operations on some parts, but not the correct tolerances/torque's?

Inquiring 1st timer looking for DIY resource other than youtube...

08-03-2020, 08:42 PM	#1
lakeshorebrewer Registered 1 Rep 2 Posts Drives: 2016 340i Join Date: Jul 2019 Location: Spring Lake, MI iTrader: (0)	Repair manual for 2016 f30? I've searched all over and cannot find a service repair manual for our 2016 340ix. Not sure why it's not readily available. Any thoughts or information to where I could find one would be greatly appreciated. Cheers, Ken
	Appreciate 0 Tweet Quote

08-06-2020, 08:12 AM	#3
F32Fleet Lieutenant General 3570 Rep 10,351 Posts Drives: 2015 435i Join Date: May 2005 Location: Southeastern US iTrader: (0)	Bentley will eventually release one. They just released the F3x for N20/N26/N55/N47 __________________ "Drive more, worry less. " 435i, MPPK, MPE, M-Sport Line
	Appreciate 0 Quote

08-06-2020, 08:32 AM	#4
Billfitz Lieutenant General 8243 Rep 16,079 Posts Drives: '15 328iX GT Join Date: Jan 2015 Location: New Hampshire iTrader: (0)	I find that newtis is just as good as my Bentley, which I now use mainly to collect dust.
	Appreciate 1 F32Fleet3570.00 Quote

08-09-2020, 02:41 PM	#9
Billfitz Lieutenant General 8243 Rep 16,079 Posts Drives: '15 328iX GT Join Date: Jan 2015 Location: New Hampshire iTrader: (0)	Read Post #2.
	Appreciate 1 Polo088161610.00 Quote

08-15-2020, 12:58 PM	#10
Solidjake ¯\_(ツ)_/¯ 945 Rep 1,762 Posts Drives: '13 328i Msport 6MT Join Date: Jun 2009 Location: NYC/SNJ iTrader: (2)	I'm not a fan of the Bentley manual at all. I agree with the amazon review on incorrect torque specs, vague steps, bad pics, etc. TIS is A LOT better and free. __________________ Tensioner/belt DIY \| Side skirt extension DIY Apex SM-10/DWS06+ \| 400m/X-ice Xi3 \| Injen Exhaust \| Stoptech SS Lines \| 335 Front Brakes Hawk HPS 5.0 \| RBF600 \| ER Charge Pipes \| Wagner Evo Comp 2 FMIC
	Appreciate 1 F32Fleet3570.00 Quote

08-03-2020, 09:36 PM	#2
Billfitz Lieutenant General 8243 Rep 16,079 Posts Drives: '15 328iX GT Join Date: Jan 2015 Location: New Hampshire iTrader: (0)	https://www.newtis.info/tisv2/a/en/f30-340i-xdrive-lim/
	Appreciate 1 Polo088161610.00 Quote

10-11-2020, 06:29 PM	#13
Dyna+ New Member 48 Rep 22 Posts Drives: BMW 340i Join Date: Sep 2020 Location: Orange County CA iTrader: (0)	TIS was just taken down!!! FAIL!!!
	Appreciate 0 Quote

10-11-2020, 07:32 PM	#15
jv004 Captain 400 Rep 605 Posts Drives: X3M Comp Join Date: Apr 2013 Location: Northern California iTrader: (0)	$2500 annual subscription to new TIS is just crazy... does that include a round trip to BMW headquarters and work done on your car by their own engineers? joke aside, I guess this went the commercial route rather than a good DIY tool.
	Appreciate 0 Quote

10-14-2020, 03:34 PM	#16
Solidjake ¯\_(ツ)_/¯ 945 Rep 1,762 Posts Drives: '13 328i Msport 6MT Join Date: Jun 2009 Location: NYC/SNJ iTrader: (2)	fffffffffuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu dge that the TIS is down are you kidding me I should have tried to save/screenshot everything __________________ Tensioner/belt DIY \| Side skirt extension DIY Apex SM-10/DWS06+ \| 400m/X-ice Xi3 \| Injen Exhaust \| Stoptech SS Lines \| 335 Front Brakes Hawk HPS 5.0 \| RBF600 \| ER Charge Pipes \| Wagner Evo Comp 2 FMIC
	Appreciate 0 Quote

06-19-2021, 06:01 PM	#18
Jeff_D New Member 1 Rep 11 Posts Drives: BMW 340iX Join Date: Jun 2021 Location: NY iTrader: (0)	it looks like the webarchives include snapshots after they were taken down here we are almost 8 months later and still no Bentley for 2016+ listed on their own website So here's a question: how much use can a 2012-15 manual be for a 2016+? Is it maybe usable on 1/2 the systems/parts? Or maybe similar operations on some parts, but not the correct tolerances/torque's? Inquiring 1st timer looking for DIY resource other than youtube...
	Appreciate 0 Quote