[BimmerMad]

I'm looking to code the following in my F30 LCI.

I have a cable coming and have downloaded esys. Can anyone assist?

* Add current speed to BC
* Auto-fold mirrors on lock (currently need to hold lock button)
* Tyre pressure with temperatures
* iDrive startup emblem (M Logo)
* M Performance logo in left clock
* M Performance logo on clocks at startup
* Door handle lights on when in reverse

[atzebmw]

Kombi - BC_DIGITAL_V nicht_aktiv->aktiv =Digital Speed
FEM - KOMFORT_SCHLIESSEN Wert 0F=0,1sec = always auto fold mirrors
HU - RDC_DRUCK_TEMP nicht_aktiv -> druck_und_temperatur =tyre pressure+temp
HU - STARTUP_EMBLEM -> variant_01 = startup emblem M
Kombi - MPM_ENABLE nicht_aktiv -> aktiv = M-Performance Logo
FEM - OVT_BEI_RUECKFAHRLICHT nicht_aktiv->aktiv =door handle lights in reverse

[BimmerMad]

Originally Posted by atzebmw

Kombi - BC_DIGITAL_V nicht_aktiv->aktiv =Digital Speed
FEM - KOMFORT_SCHLIESSEN Wert 0F=0,1sec = always auto fold mirrors
HU - RDC_DRUCK_TEMP nicht_aktiv -> druck_und_temperatur =tyre pressure+temp
HU - STARTUP_EMBLEM -> variant_01 = startup emblem M
Kombi - MPM_ENABLE nicht_aktiv -> aktiv = M-Performance Logo
FEM - OVT_BEI_RUECKFAHRLICHT nicht_aktiv->aktiv =door handle lights in reverse

Thanks.

Is the startup emblem the one that's shown on the iDrive screen?

Is the M-Performance logo displayed under the left clock all the time or is this one displayed below and between the clocks when you first get in the car?

[Almaretto]

Originally Posted by RDowson

Thanks.

Is the startup emblem the one that's shown on the iDrive screen?

Is the M-Performance logo displayed under the left clock all the time or is this one displayed below and between the clocks when you first get in the car?

startup emblem is headunit screen boot animation.
Cluster (KOMBI) is the dash logo.

[BimmerMad]

Originally Posted by Almaretto

startup emblem is headunit screen boot animation.
Cluster (KOMBI) is the dash logo.

Where on the dash is the dash logo displayed? Is it on all the time or just on vehicle entry?

[BimmerMad]

Also, my car already auto-unfolds the mirrors on unlock and they fold when I hold the lock button on the key fob for a few seconds.

I'm looking for these to fold as soon as I press the lock button, rather than have to hold it for a few seconds.

[atzebmw]

Originally Posted by RDowson

Also, my car already auto-unfolds the mirrors on unlock and they fold when I hold the lock button on the key fob for a few seconds.

I'm looking for these to fold as soon as I press the lock button, rather than have to hold it for a few seconds.

As I have already written

FEM - KOMFORT_SCHLIESSEN Wert 0F=0,1sec = always auto fold mirrors

[vp]

Has anyone tried the Bimmercode app for iOS? http://f87.bimmerpost.com/forums/sho....php?t=1338157

[BimmerMad]

Originally Posted by atzebmw

As I have already written

FEM - KOMFORT_SCHLIESSEN Wert 0F=0,1sec = always auto fold mirrors

Just wanted to make sure that was wth a single press of the lock button and it a press and hold.

[BimmerMad]

Is this the dash logo?

[atzebmw]

Originally Posted by RDowson

Is this the dash logo?

Yes.
It can be seen shortly after opening the door.

[BimmerMad]

Originally Posted by atzebmw

Yes.
It can be seen shortly after opening the door.

Does it replace anything is it just an addition?

I'm sure my M135i had it.

[atzebmw]

Originally Posted by RDowson

Does it replace anything is it just an addition?

I'm sure my M135i had it.

No, because there is nothing displayed at this moment.
Or only the simple BMW-Logo.

[dazwhite]

Originally Posted by RDowson

Just wanted to make sure that was wth a single press of the lock button and it a press and hold.

I changed Werte=0F to Werte=00 to get the instant fold.

[Thisisdudewhoru]

Subs for future use

[BimmerMad]

Just tried to enable the M Performance logo on the Kombi. All seemed ok with esys but the original logo still shows. I also had to reset the date and time.

What did I do wrong? I set the following:

Kombi - MPM_ENABLE nicht_aktiv -> aktiv

[dazwhite]

Originally Posted by RDowson

Just tried to enable the M Performance logo on the Kombi. All seemed ok with esys but the original logo still shows. I also had to reset the date and time.

What did I do wrong? I set the following:

Kombi - MPM_ENABLE nicht_aktiv -> aktiv

No it should be:

KOMBI-3000-BMW_LOGO, change aq to mpm

[BimmerMad]

Originally Posted by dazwhite

No it should be:

KOMBI-3000-BMW_LOGO, change aq to mpm

Yep, figured that one out after posting. Thanks!

[BimmerMad]

Shouldn't the wert value for the mirrors folding straight away be 00, not 0F?

[Almaretto]

Originally Posted by RDowson

Shouldn't the wert value for the mirrors folding straight away be 00, not 0F?

Post #14

Keep in mind, though, that complete initiation delay removal negates ability to disable interior alarm sensor with double press of lock within 10s.