[sap1000]

i decided to do an ecu update after retrofitting a newer hu to car. i followed all the guides and it came up with error shortly into the update, i had clicked fem_gw, hu_entrynav, and zbe2 as they were required.
i vo coded the car to bring it out of safe mode and it couldn't get the car to start, there is no interior lights and the ignition comes up with error. there are other errors aswell. i tried to restore backup and it still doesn't work.
it looks like there is a problem with eps.

[sap1000]

if there is anyone near farnham/aldeshot who knows esys and could help figure this out there is some beer tokens on offer

[sap1000]

is there meant to be a true in the flash and coding for the ecus as 2 of them have false instead.

[sap1000]

i'm finally giving up been searching for nearly 4 hours, after checking hw ids from svt actual it shows that there is wrong data in the FEM_GW could this be my problem and how do i solve it.

[Mwahab]

i did not flash cars before, but did you tried to flash the same modules with the your old istep?

[Mwahab]

From the last screenshot, in the FEM_GW there are 2 different boots which i think thats the issue, try comparing the version with your backup

[sap1000]

i paid to get it sorted by someone on the forum in the end, my brain couldn't handle it in the end.
thanks for the reply.

[Mwahab]

Originally Posted by sap1000

i paid to get it sorted by someone on the forum in the end, my brain couldn't handle it in the end.
thanks for the reply.

Thank God you sorted it out man.
can you PM who is the hero who fixed it?