[music21050]

Originally Posted by Siki78

you will need BE and BF fsc if you dosen`t have it already

what is BE and BF fsc?

[Siki78]

-Kafas BE Front Collision Warning
-Kafas BF Pedestrian Detection

[shawnsheridan]

Originally Posted by music21050

'''I activated the line in the kombi with bimmercode
on the other hand I have no display in the hud, neither when stopped, nor while driving, is this normal?
do I have to do it with e-sys?

another question: can I display the turn signals in the hud?
thanks for help...

Asked and Answered:

Originally Posted by shawnsheridan

...

To enable in HUD, try FDL Coding

DKOMBI => HUD_TLC_ENABLE = aktiv

[music21050]

I coded with e-sys, "DKOMBI => HUD_TLC_ENABLE = aktiv" , but it doesn't change anything, I don't have anything displayed in the hud ....

[shawnsheridan]

Originally Posted by music21050

I coded with e-sys, "DKOMBI => HUD_TLC_ENABLE = aktiv" , but it doesn't change anything, I don't have anything displayed in the hud ....

Then it is not supported in your car.

[music21050]

thank you for the answer and the help provided
I'm just waiting for my new steering wheel, and I'll post for the result

[white328i]

Hi all,
My car originally fitted with Driver assistant Plus (Front Collision Warning, Pedestrian Detection & Lane departure warning). However after changing my steering wheel to M Sport (which does not comes with a module and vibrator in the steering), my lane departure warning was deactivated and each time I start my car it will displayed a warning on the deactivation.

I have tried to recycle the harness & module (black box) from my previous steering wheel and it able to eliminate the warning sign when starting my car, but this causes the horn to stop working because of the harness


So my question is, can I code via esys to make the warning message and fault to disappear while I am using the harness that comes with the M Sport steering wheel (which horn are working)?

Appreciate if anyone can advise the solution and have attempt to resolve the similar issue.

Thank you!

[shiftdnb]

Originally Posted by white328i

Hi all,
My car originally fitted with Driver assistant Plus (Front Collision Warning, Pedestrian Detection & Lane departure warning). However after changing my steering wheel to M Sport (which does not comes with a module and vibrator in the steering), my lane departure warning was deactivated and each time I start my car it will displayed a warning on the deactivation.

I have tried to recycle the harness & module (black box) from my previous steering wheel and it able to eliminate the warning sign when starting my car, but this causes the horn to stop working because of the harness


So my question is, can I code via esys to make the warning message and fault to disappear while I am using the harness that comes with the M Sport steering wheel (which horn are working)?

Appreciate if anyone can advise the solution and have attempt to resolve the similar issue.

Thank you!

Vibration Unit - 32-33-7-849-416
Module - 61-31-7-849-393 - Check your module number as you may already have this in the wheel already.
If the wheel has paddles you should be all set with the harness in there as it differs on having sport auto transmission or not.
Front Trim Pad - 32-30-7-850-622

[Siki78]

I will see first if you have heating steering wheel. If not then buy this 61317849392 module or you will have error in ista and you will not be able to turn this off.And you will need new wiring set 32307848337

[elettronicksportcar]

kombi
DISP_LDM_2_ALIVE: aktiv [01]
DISP_LDM_2_APPL: aktiv [01]
DISP_LDM_2_CRC: aktiv [01]
DISP_LDM_2_TIMEOUT: aktiv [01]
IBRAKE_VERBAUT: aktiv [01]

ST_TLC_ALIVE: aktiv [01]
ST_TLC_APPL: aktiv [01]
ST_TLC_TIMEOUT: aktiv [01]
TLC_VERBAUT: aktiv [01]

///////////////////////////////////////////////

FRM

LIN_PUBU_TLC: aktiv

///////////////////////////////////////////////

ICM

C_KOV_TLC_verbaut: verbaut [01]
C_Sperrtrigger_dynamisch_CTR_VIB_STW: aus [00]
C_Sperrtrigger_dynamisch_ST_COOR_VIB_STW: aus [00]

Verbau5AS_DriveAssist: verbaut [01]

//////////////////////////////////////////////////7

NBT

BRAKE_ASSISTANT_FCW: aktiv [01]
LANE_DEPARTURE_WARNING: aktiv [01]

///////////////////////////////////////////////////

[white328i]

Originally Posted by elettronicksportcar

kombi
DISP_LDM_2_ALIVE: aktiv [01]
DISP_LDM_2_APPL: aktiv [01]
DISP_LDM_2_CRC: aktiv [01]
DISP_LDM_2_TIMEOUT: aktiv [01]
IBRAKE_VERBAUT: aktiv [01]

ST_TLC_ALIVE: aktiv [01]
ST_TLC_APPL: aktiv [01]
ST_TLC_TIMEOUT: aktiv [01]
TLC_VERBAUT: aktiv [01]

///////////////////////////////////////////////

FRM

LIN_PUBU_TLC: aktiv

///////////////////////////////////////////////

ICM

C_KOV_TLC_verbaut: verbaut [01]
C_Sperrtrigger_dynamisch_CTR_VIB_STW: aus [00]
C_Sperrtrigger_dynamisch_ST_COOR_VIB_STW: aus [00]

Verbau5AS_DriveAssist: verbaut [01]

//////////////////////////////////////////////////7

NBT

BRAKE_ASSISTANT_FCW: aktiv [01]
LANE_DEPARTURE_WARNING: aktiv [01]

///////////////////////////////////////////////////

I have checked on the parameters:
Out of all the value only 3 codes is different:
FRM

LIN_PUBU_TLC: aktiv
///////////////////////////////////////////
ICM

Verbau5AS_DriveAssist: verbaut [01]
///////////////////////////////////////////
NBT

BRAKE_ASSISTANT_FCW: aktiv [01]

Rest of the codes has been set to "AKTIV" and "aus" as default.

Will update if these 3 code works to switch off the LDW warning in the absence of the module

Thank you.

[Oto]

Is it possible to buy FSC BF and BE somewhere for around 60 euros? I bought from this site
https://www.baum-bmwshop24.de/bmw-fs...2444948-73729/
7e, but I can't find BF and BE. Or can someone advise what the number is for BF and BE?
for 7E it is 66502444948. I can't find another FSC because I don't know the product number. Or can someone sell for about 60 euros?

[TheNine90]

Originally Posted by Oto

Is it possible to buy FSC BF and BE somewhere for around 60 euros? I bought from this site
https://www.baum-bmwshop24.de/bmw-fs...2444948-73729/
7e, but I can't find BF and BE. Or can someone advise what the number is for BF and BE?
for 7E it is 66502444948. I can't find another FSC because I don't know the product number. Or can someone sell for about 60 euros?

PM me i can provide both BF and BE FSC.

[labanauskas]

Hi!

Can I code LDW to stay always on, while i'll get buttons for it?

O is it possible to code LDW without 5AD VO, but only using FDL?

[TheNine90]

Its possible to code it manually but need to know the fdl for 5AD then use for LDW only

[labanauskas]

Yesterday I've done 5AS retrofit, but steering doesn't vibrate when crossing detected lanes without turn indicator. Any ideas? Faulty vibro motor? Or I've made mistake by coding both 5AD and 5AS?

[Siki78]

Originally Posted by labanauskas

Yesterday I've done 5AS retrofit, but steering doesn't vibrate when crossing detected lanes without turn indicator. Any ideas? Faulty vibro motor? Or I've made mistake by coding both 5AD and 5AS?

Just one of this can be code so 5AS or 5AD not both

[labanauskas]

Originally Posted by Siki78

Just one of this can be code so 5AS or 5AD not both

Thank you! 5AD is for pre lci... Can you tell which ecus should be coded? I did on dsc, icm, fem, hu, kafas2, kombi.

[Siki78]

Read with ista and write error here. This coding should be enogh