PSdZData Full vs. Lite

shawnsheridan · 10-10-2018, 04:34 PM

Quote:

Originally Posted by pcp1234

i keep getting this error on EPS, any reason or guidance please?

[EPS - 30] - [Exception - EPS - 30] SVK-Ist does not match expected SGBMIDs for ecu ECUId:EPS_0x30. Excpected (relevant process classes only): [hwel_00000e1c-001_004_005, hwap_00000e21-255_255_255, hwap_000002be-255_255_255], Actual (relevant process classes only): [hwel_00000e1c-001_004_000, hwap_00000e21-255_255_255, hwap_000002be-255_255_255], Missing SGBMID(s): [hwel_00000e1c-001_004_005], Surplus SGBMID(s): [hwel_00000e1c-001_004_000]

Wrong I-Step Shipment for EPS Module.

pcp1234 · 10-10-2018, 04:49 PM

hyyy, it didnt like F010-18-03-530 or F010-18-07-530. I step current F010-13-11-504.

did it even update at all? or was it refused in the end ?

shawnsheridan · 10-10-2018, 05:00 PM

Quote:

Originally Posted by pcp1234

hyyy, it didnt like F010-18-03-530 or F010-18-07-530. I step current F010-13-11-504.

did it even update at all? or was it refused in the end ?

No. When I-Step shipment is correct, EPS HWEL in svt_soll will be Black, not Red / Blue.

pcp1234 · 10-10-2018, 05:15 PM

ok, i get it. how do i know what shipment level EPS is now?

shawnsheridan · 10-10-2018, 05:27 PM

Quote:

Originally Posted by pcp1234

ok, i get it. how do i know what shipment level EPS is now?

If ECU is not original to car, then it is a guessing game.

pcp1234 · 10-10-2018, 05:29 PM

ECU is from factory as I am first owner. I remember I had updates on car back in March 2018. Could it mean that there were no updates since then and car is happy with shipment level on EPS as it is ?

shawnsheridan · 10-10-2018, 05:30 PM

Quote:

Originally Posted by pcp1234

ECU is from factory as I am first owner. I remember I had updates on car back in March 2018. Could it mean that there were no updates since then and car is happy with shipment level on EPS as it is ?

Then it is easy. I-step shipment is that of car as shown in VCM.

pcp1234 · 10-10-2018, 05:36 PM

i believe it was just updated via esys back then.

i also updated several modules as per previous posts and car is still saying that current I level is F010-13-11-504.

shawnsheridan · 10-10-2018, 06:17 PM

Quote:

Originally Posted by pcp1234

i believe it was just updated via esys back then.

i also updated several modules as per previous posts and car is still saying that current I level is F010-13-11-504.

Not sure what that has to do with anything. You are talking about I-Step Current, while I am talking about I-Step Shipment. And as far as your I-Step Current goes, unless dealer programmed entire car with ISTA/P, or you updated VCM with E-Sys to specifically read a different I-Step Current, it will not be updated.

pcp1234 · 10-14-2018, 04:40 PM

how to deal with such instance please? i thought that I should work on shipment values which looks like March 2013, where as current says Nov 2017

shawnsheridan · 10-14-2018, 04:52 PM

Quote:

Originally Posted by pcp1234

how to deal with such instance please? i thought that I should work on shipment values which looks like March 2013, where as current says Nov 2017

I-Step Shipment is F010-12-03-511. I don't understand the confusion.

pcp1234 · 10-14-2018, 04:55 PM

why is current, last and shipment different from each other?

my target is F010-18-07-530; which is my latest psdzdata file

shawnsheridan · 10-14-2018, 05:00 PM

Quote:

Originally Posted by pcp1234

why is current, last and shipment different from each other?

my target is F010-18-07-530; which is my latest psdzdata file

Because car has been programmed at least two times since it left factory.

HaugF30 · 10-15-2018, 03:36 PM

Do i need Full Psdzdata to upgrade the I-Step on my car? and can i upgrade every modules except the Cic? (Since i have retrofitted NBT with emulator)

And if so, can i upgrade the Lite version to full? and do someone have a step by step guide to update the I-Step level?

I know i need to have a Power Supply, is maas sps-9400 40A enough for my F11 530D?

My I-Step version is F010-10-09-510

shawnsheridan · 10-15-2018, 03:53 PM

Quote:

Originally Posted by HaugF30

Do i need Full Psdzdata to upgrade the I-Step on my car? and can i upgrade every modules except the Cic? (Since i have retrofitted NBT with emulator)

And if so, can i upgrade the Lite version to full? and do someone have a step by step guide to update the I-Step level?

I know i need to have a Power Supply, is maas sps-9400 40A enough for my F11 530D?

My I-Step version is F010-10-09-510

You need PSdZData Full. PM sent.

Flash any, all, or any number of ECU's in between:

E-Sys - Flashing ECU Guide v.1.0.1.pdf:
https://mega.nz/#!VwIzGJJY!oHCQrh-ax...syn-9eEytBH1qo

M1500Z · 10-15-2018, 08:32 PM

Howdy, shawnsheridan , could I get a link to latest the PSdZData Lite? I believe this should allow me to code in Euro MDM and M2CS EPS, correct?

shawnsheridan · 10-15-2018, 08:34 PM

Quote:

Originally Posted by M1500Z

Howdy, shawnsheridan , could I get a link to latest the PSdZData Lite? I believe this should allow me to code in Euro MDM and M2CS EPS, correct?

PM sent.

HaugF30 · 10-16-2018, 10:29 AM

Quote:

Originally Posted by pcp1234

updated another car yesterday, below time stats; was F010-13-07-506 to F010-18-07-530
1. ZGW = 3m 7sec
2. EGS = 2m 28sec
3. DSC = 4m 28sec
4. PDC + JBBD = 1m 42sec
5. EKPM = 1m 31sec
6. FZD = 2m 22sec
7. FRM = 4m 43sec
8. TBX + ZBE = 3m 10sec
9. TRSVC = 4m 37sec
10. SZL + EMF = 1m 54sec
11. EPS = 1min 32sec
12. HKMF = 1min 37sec
13. TCB = 12min 53sec
14. SM = 3m 6sec
15. DME + KM = 6min 45sec

overall 55mins and 55sec

Is this with Enet cable?

pcp1234 · 10-16-2018, 10:33 AM

yes it is mate. just left with HU-NBT to do

pcp1234 · 10-20-2018, 03:20 PM

has anyone got this file and could send it to me please? also i would need telling location i where i need to put file in please

btld_00000467-013_002_000

its for TRSVC for F10

Sean750 · 10-22-2018, 08:49 AM

Hi Shawn, my car got recently upgraded and now my psdzdata is obsolete. Can you provide me with a link to the newest psdzdata_lite? Thanks in advance.

atzebmw · 10-22-2018, 09:16 AM

Quote:

Originally Posted by Sean750

Hi Shawn, my car got recently upgraded and now my psdzdata is obsolete. Can you provide me with a link to the newest psdzdata_lite? Thanks in advance.

https://www.bimmerfest.com/forums/sh...d.php?t=983244

10-10-2018, 04:49 PM	#640
pcp1234 Private 27 Rep 87 Posts Drives: G03 Join Date: Jul 2018 Location: Leeds iTrader: (0)	hyyy, it didnt like F010-18-03-530 or F010-18-07-530. I step current F010-13-11-504. did it even update at all? or was it refused in the end ?
	Appreciate 0 Quote

10-10-2018, 05:15 PM	#642
pcp1234 Private 27 Rep 87 Posts Drives: G03 Join Date: Jul 2018 Location: Leeds iTrader: (0)	ok, i get it. how do i know what shipment level EPS is now?
	Appreciate 0 Quote

10-10-2018, 05:29 PM	#644
pcp1234 Private 27 Rep 87 Posts Drives: G03 Join Date: Jul 2018 Location: Leeds iTrader: (0)	ECU is from factory as I am first owner. I remember I had updates on car back in March 2018. Could it mean that there were no updates since then and car is happy with shipment level on EPS as it is ?
	Appreciate 0 Quote

10-10-2018, 05:36 PM	#646
pcp1234 Private 27 Rep 87 Posts Drives: G03 Join Date: Jul 2018 Location: Leeds iTrader: (0)	i believe it was just updated via esys back then. i also updated several modules as per previous posts and car is still saying that current I level is F010-13-11-504.
	Appreciate 0 Quote

10-14-2018, 04:40 PM	#648
pcp1234 Private 27 Rep 87 Posts Drives: G03 Join Date: Jul 2018 Location: Leeds iTrader: (0)	how to deal with such instance please? i thought that I should work on shipment values which looks like March 2013, where as current says Nov 2017
	Appreciate 0 Quote

10-14-2018, 04:55 PM	#650
pcp1234 Private 27 Rep 87 Posts Drives: G03 Join Date: Jul 2018 Location: Leeds iTrader: (0)	why is current, last and shipment different from each other? my target is F010-18-07-530; which is my latest psdzdata file
	Appreciate 0 Quote

10-15-2018, 03:36 PM	#652
HaugF30 Private 0 Rep 59 Posts Drives: Bmw F30 Join Date: Jul 2018 Location: Norway iTrader: (0)	Do i need Full Psdzdata to upgrade the I-Step on my car? and can i upgrade every modules except the Cic? (Since i have retrofitted NBT with emulator) And if so, can i upgrade the Lite version to full? and do someone have a step by step guide to update the I-Step level? I know i need to have a Power Supply, is maas sps-9400 40A enough for my F11 530D? My I-Step version is F010-10-09-510
	Appreciate 0 Quote

10-15-2018, 08:32 PM	#654
M1500Z First Lieutenant 423 Rep 340 Posts Drives: a white BMW Join Date: Oct 2018 Location: TX iTrader: (4)	Howdy, shawnsheridan , could I get a link to latest the PSdZData Lite? I believe this should allow me to code in Euro MDM and M2CS EPS, correct?
	Appreciate 0 Quote

10-16-2018, 10:33 AM	#657
pcp1234 Private 27 Rep 87 Posts Drives: G03 Join Date: Jul 2018 Location: Leeds iTrader: (0)	yes it is mate. just left with HU-NBT to do __________________ Codings; navigation updates; carplay; software updates; retrofits https://www.instagram.com/bimmer_werks86/
	Appreciate 0 Quote

10-20-2018, 03:20 PM	#658
pcp1234 Private 27 Rep 87 Posts Drives: G03 Join Date: Jul 2018 Location: Leeds iTrader: (0)	has anyone got this file and could send it to me please? also i would need telling location i where i need to put file in please btld_00000467-013_002_000 its for TRSVC for F10
	Appreciate 0 Quote

10-22-2018, 08:49 AM	#659
Sean750 New Member 22 Rep 27 Posts Drives: 420iA High Exec M Sport Editon Join Date: Apr 2018 Location: Europe iTrader: (0)	Hi Shawn, my car got recently upgraded and now my psdzdata is obsolete. Can you provide me with a link to the newest psdzdata_lite? Thanks in advance.
	Appreciate 0 Quote