[Polo08816]

Shawn, would you be able to PM me a link to ediabas?

[shawnsheridan]

Originally Posted by Polo08816

Shawn, would you be able to PM me a link to ediabas?

PM sent.

[Manulap92]

Originally Posted by shawnsheridan

I code Kombi all the Time, in many, many cars, and never get CEL error.

You don't get CEL error when coding Kombi , is it because you code Kombi (and all others modules except DDE/DME) with engine running ?

[Lucardos]

Hi shawn,

I also need a link to the latest Tool32. I have some errors after coding.

Is it just F01 that will do the trick in Tools32?

[shawnsheridan]

Originally Posted by Lucardos

Hi shawn,

I also need a link to the latest Tool32. I have some errors after coding.

Is it just F01 that will do the trick in Tools32?

Yes, F01.prg is all you need.

PM sent.

[Lucardos]

Hi Swan,

thanks,unfortunately I don't get the errors away.
I accidentally VO coded all ECU instead of only the needed for 3AG.

I now have error Drivetrain and fuel pomp.

any option that I have?

[shawnsheridan]

Originally Posted by Lucardos

Hi Swan,

thanks,unfortunately I don't get the errors away.
I accidentally VO coded all ECU instead of only the needed for 3AG.

I now have error Drivetrain and fuel pomp.

any option that I have?

Does your DME module have CAFD with Green Dot?

[Lucardos]

Originally Posted by shawnsheridan

Does your DME module have CAFD with Green Dot?

there's no green dot. it seems that I'm missing the CAFD.
How can I solve this?

[shawnsheridan]

Originally Posted by Lucardos

there's no green dot. it seems that I'm missing the CAFD.
How can I solve this?

I suspected as much. You must inject CAFD into DME and then VO Code it.

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on DME => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown => Select OK => Right-Click on DME (the ECU itself not the underlying CAFD) => Select CODE.

With DME, Motor cannot be running when you code it.

[K320]

Do i need to buy the token to only do the reset?

[shawnsheridan]

Originally Posted by Kendroz

Do i need to buy the token to only do the reset?

You don't need to buy a Token for anything anymore as TokenMaster released free E-Sys Launcher Application with built in Token Generator.

[K320]

Great. I believe i must check my version of esys. Will post info later so i can start checking my car. Thanks shawn.

[K320]

This is the version of e-sys i have:
What else do i need to start the coding?
Thanks

[shawnsheridan]

Originally Posted by Kendroz

This is the version of e-sys i have:
What else do i need to start the coding?
Thanks

PSdZData and an ENET Cable to go with E-Sys.

[K320]

Great! Gonna try on weekend and let you know.
Have a great day and thanks or in spanish gracias

[Coolala]

Hi Shawn,

Could you send me the download link of latest Ediabas? Actually, I need tool32 for erasing error code. I'm using 32bit Windows. Mine is F20, is it correct for me to select 01.prg or other .prg?

Thanks!

[Coolala]

Shawn,

I have another question and I'm sorry that I have so many questions.
I found you mentioned ISTA/D Reingold, which is a diagnostic tool. Do you know where I can get this?

Thanks again!

[shawnsheridan]

Originally Posted by Coolala

Hi Shawn,

Could you send me the download link of latest Ediabas? Actually, I need tool32 for erasing error code. I'm using 32bit Windows. Mine is F20, is it correct for me to select 01.prg or other .prg?

Thanks!

Originally Posted by Coolala

Shawn,

I have another question and I'm sorry that I have so many questions.
I found you mentioned ISTA/D Reingold, which is a diagnostic tool. Do you know where I can get this?

Thanks again!

Use F01.prg.

PM sent.

[f32_jon]

Originally Posted by shawnsheridan

PM sent.

Can you please send me the link to EDIABAS too? Thanks!

[shawnsheridan]

Originally Posted by f32_jon

Can you please send me the link to EDIABAS too? Thanks!

PM sent.

[Coolala]

Originally Posted by shawnsheridan

Use F01.prg.

PM sent.

Cool!

Shawn, you are the best!

[Lucardos]

Originally Posted by shawnsheridan

I suspected as much. You must inject CAFD into DME and then VO Code it.

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on DME => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown => Select OK => Right-Click on DME (the ECU itself not the underlying CAFD) => Select CODE.

With DME, Motor cannot be running when you code it.

Hi Shawn,

thanks for your help. I was able to fix this problem.

I only have one problem that i don't get away. After coding my rear PDC stopped working. every time i put it in reverse i get error "no parking assistance, have the problem checked by service"

I already have put the old CAFD for Hu-CIC and REM, but the problem remains.
any suggestions?

Lucardos