[jkwhar]

Long story short, I removed my adaptive xenon headlights, removed 522 and 524 from VO and coded FEM. My car still throws "adaptive headlight malfunction" and the error for auto leveling sensor. I dont get any error messages when coding. Am I missing something?

thanks!

[atzebmw]

Also code the ICM.

[jkwhar]

Originally Posted by atzebmw

Also code the ICM.

I code ICM, kombi, rem, hu-cic, etc since I had other retrofits pulled.

EDIT:
I just tried coding again with a different version of esys 3.31. The FEM from what I remember dips the mirror when reinitializing but it doesnt do that.

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

Read SVT before TAL execution started.
Read SVT before TAL execution finished.

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2020/09/17-08:50:57.719
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[FEM_BODY - 40] prepareECUforCoding started [PROGRESS]
[FEM_BODY - 40] prepareECUforCoding finished [PROGRESS]
[FEM_BODY - 40] authenticateECUforCoding started [PROGRESS]
[FEM_BODY - 40] authenticateECUforCoding finished [PROGRESS]
[FEM_BODY - 40 - cafd_00000794-016_066_012] Transaction type: cdDeploy; Message: TA started [TRANSACTION]
[FEM_BODY - 40 - cafd_00000794-016_066_012] Transaction type: cdDeploy; Message: TA finished [TRANSACTION]
[FEM_BODY - 40] finalizeECUCoding started [PROGRESS]
[FEM_BODY - 40] finalizeECUCoding finished [PROGRESS]
[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "Finished". [C207]
TAL execution finished. Duration: "7s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.
Abarbeitung beendet

[atzebmw]

That‘s strange.
I see no problems.
And yes you‘re right- if you code the FEM the mirrors dip up and down.

[jkwhar]

Originally Posted by atzebmw

That‘s strange.
I see no problems.
And yes you‘re right- if you code the FEM the mirrors dip up and down.

Yep, its an odd one. So I tried inject CAFD and then code. no error, all green and still threw the error on idrive. pulled the battery and let it sit for an hour, started the engine and it all went away. The car is gone now as of an hour ago. so this ends my f30!

Thanks for your help!

[jkwhar]

Originally Posted by kobol

It's can be done remote. contact me

Got it resolved and the car is sold. Thanks!