[AbzzMonsur]

Originally Posted by BimmerSI

Hi,

i just done it yesterday! It works great and it is simple to use.

1. Click on "Connect to HU" button. On bottom left it shoud say "Job Status OK".



2. Select date. You should change ";" with "/" and use european date format like DD/MM/YYYY. Then put in your milage.
Select dealer number. I entered 00000, becasue service has been done by independent dealer and still selected "BMW Dealer" because he works with BMW exclusivly.

3. Then select number of tasks that were performed. This will unlock service task selection.

4. After that, just click to "Write to HU" button and check that the "Job Status OK" is present.



5. Now check on your iDrive. Service listing should be on the bottom. If you want "proper" listing, you should delete all entries and write them one by one backwards.

I hope it helps!

Cheers,

BimmerSI

Hi,

Does anyonr have the HU-Service Manager zip files? Can't locate it on original website anymore

[Sasquartch]

Originally Posted by Joshd63

Hi

Is there any chance you could end me the file also if I give you a onedrive link?

Cheers

Send me a link

[Sasquartch]

Originally Posted by producerlawson

I used this early last year - works a treat if you know how to setup the serial com ports.

I personally found my E-Sys OBD cable didn't work - I had to get a DCAN serial to usb cable which enabled me to work. As others have said, it's all about editing the EDIABAS.INI file to match your pc serial port - sharing the file may not necessarily work as not everyone has the same hardware plugged in/ports in use.

Make sure you take a photo of your edits, as at the next service the dealer will wipe all entries and enter what they're given from the BMW server logs.

No serial ports involved as it's a TCP/IP connection over an ethernet interface

As long as your esys cable works this should too

[fortythirtyfive]

Originally Posted by Sasquartch

No serial ports involved as it's a TCP/IP connection over an ethernet interface

As long as your esys cable works this should too

Yeah my ICOM cable for coding in applications such as E-Sys is functional, but when using apps such as edibas and toolset32 I faced errors and problems.

To my knowledge I thought ediabas applications required a K DCAN cable? I'm sure it's in the requirement section of the manual due to the nature of them containing the FT232RL chips.

Whenever I tried via an ICOM connection I would hit errors whilst trying to apply the new service information. This stopped the second I switched to a KDCAN cable which uses a serial port to allow the transfer of more data.

https://www.ebay.co.uk/itm/For-BMW-I...MAAOSw~7ZbNtqP

[Sasquartch]

As far as I know all F series cars use an ethernet interface, the older cables like you linked to were used on the older E series cars and needed serial port emulation and connected to the computer using USB.
An ethernet cable goes directly between the OBD port on the car and the ethernet port on the computer with no electronics in between
The fact that I have it working with my EDIABAS.INI file containing the line :

Interface =ENET

seems to confirm this

Not entirely sure what an ICOM interface although I've heard it's used on E90 and similar generation cars

I have had this working on several different cars (F30 and F34)

[mashaw]

Hi Guys

Im new to the forum, just about to start a retro fit on my F31 and wanted to update the service history, from what i've read I need to HU Service Manager. Can anyone point me in the direction on where I can download this

[HFW003]

Originally Posted by Sasquartch

I have a zipped up copy of the Service Manager and EDIABAS files that I used

It's 80 MB or so

If you can provide a FTP site or Google Drive /Dropbox or something I'm sure I can send the files to you

Would you mind sharing with me also?

Thanks

[dy63]

is there a link to the HU Service Manager?

[jkwhar]

When was service history introduced? I've seen this menu in the idrive (MY 4/13).

[Sasquartch]

Originally Posted by IK6SPEED

Then why bother

So you can enter everyone back in again

[ThEdOvEz]

hi please could someone give me a link to these files? thankyou

it ok now i managed to find them and worked a treat thanks

[jjan]

Hello, can anyone please sent a link to download?

Thanks in advance )

[atzebmw]

Originally Posted by jjan

Hello, can anyone please sent a link to download?

Thanks in advance )

At google search for "hu service manager".
For me it is the 3rd search result (drive2.ru).

[pcp1234]

mine wont even connect to unit. any tips how to get it to work please?

[Sasquartch]

Originally Posted by pcp1234

mine wont even connect to unit. any tips how to get it to work please?

Firstly you need to check you have basic connectivity. Do you have esys or ISTA or anything else that connects to the car OK ?

Have you worked through all the posts in this thread ?

Is your ediabas.ini file correct, ie is the connection type set correctly ?

[pcp1234]

- my ediabas, esys, ista d, ista p works ok + flashing ECUs works fine too
- INTERFACE = ENET
- #INTERFACE = REMOTE
- I have downloaded version with java and without java.
- my machine runs java 8 update181 x86 and x64
- i placed program in random folder and ediabas too
- batch file with download doesnt seem to be doing anything

please help me

[Sasquartch]

You need to provide more information

What does happen ?

[pcp1234]

this happens absolutely nothing


al203 compound name

[pcp1234]

ok, i got to work and since no one was willing to assist i will write up how to make it work!
1. download hu service manager
2. unpack content like this -> C:\EC-APPS\BMW-HU-ServiceManager
3. in folder "BMW-HU-ServiceManager" should be four items: folder "jre", HU-ServiceManager, HU-ServiceManager ico, HU-ServiceManager jar
4. make a shortcut from HU-ServiceManager.bat to your desktop
5. right click on created shortcut and go into properties
6. change icon and select HU-ServiceManager.ico (cosmetic job)
7. connect cable to car, then to laptop and run HU-ServiceManager from the shortcut on your desktop
8. click connect to hu
9. wait for "famous" screen with confirmation "job status complete"
10. enjoy your changes from now on

kind note
i had to restart my nbt in order to see change

[Sasquartch]

Originally Posted by pcp1234

and since no one was willing to assist

Not really true, if you provided the relevant information you may well have had an answer

[ir655]

Hello guys, I finally got this up and running but when I press "Connect to HU" I get the following message in the box below: "13 IFH-0003 Datatransmission to interface disturbed".

I have ISTA-D installed and it connects to the car without remark. I can even connect to ESYS with the ENET cable I have.

Any ideas? :-/

[Sasquartch]

Originally Posted by ir655

Hello guys, I finally got this up and running but when I press "Connect to HU" I get the following message in the box below: "13 IFH-0003 Datatransmission to interface disturbed".

I have ISTA-D installed and it connects to the car without remark. I can even connect to ESYS with the ENET cable I have.

Any ideas? :-/

Is your ediabas.ini file definitely correct, ie set to ethernet (ENET) ?