10-31-2018, 10:55 AM | #1 |
New Member
1
Rep 9
Posts |
No audio after NBT retrofit
Hi All,
Hopefully someone may be able to help. I have completed my NBT retorfit this morning into my 2013 F34. I came from HU_entry and had DAB radio. Installed the new screen and NBT, however there is no sound on either radio or when I call someone I can't hear anything (so not just an issue with radio). USB and reversing camera all works ok which is positive. I've connected everything properly into the NBT, does anyone have any ideas on what could be the issue? I haven't moved any wires in the quadlock, am I meant to? Thanks, any help greatly appreciated! |
10-31-2018, 11:23 AM | #2 | |
Enlisted Member
8
Rep 48
Posts |
Quote:
That NBT has either come from a car that has an amplifier or upgraded sound system and needs to be coded in to accept your system Or it could be the other way round, you may have an amplifier but that nbt may have come from a stock car It just needs to be coded accordingly |
|
Appreciate
1
Bayliss021.00 |
10-31-2018, 01:15 PM | #4 | |
New Member
1
Rep 9
Posts |
Quote:
Thanks for replying SuhaibD98, will look into the coding and see if that does the job |
|
Appreciate
0
|
10-31-2018, 02:20 PM | #6 | ||
Enlisted Member
8
Rep 48
Posts |
Quote:
Let me know how it goes! |
||
Appreciate
0
|
11-01-2018, 10:12 PM | #7 |
Second Lieutenant
54
Rep 202
Posts
Drives: 2011 M3 6sp
Join Date: Nov 2018
Location: Florida
|
With the NBT retrofit if you have hifi audio l remember reading somewhere that the amp trigger wire would need to be tapped so it would turn on with the car or something of the sort.
|
Appreciate
0
|
11-01-2018, 10:58 PM | #8 |
BimmerPost Supporting Vendor
665
Rep 1,976
Posts
Drives: 2020 G20 320i M Sport
Join Date: Apr 2010
Location: Canada & HK
|
Send me the VIN of your car and the donor car and I should be able to make a file that can change the amp for you. You will need a working USB port on the NBT
|
Appreciate
1
obert1781.00 |
11-02-2018, 11:28 AM | #9 | ||
New Member
1
Rep 9
Posts |
Quote:
Quote:
Cheers |
||
Appreciate
0
|
02-11-2020, 05:49 PM | #10 | |
Enlisted Member
7
Rep 33
Posts |
Quote:
Apologies for resurrection of this post. I've recently fitted nbt in my f20, it has an amp in the boot (left hand side). But I only get sound when my car engine is running, I get no sound if I'm sat with just the ignition turned on, screen etc powers up fine, though. |
|
Appreciate
0
|
02-13-2020, 08:50 AM | #11 | |
New Member
2
Rep 10
Posts |
Quote:
|
|
Appreciate
0
|
02-14-2020, 01:26 AM | #12 | ||
Enlisted Member
7
Rep 33
Posts |
Quote:
|
||
Appreciate
0
|
02-16-2020, 07:05 AM | #13 |
New Member
2
Rep 10
Posts |
|
Appreciate
0
|
02-17-2020, 04:29 AM | #14 |
Enlisted Member
7
Rep 33
Posts |
You need a 'add a fuse' tap into small black wire on amp wire, then to fuse box
|
Appreciate
0
|
02-18-2020, 04:18 AM | #15 |
New Member
2
Rep 10
Posts |
|
Appreciate
0
|
03-04-2022, 05:52 PM | #16 |
New Member
2
Rep 22
Posts |
|
Appreciate
0
|
01-25-2024, 03:29 PM | #17 | |
Registered
0
Rep 1
Posts |
Quote:
@Steve can you send me also an file if I send you the VIN's? Thanks |
|
Appreciate
0
|
01-31-2024, 11:36 PM | #18 |
Enlisted Member
48
Rep 32
Posts |
My NBT retrofit did the same thing, I'm pretty sure it was because the donor car had HiFi but my car is Harmon Kardon. As soon as I VO coded the NBT with my car's build, it worked.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|