[Polo08816]

Originally Posted by Phyrexia

FWIW my Bosch unit looked absolutely identical to the OE unit I replaced. Bosch makes them for BMW.

I noticed the fuel rail for EU5 was different than EU6. I don't suppose this matters in the context of a full injector swap. But my car has fuel lines to each injector integrated in the rail. The EU5 models have separate fuel lines that are fastened to the rail. Again, this could be different for the N20.

Negative. I have EU6 injectors on my N55 and individual fuel lines fastened to the fuel rail.

[Phyrexia]

Originally Posted by Polo08816

Negative. I have EU6 injectors on my N55 and individual fuel lines fastened to the fuel rail.

There are two part numbers here, 13537628049, which is NLA, and 13537649710, which is the new EU6 rail. https://www.realoem.com/bmw/enUS/sho...diagId=13_1497

Perhaps your car has been previously converted to EU6. Or perhaps there was an intermediate period where EU6 injectors were installed on the seven piece fuel rail. My car has the single piece fuel rail, 13537649710, not the rail that works with the six fuel lines, 13537628049.

[Haveyouseenjay]

Originally Posted by Phyrexia

FWIW my Bosch unit looked absolutely identical to the OE unit I replaced. Bosch makes them for BMW.

I noticed the fuel rail for EU5 was different than EU6. I don't suppose this matters in the context of a full injector swap. But my car has fuel lines to each injector integrated in the rail. The EU5 models have separate fuel lines that are fastened to the rail. Again, this could be different for the N20.

Yea I know they make the injectors. As far as the fuel line, the injector lines are welded to the rail individually

[Tyomni]

Originally Posted by Polo08816

It's likely due to the dependencies required to run it. All the Microsoft Visual Studio C++ redistributable packages, etc.

I did not use original BMW injectors. The price difference between Bosch and Genuine injectors was substantial. It made going with Bosch an easy choice and worth the risk. If the price was close enough, I would have just gone with Genuine.

I am struggling with this too, is there any difference between them? Since both are manufactured by Bosch.....

[Tyomni]

Originally Posted by Haveyouseenjay

Yea, about a $200+ difference.
I'll keep posted once I complete everything and do a couple test runs

Please provide a feedback, were they any different?

[MAKH 5]

Originally Posted by Tyomni

Please provide a feedback, were they any different?

Just recently changed out all my injectors (2015 335). Purchased the OEM Bosch (EU6)replacements from FCP Euro. They are literally the same exact injector. Just no BMW logo.

Installed them myself and had my shop code them. All good for i think a month now.