F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > N55 Turbo Engine / Drivetrain / Exhaust Modifications > Anyone with the Active Auto Flash tune dyno there car yet?
ARMA SPEED
Post Reply
 
Thread Tools Search this Thread
      03-29-2018, 11:45 AM   #23
FSociety
IG @bmwF9xG80
FSociety's Avatar
3810
Rep
7,594
Posts

Drives: G80 M3, X4M, G07 X7m50
Join Date: Apr 2012
Location: NYC to NJ to Orlando FL

iTrader: (3)

Garage List
2023 BMW G80 M3  [0.00]
2020 BMW X4MC  [0.00]
16' BMW X4 M40i  [10.00]
06 Cadillac STS  [0.00]
Quote:
Originally Posted by raichean View Post
Any last minute advice before Saturday? I think I have my logs all setup with the suggested values. I have also slightly brushed off the rest on my excel skills on my test log, so I can graph out multi-axis values and actually show them simultaneously.

Also, I *assume* the pulls should be in 4th gear (6MT)? Thought I would double check.. my stock pulls a year ago were on the suggestion of the shop then. My last runs were one in 3rd, and 2 in 4th.

I am going to run logs, plus interior and exterior video just for fun and will compile the video and share that and the logs and dyno graphs here.
4th gear all runs if stock FMIC
5th gear all runs if FMIC/DP

Have Dyno operator start progressively at 2000 rpm and logging the dyno run until 6900rpm no less no more

Last but not least, bring a usb thumb drive so you can put your Dyno files in there
Quote:
Originally Posted by F30_SixSpeed View Post
5th gear will yield the most accurate (and usually higher) numbers. It is the 1:1 gear ratio on the 6MT. I would do them in 5th.

Only downfall is if on stock intercooler, car will heatsoak a bit more up top and if the speed limiter is not removed (assuming yours is) it will hit the speed limiter.
100% i would dyno in 4th gear if on stock IC for sure

You gotta turn off DSC Off ? since car will prob cut or spin on rollers in Sport+ right?

A few things he can manipulate
- Letting car cool off with hood open
- Cool temps at Dyno or and good air-flow will help
- Leave hood open on Dyno
__________________
60-130mph 6.5s X4M #HCP
60-130mph 5.0s G80 M3 #OrlandoAutowerks Sauce

IG: @bmwF9XG80

Appreciate 2
ceedawg466.00
SeanWRT3179.00
      03-29-2018, 11:55 AM   #24
BMW DIY Guy
Colonel
BMW DIY Guy's Avatar
United_States
3002
Rep
2,989
Posts

Drives: 2019 M2 Competition
Join Date: Jan 2017
Location: Maple Valley WA

iTrader: (1)

Garage List
2024 BMW M2  [9.75]
2017 BMW X1  [10.00]
2001 BMW X5  [10.00]
Yeah.. AA FMIC but still stock DP, so still 5th? Ambient temps should be ok as still cool here in the PacNW, plus 10am dyno time. Their fans look pretty good and definitely run with hood up.

Great info on RPM, thank you.
__________________
Check out my BMW DIY Channel on YouTube! E, F and G series projects from Active Autowerke, Bimmertech, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy **
'Nimona' G87 M2 Build Thread
'Lillith' F87 M2 Competition Build Thread
Appreciate 1
FSociety3810.00
      03-29-2018, 12:22 PM   #25
FSociety
IG @bmwF9xG80
FSociety's Avatar
3810
Rep
7,594
Posts

Drives: G80 M3, X4M, G07 X7m50
Join Date: Apr 2012
Location: NYC to NJ to Orlando FL

iTrader: (3)

Garage List
2023 BMW G80 M3  [0.00]
2020 BMW X4MC  [0.00]
16' BMW X4 M40i  [10.00]
06 Cadillac STS  [0.00]
Quote:
Originally Posted by raichean View Post
Yeah.. AA FMIC but still stock DP, so still 5th? Ambient temps should be ok as still cool here in the PacNW, plus 10am dyno time. Their fans look pretty good and definitely run with hood up.

Great info on RPM, thank you.
USB stick to transfer your Dyno runs / dyno files
If Dynojet, get the winpep DRF file is called
__________________
60-130mph 6.5s X4M #HCP
60-130mph 5.0s G80 M3 #OrlandoAutowerks Sauce

IG: @bmwF9XG80

Appreciate 0
      03-29-2018, 12:32 PM   #26
BMW DIY Guy
Colonel
BMW DIY Guy's Avatar
United_States
3002
Rep
2,989
Posts

Drives: 2019 M2 Competition
Join Date: Jan 2017
Location: Maple Valley WA

iTrader: (1)

Garage List
2024 BMW M2  [9.75]
2017 BMW X1  [10.00]
2001 BMW X5  [10.00]
Quote:
Originally Posted by FSociety View Post
USB stick to transfer your Dyno runs / dyno files
If Dynojet, get the winpep DRF file is called
Yeah.. they were kind enough to email me the files last time, and will make sure to do the same.

Here is what I just got from AA regarding the dyno run and speed limiter:

"We always run them in 4th, the speed limiter is set to 320mph (512kph)… I think you’ll be ok. Unless the dyno facility has a fan capable of simulating 100+mph winds, I wouldn’t run it in 5th."
__________________
Check out my BMW DIY Channel on YouTube! E, F and G series projects from Active Autowerke, Bimmertech, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy **
'Nimona' G87 M2 Build Thread
'Lillith' F87 M2 Competition Build Thread
Appreciate 2
FSociety3810.00
ceedawg466.00
      03-29-2018, 12:42 PM   #27
FSociety
IG @bmwF9xG80
FSociety's Avatar
3810
Rep
7,594
Posts

Drives: G80 M3, X4M, G07 X7m50
Join Date: Apr 2012
Location: NYC to NJ to Orlando FL

iTrader: (3)

Garage List
2023 BMW G80 M3  [0.00]
2020 BMW X4MC  [0.00]
16' BMW X4 M40i  [10.00]
06 Cadillac STS  [0.00]
Quote:
Originally Posted by raichean View Post
Yeah.. they were kind enough to email me the files last time, and will make sure to do the same.

Here is what I just got from AA regarding the dyno run and speed limiter:

"We always run them in 4th, the speed limiter is set to 320mph (512kph)… I think you’ll be ok. Unless the dyno facility has a fan capable of simulating 100+mph winds, I wouldn’t run it in 5th."
I would take their advice
__________________
60-130mph 6.5s X4M #HCP
60-130mph 5.0s G80 M3 #OrlandoAutowerks Sauce

IG: @bmwF9XG80

Appreciate 2
ceedawg466.00
      03-29-2018, 12:59 PM   #28
ceedawg
Major
ceedawg's Avatar
466
Rep
1,348
Posts

Drives: 2k15 335i xdrive MSport 6spd
Join Date: Dec 2017
Location: Big City

iTrader: (0)

Quote:
Originally Posted by raichean View Post
Yeah.. they were kind enough to email me the files last time, and will make sure to do the same.

Here is what I just got from AA regarding the dyno run and speed limiter:

"We always run them in 4th, the speed limiter is set to 320mph (512kph)… I think you’ll be ok. Unless the dyno facility has a fan capable of simulating 100+mph winds, I wouldn’t run it in 5th."
Are you guys also at sea level? Make sure they plot AFR/Lamda and psi also!!!!!
__________________
2k15 335i Msport xdrive 6spd
Wagner Comp2 FMIC,FTP CP,stock exhaust. Fabspeed Sport catted DP, KW V2 coil overs,FBO BM3 Stg 2
Appreciate 0
      03-29-2018, 01:04 PM   #29
BMW DIY Guy
Colonel
BMW DIY Guy's Avatar
United_States
3002
Rep
2,989
Posts

Drives: 2019 M2 Competition
Join Date: Jan 2017
Location: Maple Valley WA

iTrader: (1)

Garage List
2024 BMW M2  [9.75]
2017 BMW X1  [10.00]
2001 BMW X5  [10.00]
Quote:
Originally Posted by ceedawg View Post
Are you guys also at sea level? Make sure they plot AFR/Lamda and psi also!!!!!
I am not quite sea level, but I am sure less than 250 feet, on where I will be.

Current log set is:

AFR commanded
AFR measured
Ambient Air temp
Engine load absolute
Engine RPM
Fuel Rail Pressure
Fuel trim bank 1 short term
Fuel trim bank 2 short term
IAT
MAF rate
Speed (obd)
Timing Advance
Turbo boost and vacuum gauge
__________________
Check out my BMW DIY Channel on YouTube! E, F and G series projects from Active Autowerke, Bimmertech, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy **
'Nimona' G87 M2 Build Thread
'Lillith' F87 M2 Competition Build Thread
Appreciate 0
      03-29-2018, 01:10 PM   #30
ceedawg
Major
ceedawg's Avatar
466
Rep
1,348
Posts

Drives: 2k15 335i xdrive MSport 6spd
Join Date: Dec 2017
Location: Big City

iTrader: (0)

Quote:
Originally Posted by raichean View Post
I am not quite sea level, but I am sure less than 250 feet, on where I will be.

Current log set is:

AFR commanded
AFR measured
Ambient Air temp
Engine load absolute
Engine RPM
Fuel Rail Pressure
Fuel trim bank 1 short term
Fuel trim bank 2 short term
IAT
MAF rate
Speed (obd)
Timing Advance
Turbo boost and vacuum gauge
I would imagine that they will be logging too so that's cool what you have there as well.
What is that you are using to log?
__________________
2k15 335i Msport xdrive 6spd
Wagner Comp2 FMIC,FTP CP,stock exhaust. Fabspeed Sport catted DP, KW V2 coil overs,FBO BM3 Stg 2
Appreciate 0
      03-29-2018, 01:17 PM   #31
BMW DIY Guy
Colonel
BMW DIY Guy's Avatar
United_States
3002
Rep
2,989
Posts

Drives: 2019 M2 Competition
Join Date: Jan 2017
Location: Maple Valley WA

iTrader: (1)

Garage List
2024 BMW M2  [9.75]
2017 BMW X1  [10.00]
2001 BMW X5  [10.00]
I am running Torque Pro via the OBD
__________________
Check out my BMW DIY Channel on YouTube! E, F and G series projects from Active Autowerke, Bimmertech, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy **
'Nimona' G87 M2 Build Thread
'Lillith' F87 M2 Competition Build Thread
Appreciate 0
      03-29-2018, 01:24 PM   #32
ceedawg
Major
ceedawg's Avatar
466
Rep
1,348
Posts

Drives: 2k15 335i xdrive MSport 6spd
Join Date: Dec 2017
Location: Big City

iTrader: (0)

Quote:
Originally Posted by raichean View Post
I am running Torque Pro via the OBD
Interesting! I don't have a JB4 but maybe for the time being I can use that. Is it a kit or an app?
__________________
2k15 335i Msport xdrive 6spd
Wagner Comp2 FMIC,FTP CP,stock exhaust. Fabspeed Sport catted DP, KW V2 coil overs,FBO BM3 Stg 2
Appreciate 0
      03-29-2018, 01:26 PM   #33
BMW DIY Guy
Colonel
BMW DIY Guy's Avatar
United_States
3002
Rep
2,989
Posts

Drives: 2019 M2 Competition
Join Date: Jan 2017
Location: Maple Valley WA

iTrader: (1)

Garage List
2024 BMW M2  [9.75]
2017 BMW X1  [10.00]
2001 BMW X5  [10.00]
The Torque Pro app is available from the Play store and I use it all the time to look up codes, reset stuff etc. Then I just have a simple Bluetooth OBD adapter.
__________________
Check out my BMW DIY Channel on YouTube! E, F and G series projects from Active Autowerke, Bimmertech, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy **
'Nimona' G87 M2 Build Thread
'Lillith' F87 M2 Competition Build Thread
Appreciate 0
      03-29-2018, 01:51 PM   #34
ceedawg
Major
ceedawg's Avatar
466
Rep
1,348
Posts

Drives: 2k15 335i xdrive MSport 6spd
Join Date: Dec 2017
Location: Big City

iTrader: (0)

Quote:
Originally Posted by raichean View Post
The Torque Pro app is available from the Play store and I use it all the time to look up codes, reset stuff etc. Then I just have a simple Bluetooth OBD adapter.
Please post a link for the adpt if you can ,much appreciated

Quote:
Originally Posted by raichean View Post
The Torque Pro app is available from the Play store and I use it all the time to look up codes, reset stuff etc. Then I just have a simple Bluetooth OBD adapter.
Still kinda waiting for a complete commentary on how the BEAST feels in general with the AA SW especially in comparison after using the former Active 8 piggy. Maybe that will come after your dyno
__________________
2k15 335i Msport xdrive 6spd
Wagner Comp2 FMIC,FTP CP,stock exhaust. Fabspeed Sport catted DP, KW V2 coil overs,FBO BM3 Stg 2
Appreciate 0
      03-29-2018, 02:20 PM   #35
BMW DIY Guy
Colonel
BMW DIY Guy's Avatar
United_States
3002
Rep
2,989
Posts

Drives: 2019 M2 Competition
Join Date: Jan 2017
Location: Maple Valley WA

iTrader: (1)

Garage List
2024 BMW M2  [9.75]
2017 BMW X1  [10.00]
2001 BMW X5  [10.00]
You can get the adapter from like 1,000 places, I got mine from Avin when I ordered the deck for my E46 a couple of years ago.

For the review, happy to describe what is the butt-dyno differences. The active 8 is absolutely a great product, and felt smoother than the JB4 though my sample time with that was shorter, and never got beyond map 1 or 5. A8 was a smooth ramp with a big surge around 2600 RPM that really was a kick in the pants as you crossed that line. With my other bolt ons, I was roughly 330rwp/330 torque with the A8.

The new ECU tune is a different monster and for understandable reasons. Setting aside the ability to change the sport gauges and the like, it is absolutely a more specific and I suspect more aggressive tune. The car feels MUCH stronger than before, and in what feels like a linear curve than a surge like before. If I am coming hard out of 2nd or 3rd, especially 2nd, I feel like I get some back end wiggle that I never had before stock or with the A8. With the M4 sport gauges code in place, I can easily put both needles around 370ish without any trouble, though we all know those gauges are a SWAG at best. The real test will be full dyno and logs this weekend, plus I will provide all of that back to AA for review, and any further possible modifications based on that data. In addition, I will have the AA DP as soon as they ship me one, and will dyno yet again.

I have ZERO desire to push my motor, turbo or components to the breaking point, but its clear there is a lot of ceiling room on these motors and I want to get closer to that.
__________________
Check out my BMW DIY Channel on YouTube! E, F and G series projects from Active Autowerke, Bimmertech, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy **
'Nimona' G87 M2 Build Thread
'Lillith' F87 M2 Competition Build Thread
Appreciate 2
ceedawg466.00
      03-29-2018, 02:42 PM   #36
XutvJet
Major General
5488
Rep
5,335
Posts

Drives: 2011 Cayman Base, 2016 M235
Join Date: Mar 2016
Location: Kansas City

iTrader: (-1)

You'll get higher numbers running in 5th (assuming you're not heat soaking), BUT it's a lot harder on the motor, especially in the lower rpms because you're creating a very high load situation going full throttle and 2,000rpms (i.e., low rpm, heavy boost). High load can create over-boosting at boost onset and worse, severe detonation. The 5th gear run will generate a more heat as well because......it's a much longer run. I would strongly suggest running in 4th. It's just better for the motor and you should still get very solid and usable data. If you want to know what the 5th gear numbers are, simply multiply by 1.5% and that will give you a general idea.

If it's available, run 93 octane. Put the biggest fan(s) you can in the front the IC and radiator.
__________________
The forest was shrinking, but the Trees kept voting for the Axe, for the Axe was clever and convinced the Trees that because his handle was made of wood, he was one of them.
Appreciate 2
FSociety3810.00
ceedawg466.00
      03-29-2018, 02:44 PM   #37
BMW DIY Guy
Colonel
BMW DIY Guy's Avatar
United_States
3002
Rep
2,989
Posts

Drives: 2019 M2 Competition
Join Date: Jan 2017
Location: Maple Valley WA

iTrader: (1)

Garage List
2024 BMW M2  [9.75]
2017 BMW X1  [10.00]
2001 BMW X5  [10.00]
Quote:
Originally Posted by XutvJet View Post
You'll get higher numbers running in 5th (assuming you're not heat soaking), BUT it's a lot harder on the motor, especially in the lower rpms because you're creating a very low load situation (i.e., low rpm, heavy boost). High load can create over-boosting at boost onset and worse, severe detonation. The 5th gear run will generate a more heat as well because......it's a much longer run. I would strongly suggest running in 4th. It's just better for the motor and you should still get very solid and usable data. If you want to know what the 5th gear numbers are, simply multiply by 1.5% and that will give you a general idea.

If it's available, run 93 octane. Put the biggest fan you can in the front the IC and radiator.
Thanks man, I appreciate all of the info.. I will make sure they have all possible fans on (they have a bunch) and sadly its 92 octane here in WA. At least its not 91 like CA.
__________________
Check out my BMW DIY Channel on YouTube! E, F and G series projects from Active Autowerke, Bimmertech, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy **
'Nimona' G87 M2 Build Thread
'Lillith' F87 M2 Competition Build Thread
Appreciate 0
      03-29-2018, 03:09 PM   #38
ceedawg
Major
ceedawg's Avatar
466
Rep
1,348
Posts

Drives: 2k15 335i xdrive MSport 6spd
Join Date: Dec 2017
Location: Big City

iTrader: (0)

Quote:
Originally Posted by XutvJet View Post
You'll get higher numbers running in 5th (assuming you're not heat soaking), BUT it's a lot harder on the motor, especially in the lower rpms because you're creating a very high load situation going full throttle and 2,000rpms (i.e., low rpm, heavy boost). High load can create over-boosting at boost onset and worse, severe detonation. The 5th gear run will generate a more heat as well because......it's a much longer run. I would strongly suggest running in 4th. It's just better for the motor and you should still get very solid and usable data. If you want to know what the 5th gear numbers are, simply multiply by 1.5% and that will give you a general idea.

If it's available, run 93 octane. Put the biggest fan(s) you can in the front the IC and radiator.
Great advice! Think FSociety mentioned that too.
__________________
2k15 335i Msport xdrive 6spd
Wagner Comp2 FMIC,FTP CP,stock exhaust. Fabspeed Sport catted DP, KW V2 coil overs,FBO BM3 Stg 2

Last edited by ceedawg; 03-29-2018 at 03:15 PM..
Appreciate 0
      03-29-2018, 03:10 PM   #39
jh_f30
Lieutenant Colonel
jh_f30's Avatar
1306
Rep
1,827
Posts

Drives: 2013 335i Sportline Auto RWD
Join Date: Aug 2017
Location: Bay Area, CA

iTrader: (2)

Quote:
Originally Posted by ceedawg View Post
Quote:
Originally Posted by raichean View Post
The Torque Pro app is available from the Play store and I use it all the time to look up codes, reset stuff etc. Then I just have a simple Bluetooth OBD adapter.
Please post a link for the adpt if you can ,much appreciated

Quote:
Originally Posted by raichean View Post
The Torque Pro app is available from the Play store and I use it all the time to look up codes, reset stuff etc. Then I just have a simple Bluetooth OBD adapter.
Still kinda waiting for a complete commentary on how the BEAST feels in general with the AA SW especially in comparison after using the former Active 8 piggy. Maybe that will come after your dyno
Just a heads up in case it applies, the Torque app is Android only. I've been running OBD Fusion on iPhone for some data logs. Not sure if it reads all the same PIDs, but without a JB4 or other tune-specific logging capabilities, it's better than nothing. Also, idk if it's just me, but I have both a Bluetooth BLE and a WiFi adapter and they seem to read slightly different sets of PIDs through the same app (OBD Fusion).
__________________
2013 F30 335i RWD ZF Melbourne Red
~Remus Sport Axleback~VRSF Chargepipe~VRSF Catless Downpipe~GPlus FMIC~HR Sport Springs~Active Autowerke OBD Flash Tune Stage 2~
Appreciate 1
ceedawg466.00
      03-29-2018, 03:12 PM   #40
ceedawg
Major
ceedawg's Avatar
466
Rep
1,348
Posts

Drives: 2k15 335i xdrive MSport 6spd
Join Date: Dec 2017
Location: Big City

iTrader: (0)

Quote:
Originally Posted by raichean View Post
You can get the adapter from like 1,000 places, I got mine from Avin when I ordered the deck for my E46 a couple of years ago.

For the review, happy to describe what is the butt-dyno differences. The active 8 is absolutely a great product, and felt smoother than the JB4 though my sample time with that was shorter, and never got beyond map 1 or 5. A8 was a smooth ramp with a big surge around 2600 RPM that really was a kick in the pants as you crossed that line. With my other bolt ons, I was roughly 330rwp/330 torque with the A8.

The new ECU tune is a different monster and for understandable reasons. Setting aside the ability to change the sport gauges and the like, it is absolutely a more specific and I suspect more aggressive tune. The car feels MUCH stronger than before, and in what feels like a linear curve than a surge like before. If I am coming hard out of 2nd or 3rd, especially 2nd, I feel like I get some back end wiggle that I never had before stock or with the A8. With the M4 sport gauges code in place, I can easily put both needles around 370ish without any trouble, though we all know those gauges are a SWAG at best. The real test will be full dyno and logs this weekend, plus I will provide all of that back to AA for review, and any further possible modifications based on that data. In addition, I will have the AA DP as soon as they ship me one, and will dyno yet again.

I have ZERO desire to push my motor, turbo or components to the breaking point, but its clear there is a lot of ceiling room on these motors and I want to get closer to that.
Certainly looking forward! Great review and yes you want to run as safe a situation as possible not to hurt the motor.
__________________
2k15 335i Msport xdrive 6spd
Wagner Comp2 FMIC,FTP CP,stock exhaust. Fabspeed Sport catted DP, KW V2 coil overs,FBO BM3 Stg 2
Appreciate 1
      03-29-2018, 05:13 PM   #41
matty088
Major
362
Rep
1,206
Posts

Drives: 335i
Join Date: Jan 2012
Location: Ct

iTrader: (1)

Shall we make a pool on what his number is? I say 325 if xdrive and 338 if not
Appreciate 0
      03-29-2018, 05:36 PM   #42
jh_f30
Lieutenant Colonel
jh_f30's Avatar
1306
Rep
1,827
Posts

Drives: 2013 335i Sportline Auto RWD
Join Date: Aug 2017
Location: Bay Area, CA

iTrader: (2)

Quote:
Originally Posted by matty088 View Post
Shall we make a pool on what his number is? I say 325 if xdrive and 338 if not
These would be whp figures right? So just to see if my math is right, if we assume 15% drivetrain loss (as Dinan calculates), 338whp would translate to around 398bhp?

Algebra was a long time ago, but I calculated:

338whp = bhp(.85) -> 85% being bhp minus 15%
338/.85 = bhp -> divide both sides by .85
397.65 = bhp right? or am I off my rocker?
__________________
2013 F30 335i RWD ZF Melbourne Red
~Remus Sport Axleback~VRSF Chargepipe~VRSF Catless Downpipe~GPlus FMIC~HR Sport Springs~Active Autowerke OBD Flash Tune Stage 2~
Appreciate 0
      03-29-2018, 05:43 PM   #43
the dope steez
Captain
Canada
401
Rep
808
Posts

Drives: F30 335i M-Sport
Join Date: Jul 2016
Location: Shredmonton, Illberta

iTrader: (0)

Quote:
Originally Posted by matty088 View Post
Shall we make a pool on what his number is? I say 325 if xdrive and 338 if not
You think he's losing power by going to a flash?

I'll throw a dart - 365 whp and 390 wtq
Appreciate 0
      03-29-2018, 05:56 PM   #44
Mouse
Second Lieutenant
95
Rep
279
Posts

Drives: 2013F30 335i
Join Date: Aug 2016
Location: Cypress, TX

iTrader: (0)

355/410
__________________
13' F30 335i - BMS Intake -- VRSF DP -- VRSF CP -- VRSF 5" Stepped Intercooler -- Corsa Touring Catback -- JB4 -- H&R Springs -- Miro Flow Formed F25's
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:27 PM.




f30post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST