[BeMyWheels]

Hi guys, first can I say this forum is amazing!
I have got E-SYS, updated PSDZDATA file (lite), and currently trying to get ISTA -D

The car is a facelift M-Sport, with Full LED headlights, and I am replacing with Full LED shadow edition headlights

The new lights are completely dead, from what I can read on the forums, they need reprogramming, (throwing lots of errors too).

The forums I can find now, all have dead URL links, any help guys?

I have used ESys cheat sheets to code with, and need to also learn how the cheat codes work included with the launcher

Thought would be cool to have a post without any links to download software just tutorials?

Did take pictures of light modules if that helps?

Much appreciated

[BeMyWheels]

Hi guys

I have now gone into Ista
Re learned height sensor
Re learned indicators
Code FEM - from the test plan

And in e-sys just clicked code on the FEM module

The car no longer shows all errors it just says headlight range control

Neither light is working

I got pictures and videos coming

[BeMyWheels]

Pictures of my errors before i cleared anything

[BeMyWheels]

following the clear, i did a ride height calibration under body, and then code new indicators, then followed this test plan

youtube video of me going through the steps

Car shows headlight vertical control after

I CAN GIVE TOKENS PLEASE PM/DM

[atzebmw]

Mark the fle module in the SVT table, assign a CAFD and code it.
Do the same for the second fle module.

[BeMyWheels]

Originally Posted by atzebmw

Mark the fle module in the SVT table, assign a CAFD and code it.
Do the same for the second fle module.

Hi thanks for the reply, I just went to check and i can not see CAFD in either of those modules image attatched

[atzebmw]

Originally Posted by BeMyWheels

Hi thanks for the reply, I just went to check and i can not see CAFD in either of those modules image attatched

Yes, because the modules are "new" for your car and you have to assign the CAFD first.
So mark the FLE, then on the right side "detect caf for swe" and a window opens. Choose the bottom CAFD or the CAFD with the highest numbers and hit OK.
Then hit the button "Code".
Do the same for the second FLE.

[BeMyWheels]

Originally Posted by atzebmw

Yes, because the modules are "new" for your car and you have to assign the CAFD first.
So mark the FLE, then on the right side "detect caf for swe" and a window opens. Choose the bottom CAFD or the CAFD with the highest numbers and hit OK.
Then hit the button "Code".
Do the same for the second FLE.

OH MY GOD,
This has just made my day

Thank you for giving some time to help a complete stranger

Did exactly as you showed and selected the last CAFD option?

And no errors and lights work properly

Think I may need to align them but looks good!

Thanks again!

(I CAN GIVE TOKEN PM ME)

[MasterShaw]

atzebmw You are a legend I couldn’t get my LED headlights coded in and this is what I was missing.

Thanks man ��

[atzebmw]

Originally Posted by MasterShaw

atzebmw You are a legend I couldn’t get my LED headlights coded in and this is what I was missing.

Thanks man ��

Glad I could help

[fabianx]

Originally Posted by atzebmw

Glad I could help

Hi,
i want to make a retofit on my car 3 GT F34 12/2013, from halogen to led headlights (not adaptive), and i don't want to install the level sensors.
regarding the coding of led headlight (not adaptive):
1. after i will assign with esys the CAFD will be need other codings?
2. i don't want to install the level sensors, so i could get some errors, and i read that will be necessary to add an option (i think is 5A2 led headlights, not adaptive).
3. how to add option 5A2 in FEM and REM.
4. My car is made in 12/2013, the i-drive software will need update?
thank you

thank you in advance.

[AMcKinney94]

Can anyone please send me a link to download Ista so I can program my new LED headlight on my f30. I can’t find a legit download anywhere.

[TheNine90]

Its better to use esys to program it. PM me i can send you a copy of esys

[dwightklewis]

atzebmw i have just followed your instructions and happy to inform that it worked a treat for one side. The only issue i have is that i am missing FLE 44. Any ideas on this? can i copy FLE 43 and rename to 44?

[TheNine90]

Check connector. It usually loose connection of the module isn't responding. You can swap the module and check if the module is the issue or the connection

[PedroRios]

Does anyone know how to disable the angel eyes completely? Even when you have a position light or headlight on? Via bimmercood

[PedroRios]

How to remove the light error of the angel eyes burned from the panel? I removed the lights and would like to stay without them and without the error in the panel, via bimmercode...