11-04-2015, 01:04 AM | #1 |
New Member
5
Rep 13
Posts |
6NS Hardware retrofit. Need help please.
Hello,
I've coded 6NS on my 2015 F36. Everything is working fine (thanks to Shawn). I'm now, trying to add phone cradle and second microphone and speaker for passenger... I've removed rear ventilation grill and where I'm supposed to find the cables to connect the phone cradle...nothing :/ I removed every pieces from rear ventil to dashboard and no cables to connect cradle: Or, it should be like that: Same for the passenger microphone. No cable found: Or it should be like at driver place : Anyone have already done those modifications and can help me, please? More precisions on my car: 2015 420d F36 Navigation Business (Entrynav) with Hifi. Connected drive, Bluetooth, USB. I think I have no combox as now it's integrated in headunit. Thank's in advance for your help |
11-09-2015, 05:54 AM | #3 |
Lieutenant Colonel
541
Rep 1,894
Posts |
I wouldn't bother with the phone cradle, phone reception is fine without it going through the car.
As for the extra microphone, you'll need to cut a hole and buy the mic + 3 pin connector then attach it all using some wire to the quadlok loom to either MIC 1 or 2....depends on which one is not connected. |
Post Reply |
Bookmarks |
Tags |
6ns, cradle, diy, phone, retrofit |
|
|