[leejak]

Is it possible to code for launch control using bimmercode in expert mode?

[Steakpizza]

Originally Posted by leejak

Is it possible to code for launch control using bimmercode in expert mode?

For me I was able to.

Originally Posted by MONSTAR

Sport+ has been available, I did it back in January. You just need to switch to expert mode and change all of the entries that you would through esys (the longer process, not the one mentioned by BunkerJ in this thread [VO code])

EDIT: If you have the base'st of base models like myself, you will be able to enable the sport display gauges, but they wont work

EDIT2: Its been so long since I've done it....I think this is the list:

Kombi/ 300C /ECO_FDSF /Function /

-> FDS_MENUE_TEXT_1=> menue_3
-> FDS_MENUE_SIGNAL_1=> menue_3
-> FDS_MENUE_TEXT_2=> menue_3
-> FDS_MENUE_SIGNAL_2=> menue_3
-> FDS_MENUE_TEXT_3=> menue_3
-> FDS_MENUE_SIGNAL_3=> menue_3
-> FDS_MENUE_TEXT_4=> menue_3
-> FDS_MENUE_SIGNAL_4=> menue_3

ICM/3000 Daten -> IcmKod_B_Sportlenkung -> verbaut
ICM/3000 Daten -> IcmKod_B_S2TBA -> verbaut

EGS/3000 Applikation -> Sportschalter_alt -> aktiv
EGS/3000 Applikation -> Sportschalter -> aktiv

The EGS 3000 at the bottom is SAT mode. It's the exact same as the SAT option on Bimmercode, so make sure it's on. Do everything as it is here. These changes activate SAT and Sports +, which are needed for LC.

[Mid_Night_F20]

Originally Posted by steve@codemybimmer

EGS 3000 SPORTSHALTER >aktiv
EGS 3000 LC >aktiv

Note that your car has to be on at least 50.4 in order for this to work.

The other way to do it is to VO code EGS with a build date of 07/13 but I don't know if anyone has tried that yet.

2012 F20 1 series
I have got the above activated via bimmercode and I followed the LC procedure all over youtube for the F series and it wont work.

Actually I coded something as simple as 3 blinks for door lock/unlock and it didn't work at all.

Is there anything I can do? Is my car too old?

There are no updates for my car on www.bmw.com/updates

thanks in advance !

[marshallo]

Hi, I’ve coded LC as mentioned above. The thing is that the flag with info „Launch control active” appears, but wheels try to spin anyway like it doesn’t work.