01-21-2021, 09:06 AM | #1 |
Private First Class
45
Rep 121
Posts |
Enable Front camera via center contoll button Retrofit.
Hi all,
So i installed the front and back camera on my f34, works as expected, put in D and front comera comes on for about 8-10. Wanted to fit one of these So i have as i understand a trip wire coming from front camera? This is the unit i used: Av cable connect to Front AV plug and red 12v DC wire to a red wire to provide power ( both front and back camera gets power from 1 red wire coming from that box) my guess all switching is done from that box, eg it picks up if im in D or R and then switches between AV inputs and i guess again the 12v power wire coming from that box constantly powers the front and back camera as soon as ignition is on? So only way for me me to engage front camera after i drove off is to stop put in to N the in to D, this will engage front camera for 10 seconds. Is there any way i can engage front camera via control button marken in orange circle above? So when i need to park close to the wall where i live i have to stop N then in D again instead i can just trigger it via button. Anyone done that before? Thanks all for any help given.
__________________
Mess with the Best - Die like the Rest
|
01-21-2021, 01:41 PM | #4 |
Captain
336
Rep 963
Posts |
link? i just got a carplay MMI that has this option, but also interested in adding a front camera
__________________
2018 Azurite Black F80 M3 ZCP
2019 Phytonic Blue G05 X5 2013 Glacier Silver F30 335i (sold) |
Appreciate
0
|
01-22-2021, 11:33 AM | #5 | |
Private First Class
45
Rep 121
Posts |
Quote:
https://a.aliexpress.com/_BTu8ed £17.88 46%OFF | BigBigRoad CCD Car Front View Logo Camera For BMW 3 Seires F30 F31 F34 GT 2016 2017 Waterproof https://a.aliexpress.com/_BPIxxx |
|
Appreciate
1
aps335.50 |
01-23-2021, 02:28 PM | #7 |
Private
23
Rep 75
Posts |
Quote:
https://www.ebay.co.uk/itm/1PC-Car-F...IAAOSwRYZfwhGT However this is connected to a 10.25 Android unit (idrive screen replacement), after reversing cam automatically coming on when reverse is selected it then shows the front cam for 10 secs, but if you want to access the front screen anytime, then press the parking sensor button, press the little controller button via a lead going into the unit and voila, the front cam is on until you press the parking sensor button off. So basically you can access the front cam anytime you want. |
Appreciate
0
|
01-25-2021, 02:54 AM | #9 | |
Private First Class
45
Rep 121
Posts |
Quote:
Reason i dont have is i do not have front proximity sensors. Hence each time im parking close to something i have to stop, put car in N then in to D to activate front camera for 10 sec. To stop all that i thought to fit that console as shown above with parking sensor button so i can just press the button and front cam comes on for 10 sec. Only thing that pisses me off is when i drive and stop at traffic lights i always use to put car in Neutral, but each tome i put in Drive front cam comes on (does that bother you?) so for now when i stop at traffic lights i keep foot on breaks and keep car in Drive.
__________________
Mess with the Best - Die like the Rest
|
|
Appreciate
0
|
01-25-2021, 02:59 AM | #10 |
Private First Class
45
Rep 121
Posts |
Yes its plug and play as installed in to my OEM NBT, no tapping in to any wiring. Ground wire DO NOT connect or tap in to reverse light as this will give you bad picture with loads of noise in it, i just taped wire on to bare metal anywhere on your trunk when you remove trim.
__________________
Mess with the Best - Die like the Rest
|
Appreciate
0
|
01-25-2021, 03:01 AM | #11 | |
Schmollbraten
12512
Rep 1,985
Posts |
Quote:
__________________
Citizen of ///M - Town, where too much is just right Some say, that my scrotum has its own small gravity field and when Im slowing down that brake lights come on at my buttox |
|
Appreciate
0
|
01-25-2021, 04:28 AM | #12 | |
Private First Class
45
Rep 121
Posts |
Quote:
You remove your loom and plug the one that comes with the kit in to your NBT, then plug your original loom in to the kit (it becomes kind of extension) Remember to unlip optical cable from original and plug it in to supplied loom. As i didnt know how to take the boot trim off it took me a long time i think to fit all 6.5 hours, If i to do it again probably can be done in 1 hour. Front camera clips on to your front grill (measure with caliper or ruler what space you have depending on grill as they come in different sizes before getting front cam) , but i had to cut clips off camera on mine to lower the camera down manually so it would capture bit of my front bumper and use silicone behind it to secure in in angle and place i wanted (silicone comes off easily without damaging grill and/or leaving residue but hard enough to hold camera in place) You can use aquarium silicone or C2 (sold here in UK) Reason i wanted to see a bit of front bumper is if camera mounted in bracket default position you have no perspective of how close obstacle to your bumper for example high curb. This way i can park easily within half inch of the obstacle. Ill see if i can upload some video when i get home.
__________________
Mess with the Best - Die like the Rest
|
|
Appreciate
1
Dang3r12512.00 |
01-25-2021, 08:02 AM | #13 |
Schmollbraten
12512
Rep 1,985
Posts |
I owned a RS5 before and got there front and rear cam plus pre sense and during 2 years I'd never touched any unwanted obstacles. Plus, the Gx-Series will bring this now at BMW to life, the simultan sight top + front or rear depends on gear.
At my M4 I have at front parking the PDC manually to select to avoid acustically to bump into some things. My thoughts are as yours, the front cam would reduce the risk to come too close to other cars or obstacles in front of your ride.
__________________
Citizen of ///M - Town, where too much is just right Some say, that my scrotum has its own small gravity field and when Im slowing down that brake lights come on at my buttox |
Appreciate
0
|
01-25-2021, 08:46 AM | #14 | |
Private First Class
45
Rep 121
Posts |
Quote:
__________________
Mess with the Best - Die like the Rest
|
|
Appreciate
0
|
01-25-2021, 09:13 AM | #15 | |
Brigadier General
1646
Rep 4,877
Posts |
Quote:
My car came with surround view (so 2 bumper cameras, two mirror cameras and one rear camera). Just wondering if I have a spare connector in the loom, or if I need to unplug one to get another. Thanks! |
|
Appreciate
0
|
01-25-2021, 02:04 PM | #16 | |
Private First Class
45
Rep 121
Posts |
Quote:
And no i dont have any cameras on my car, this retrofit only for front and rear camera. Front it fitted in to the kidney glill. If you have 360 i wouldnt unplug any of them. Why you want to unplug? What is the mail reason? |
|
Appreciate
0
|
01-25-2021, 02:05 PM | #17 |
Private First Class
45
Rep 121
Posts |
Oh and here is the video of how back and front non OEM works:
For back i have screen filled with camera fotage and proximity. For front proximity disappears as i dont have front sensors hence the RHS of screen you can see some content from main scree. Next will be to firt fron sensors for me i guess. But for now not bothered. |
Appreciate
0
|
01-25-2021, 07:37 PM | #18 | |
Brigadier General
1646
Rep 4,877
Posts |
Quote:
|
|
Appreciate
0
|
01-25-2021, 11:51 PM | #21 | |
Private First Class
45
Rep 121
Posts |
Quote:
Its fairly simple, the loom you get is like extension cable, except that you get 6 cables coming out of it. Well 3 cables and 3 connectors plus a connector that plugs in to decoder. 3 RCA - Front Input, Rear Input and DVR Input 3 Wires -Reverse Power (cable you tap in to to supply power to front and back camera), -DVR ACC (if you want to plug in another camera and use as dvr recorder when ignition starts as the unit Decoder box has micro SD slot for storing recording footage, i find it slightly useless as the unit will be fitted behind the NBT or what ever you have as they come for CIC and EVO too, eg to fit 4 pin LVDS, 6 pin LVDS and getting to SD to retrieve footage each time you need is bit silly having to take off your console).Or i guess you can always get Micro SD flex extension cable -And lastly 360 camera power supply ( i guess it can be done to retrofit 360 as seen here in forums but not something i'm ready to do, thinking im half way there only need to fit 2 mirror cameras but then i need to code. For now the way its done coding not needed.) Plug and play Last edited by SerTan; 01-26-2021 at 01:45 AM.. |
|
01-26-2021, 06:05 PM | #22 | |
Private
23
Rep 75
Posts |
Quote:
To have a front and rear cam on idrive stock, you would need BMW OEM hardware, or aftermarket hardware designed to run with idrive stock. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|