[rezadue]

Hi,

I have a 2013 F30 which was recently reflashed and updated by BMW to clear a random rebooting issue. In the process of a full reflash from BMW I lost all my coding, so I have to redo all the codes.

I was able to code 6NK over my existing 6NS, and have also done some CAFD coding for some modules. But some of the modules ae not accesible by me. I am getting the following error:

Transaktions-Report: Aktion: Codierdaten lesen


CAFD_00000794_016_050_021 Fehler:
CPS read from ECU "ECUId:FEM_BODY_0x40" failed! [C070]
openECUConnection for link FEM_BODY_40_ETHERNET failed with error MCDError Severity: 2051, Error Code: 49184, Description: Object with name not found, Vendor Code: 3, Vendor Description: provided name FEM_BODY_40_ETHERNET doesn't map to an item [1694]


What do I do?

Thanks

[HFW003]

I would suggest you need to update Esys and Psdz data.

[rezadue]

Thanks for the suggestion. Here is what I have:

E-Sys: 3.27.1
E-Sys Launcher premium: 2.5.3.108
PSDZ version: 5.01.02.2015-08


I-STEP (Shipment): F20-16-03-500
I-STEP (target): F20-15-11-505

Is there is a compatibility issue, and am I using old software/data versions?

Thanks

[HFW003]

Looks like your Esys is fine, not sure about the data though.

I would send shawnsheridan a PM and I'm positive he will come straight back to you with a resolution.

[shawnsheridan]

Originally Posted by HFW003

Looks like your Esys is fine, not sure about the data though.

I would send shawnsheridan a PM and I'm positive he will come straight back to you with a resolution.

"Object with name not found" is a ECU mapping issue, meaning wrong E-Sys Launcher Car Series or E-Sys Connection Target is being used.

[rezadue]

Thanks Shawn,

I chose F30 in e-sys launcher and F30 in e-sys. Was this not correct?

Originally Posted by shawnsheridan

"Object with name not found" is a ECU mapping issue, meaning wrong E-Sys Launcher Car Series or E-Sys Connection Target is being used.

[shawnsheridan]

Originally Posted by rezadue

Thanks Shawn,

I chose F30 in e-sys launcher and F30 in e-sys. Was this not correct?

There is no F30 in E-Sys, there is F20. You need to go back and double check all your settings. Object not Found means somewhere it is expecting car without FEM module, such as an F10.

[rezadue]

Sorry,

What I meant to say was that I chose F030 in the e-sys launcher and F020 in E-sys itself.

It maybe that the first time I launched e-sys I chose F010, but the last time I did, I chose F020....

[myszano1]

I got same issue, coding f30 so I chose f020 in esys, and couldnt get into FEM_BODY , have same error?

[shawnsheridan]

Originally Posted by rezadue

Sorry,

What I meant to say was that I chose F030 in the e-sys launcher and F020 in E-sys itself.

It maybe that the first time I launched e-sys I chose F010, but the last time I did, I chose F020....

If you use E-Sys Launcher to Open E-Sys, and all connection parameters are correct for both Launcher and E-Sys, you should not have "Object not Found" error. If you do, I will need to connect with TeamViewer and look at what is happening.

Originally Posted by myszano1

I got same issue, coding f30 so I chose f020 in esys, and couldnt get into FEM_BODY , have same error?

From your other post, you had Missing CAFD error and new PSdZData should solve that.

[Tichx]

When you are establishing the connection, make sure you have the right Chassis selected and don't select the _DIRECT option. I didn't have a Chassis selected and that caused the issue in my situation. Marking as solved.

Link:
https://www.bimmerfest.com/forums/sh...d.php?t=833461

[HFW003]

[QUOTE=Tichx;24830717]

Well done!