11-21-2018, 08:10 AM | #1 |
Private First Class
137
Rep 139
Posts |
Question -- ER FMIC Install - f30 n55
Does anyone know the bolt size for mounting the upper bracket to the pre-threaded hole on the cross member? These two bolts were not included in my shipment from ER.
__________________
2013 Active Hybrid 3 | M Sport | Alpine White | Coral Red | BM3 Stage 2 | ER FMIC | FabSpeed Catted DP | ER CP |
2016 F150 2021 RnineT 2022 K1600B Last edited by dougt.ah3; 11-21-2018 at 08:22 AM.. |
11-21-2018, 08:44 AM | #2 |
Major
430
Rep 1,115
Posts |
Its the same size as the ones that tread into the top of the intercooler. I believe its 8mm metric threads, I had the same issue and took those allen key bolts to home depot to source the ones for the cross member. Took a bit to get the right threads matched up.
|
Appreciate
0
|
11-21-2018, 09:37 AM | #3 | |
Private First Class
137
Rep 139
Posts |
Quote:
For future reference the bolt size is M8-1.25 x 16mm
__________________
2013 Active Hybrid 3 | M Sport | Alpine White | Coral Red | BM3 Stage 2 | ER FMIC | FabSpeed Catted DP | ER CP |
2016 F150 2021 RnineT 2022 K1600B Last edited by dougt.ah3; 11-21-2018 at 08:23 PM.. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|