03-19-2018, 07:46 PM | #23 |
Lieutenant Colonel
478
Rep 1,568
Posts |
No, you still will need to remove the strut bar. There are several other components along that side of the engine that preclude you having straight access to the rear plug (6). I was able to get 5 out without going down to the 1/4" drive and using a 1/4" to 3/8" adapter that I needed on 6. If using a 3/8" drive, using a 3/8" Universal adapter between the extension and the spark-plug socket makes it easier all around
|
Appreciate
0
|
03-19-2018, 08:02 PM | #24 | |
Lieutenant
272
Rep 529
Posts |
Quote:
__________________
2013 F30 335i xDrive M-Sport 6MT (FBO/BM3 custom tune by HCP, 91 oct, 550i clutch, xDelete)
|
|
Appreciate
0
|
03-19-2018, 09:20 PM | #25 |
not good, but bad
333
Rep 361
Posts |
It must be because I can't see how you would do it on a 335 without removing the brace
__________________
They are spelled BRAKES not breaks!!!! Oh FFS, not another spark plug thread!
BreadsBMW on Youtube |
Appreciate
2
akgambino271.50 the dope steez403.00 |
Post Reply |
Bookmarks |
Tags |
diy 3 series f30, maintainence, spark plug change |
|
|