04-07-2023, 05:54 AM | #45 |
Enlisted Member
2
Rep 31
Posts |
|
Appreciate
0
|
05-14-2023, 04:14 PM | #47 |
Registered
0
Rep 3
Posts |
Just did this on my 2015 328i, it worked.
I followed atzebmw`s instructions and coded VO from 8KL to 8KP. At first, I coded as he said, change VO and code KOMBI, but that did not work for me, I tried CBS reset but the 16000km/12 month was still there. After that I saw Discordia`s message in which he coded also the DME and HU-NBT and FEM_BODY, the last 2 are kind of optional. After I coded the DME the interval went down to 8000km/12 months. Thank you! |
Appreciate
0
|
10-22-2023, 05:07 AM | #48 |
New Member
4
Rep 10
Posts |
Oil change interval coding
|
Appreciate
0
|
10-29-2023, 12:56 AM | #49 |
Enlisted Member
5
Rep 38
Posts |
|
Appreciate
0
|
10-29-2023, 12:54 PM | #52 |
Banned
575
Rep 2,047
Posts |
One of these values change depending on the option choosen. Sometime it remains same.
CBS_WEG_FAKTOR_FZG_CHECK_DEPEND Comment=A multiplier for motor oil for the path component of the fzg_check. This factor indicates how often the forecast is added to the remaining path. CBS_ZEIT_FAKTOR_FZG_CHECK_DEPEND Comment=A multiplier for motor oil for the time component of the fzg_check. This factor indicates how often the forecast is added to the remaining path. |
Appreciate
0
|
03-24-2024, 05:57 AM | #55 |
Registered
2
Rep 2
Posts |
I just made it working as needed. Below meaning of the wert. For oil interval change needed only to change one parameter.
DME 3701 OHNE_ZEITLIMIT OWI_NEU wert_1 78,64 - 30 tkm 24 m wert_2 64,64 - 25 tkm 24 m wert_3 60,4B - 24 tkm 18 m wert_4 00,00 - wert_5 30,64 - 12 tkm 24 m wert_6 78,32 - 30 tkm 12 m wert_7 64,32 - 25 tkm 12 m wert_8 50,4B - 20 tkm 18 m wert_9 3C,4B - 15 tkm 18 m wert_10 3C,32 - 15 tkm 12 m wert_11 30,32 - 12 tkm 12 m wert_12 28,32 - 10 tkm 12 m wert_13 20,32 - 8 tkm 12 m wert_14 3C,64 - 15 tkm 24 m |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|