[thejeremyman9]

Originally Posted by Bmwerspeed123

Do you still have this issue? I have the same peoblem but I do not have a tune..

Do you have an intake? Other mods? Scan for codes? etc

[Bmwerspeed123]

Originally Posted by thejeremyman9

Do you have an intake? Other mods? Scan for codes? etc

I have a cold air intake. Only codes I get are the pdc codes (ultrasonic sensor parking distance) and i do not know why I get those codes because my parking sensors work.

Then I get 480134 ICM: direction of travel cannot be determined (no one knows what this code is)

801a55 code: the alarm has been actived.

So I get these useless codes honestly…

[thejeremyman9]

Originally Posted by Bmwerspeed123

I have a cold air intake. Only codes I get are the pdc codes (ultrasonic sensor parking distance) and i do not know why I get those codes because my parking sensors work.

Then I get 480134 ICM: direction of travel cannot be determined (no one knows what this code is)

801a55 code: the alarm has been actived.

So I get these useless codes honestly…

I assume you mean a hot air intake

Step 1 is to remove the intake as that is the most common cause of cold start issues, rough idle, etc. You can clean the MAF at the same time using the most common cleaner (CRC?)

[Bmwerspeed123]

Originally Posted by thejeremyman9

I assume you mean a hot air intake

Step 1 is to remove the intake as that is the most common cause of cold start issues, rough idle, etc. You can clean the MAF at the same time using the most common cleaner (CRC?)

I will, even if i dont really think thats the issue. I have no codes regarding it and I have no CEL but we will see. I also had 2-3 times when i drive off after cold start my car goes into transmisson not in park. So strange. I turn it back on and its fine. No stuttering no stalling etc, the car just gors into transmisson not in park and engine shuts down. As i said no code or anything regarding it