[kubax86]

Originally Posted by scouse stelth

Anyone

For SLI you need coding and FSC in KAFAS2 or Emulator

[scouse stelth]

Originally Posted by kubax86

For SLI you need coding and FSC in KAFAS2 or Emulator

I have installed a map based one on the rear of my instrument cluster and coded that but I cannot get it to work on my hud

[Siki78]

did you fdl code in kombi and activate in hu
F / G Series - KOMBI Ecu
If your vehicle has a HUD (Head-Up Display) do these. Just ignore if you don’t have a HUD.

HUD_NPI_ENABLE = aktiv
HUD_PIA_SPEED_LIM = aktiv
HUD_SPEED_LIMIT_ENABLE = aktiv
HUD_SLI_ENABLE = aktiv
PIA_HUD_SLI = aktiv
PIA_HUD_SLI_NPI = aktiv
PIA_HUD_SLI_PORTIERUNG = aktiv
PIA_HUD_VSLI = aktiv

[scouse stelth]

Originally Posted by Siki78

did you fdl code in kombi and activate in hu
F / G Series - KOMBI Ecu
If your vehicle has a HUD (Head-Up Display) do these. Just ignore if you don’t have a HUD.

HUD_NPI_ENABLE = aktiv
HUD_PIA_SPEED_LIM = aktiv
HUD_SPEED_LIMIT_ENABLE = aktiv
HUD_SLI_ENABLE = aktiv
PIA_HUD_SLI = aktiv
PIA_HUD_SLI_NPI = aktiv
PIA_HUD_SLI_PORTIERUNG = aktiv
PIA_HUD_VSLI = aktiv

Ok I’ll try these and get back to you but I am sure they all don’t come up when I see h for them.

[Al3xqq]

Can anyone help me please?

I had ordered this sli emulator https://a.aliexpress.com/_Ey4RGm9

Intalled and coded. In the dash have only 3 lines. From time to time, just a second when i start the engine shows the european circle with 3 lines and then the circle dissapear and remains just the 3 lines. This would made you think that is coded properly but not working.

I think it’s coded correctly and works because when i drive, it shows the red line on the speedometer for every limit if i overspeed, but i does not show the speed limit in a circle, down on the dash. This is my issue and i can’t find an exaplanation for this.

What you think? Is the module bad, or it still needs some extra coding?

F30, 2017, 6WB, nbt_evo, latest maps