03-13-2020, 01:41 PM | #1 |
BimmerPost Supporting Vendor
4490
Rep 1,862
Posts
Drives: powered by bootmod3
Join Date: Oct 2014
Location: www.protuningfreaks.com | www.bootmod3.com
|
bootmod3: v0.10.100 system update is now available!
Hey everyone,
Wanted to share an update on our recent update. Release 0.10.100 is now out and the changes include:
NOTE: To use the new channels, go to the About screen and click on Reset Settings. MG1/MG1 Aurix New RAM Channels listing: === Boost Category ==== Boost Setpoint Distribution Factor (Turbine/Wastegate) WGDC (Base) WGDC (Adder) WGDC (Actual) Turbine Base Turbine Adder Turbine (Actual) WGDC (I-Gain) WGDC (D-Gain) WGDC (P-Gain) Boost Target (Intake Manifold) Airmass for Boost Control === Load Category === Load (Limit) Load (Target) Load (Actual) === Turbo / Wastegate Category === Target Mass Flow (Corrected for Boost Control) Target Mass Flow (Exhaust Manifold) === Ignition Category === Ignition Timing (per Cylinder) (Target Corr.) Ignition Timing Corr. (per Cylinder) Ignition Timing (per Cylinder) Ignition Mode (Cold/Warm) Ignition Mode (Spool) Ignition Correction (Total) Ignition Target === Fuel Injection Category === Relative Fuel Mass === Torque Category === Torque for Load (Target) Torque (Actual) Torque (Target)
__________________
YouTube Channel [NEW] | Facebook User Group (20,000+ members) | Tech Support Website | Wiki | FAQ | iOS App | Android App | bootmod3 Web
Sales Support Email: sales@protuningfreaks.com | Tech Support Email: support@protuningfreaks.com Last edited by proTUNING Freaks; 03-13-2020 at 01:56 PM.. |
03-13-2020, 04:48 PM | #2 | |
Private First Class
58
Rep 198
Posts |
Quote:
|
|
Appreciate
0
|
03-13-2020, 06:07 PM | #3 |
Cheapskate
4445
Rep 4,993
Posts |
It gives you more channels and faster. I moved all my ignition timing parameters to the RAM channels. Even with all the additional timing correction data, it still logs everything at a good sample rate.
|
Appreciate
1
InstigatorX58.00 |
03-14-2020, 12:46 AM | #4 | |
Private First Class
161
Rep 151
Posts |
Quote:
__________________
Kirill @ OdinTuned
|
|
Appreciate
2
kern4174445.00 InstigatorX58.00 |
03-14-2020, 06:46 AM | #5 |
Cheapskate
4445
Rep 4,993
Posts |
Yep, forgot i also added load/torque parameters as well
|
Appreciate
0
|
03-16-2020, 11:21 AM | #7 |
BimmerPost Supporting Vendor
24095
Rep 190,633
Posts |
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
03-27-2020, 07:36 AM | #8 |
Private First Class
21
Rep 171
Posts |
So those of us with the WiFi agent we will need to update it now I assume?
Could someone please assist me with the easiest way to do that Thank you |
Appreciate
0
|
03-27-2020, 08:03 AM | #9 |
Cheapskate
4445
Rep 4,993
Posts |
When you update the app and connect to the dongle, it'll prompt you to update the obd agent.
|
Appreciate
0
|
03-27-2020, 10:17 AM | #10 | |
BimmerPost Supporting Vendor
24095
Rep 190,633
Posts |
Quote:
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
bm3, bootmod3 |
|
|