[hotnikks]

BIMMERPOST / Classifieds

Asking Price:

USD 200.00

Item Interest

Parting out I know these will fit F model 2,3 and 4 series vehicles and some E series vehicles. Price is negotiable. Paypal or cash preferred.

What you see is what is left. Cleaned up this thread to only list parts available.


Pads and rotors are basically brand new. Upgraded to performance brake kit. Here is what I have left for sale.

Details


Rotors:
(2) 340mm x 30mm Front disc rotors (Drilled and dimpled) $200 shipped.



Brand new rear dust shield set. (Pics to follow) $80 shipped






Parting out I know these will fit F model 2,3 and 4 series vehicles and may fit some E series vehicles (Sold calipers to an E-9x track car. Price is negotiable. Paypal or cash preferred.


Comes off a NC car never seen snow salt. For local pickup I'm in the Raleigh Durham area. Shipping is really expensive and the shipping quotes are for East Coast only. If you would like shipping quote for west coast send me a PM and I will work with you.

Thanks

[hotnikks]

bi-weekly bump

[hotnikks]

bump

[johnung]

Originally Posted by hotnikks

bump

FYI- a couple things..
The 340mm front rotors are 30mm thick, not 20mm.

I haven't heard of any E-series cars that these come on. For example the E-335i has totally different sized brakes. Maybe there is one, not sure

The brakes pad sensors do not continuously measure anything. They aren't that sophisticated. They simply flip on a dash light if the front left or rear right pad wears to a certain point. Any mileage number that comes up on the dash is simply a wild, usually inaccurate guestimate from some factory algorithm.

The actual BMW specification on rotor wear is that 1.6mm of metal wear material is allowed. Your front rotors began at 30mm and rears at 20mm. So the spec is to measure rotor thickness with an accurate caliper at 8 random locations and then use the lowest number. So if the fronts wear to 28.4mm or the rears to 18.4mm then they should be replaced.

Only by measuring with a caliper can remaining rotor material be determined. The average rotor lifespan is said to be 60k miles +/- 10k miles. So to have about 30k miles remaining the rotors would have to measure in 8 random spots no less than front 29.2mm and rear 19.2mm.

Hope this helps!

[hotnikks]

Originally Posted by johnung

FYI- a couple things..
The 340mm front rotors are 30mm thick, not 20mm.

I haven't heard of any E-series cars that these come on. For example the E-335i has totally different sized brakes. Maybe there is one, not sure

The brakes pad sensors do not continuously measure anything. They aren't that sophisticated. They simply flip on a dash light if the front left or rear right pad wears to a certain point. Any mileage number that comes up on the dash is simply a wild, usually inaccurate guestimate from some factory algorithm.

The actual BMW specification on rotor wear is that 1.6mm of metal wear material is allowed. Your front rotors began at 30mm and rears at 20mm. So the spec is to measure rotor thickness with an accurate caliper at 8 random locations and then use the lowest number. So if the fronts wear to 28.4mm or the rears to 18.4mm then they should be replaced.

Only by measuring with a caliper can remaining rotor material be determined. The average rotor lifespan is said to be 60k miles +/- 10k miles. So to have about 30k miles remaining the rotors would have to measure in 8 random spots no less than front 29.2mm and rear 19.2mm.

Hope this helps!

Thanks for the info. All awesome. I included the pad thickness for reference.

I didn't say they came on an any E series cars. I said they fit. I sold the calipers to a guy with an E series track car. Maybe he made some modifications I really don't know. YMMV.

[phantom3757]

interested in the front rotors. An msport already has 340 fronts so no changes would be needed?

[hotnikks]

Originally Posted by phantom3757

interested in the front rotors. An msport already has 340 fronts so no changes would be needed?

That’s correct

[F3X_BROS]

I'll take the front rotors. Sent you a pm

[Joey340i]

Rear rotors still available?

[hotnikks]

Originally Posted by Joey340i

Rear rotors still available?

Yes

[Joey340i]

Originally Posted by hotnikks

Yes

Text me. I’m not on here often. 602-828-3061

[hotnikks]

bump

[nosam1g]

Still available ?

[hotnikks]

Originally Posted by nosam1g

Still available ?

Yes if you are referring to the front rotors.

[nosam1g]

hey guys got scammed Buyers Beware. Shortly after you responded i get a text message from #19717081836... he responds as hotnikks . Replies with the pictures from here and he name is Robert Wold. He insists he doesnt have paypal nor doesnt use ebay , so already suspicious. I thought it was hotnikks because the response was right after i posted in here. Anyways long story short i sent a partial payment to his zelle rswold@yahoo.com. I told him to send the money back and havent got a response since.

He took pictures of this listing ... some other one with Carbon Mirror Caps , and another stating he has rear rotors and calipers as well.. BEWARE ***

Found the guy on the forums who did it , his ID IS Stanjenrid

https://f30.bimmerpost.com/forums/me...vmessage113112

[TomFord514]

Originally Posted by nosam1g

hey guys got scammed Buyers Beware. Shortly after you responded i get a text message from #19717081836... he responds as hotnikks . Replies with the pictures from here and he name is Robert Wold. He insists he doesnt have paypal nor doesnt use ebay , so already suspicious. I thought it was hotnikks because the response was right after i posted in here. Anyways long story short i sent a partial payment to his zelle rswold@yahoo.com. I told him to send the money back and havent got a response since.

He took pictures of this listing ... some other one with Carbon Mirror Caps , and another stating he has rear rotors and calipers as well.. BEWARE ***

Found the guy on the forums who did it , his ID IS Stanjenrid

https://f30.bimmerpost.com/forums/me...vmessage113112

Originally Posted by nosam1g

hey guys got scammed Buyers Beware. Shortly after you responded i get a text message from #19717081836... he responds as hotnikks . Replies with the pictures from here and he name is Robert Wold. He insists he doesnt have paypal nor doesnt use ebay , so already suspicious. I thought it was hotnikks because the response was right after i posted in here. Anyways long story short i sent a partial payment to his zelle rswold@yahoo.com. I told him to send the money back and havent got a response since.

He took pictures of this listing ... some other one with Carbon Mirror Caps , and another stating he has rear rotors and calipers as well.. BEWARE ***

Found the guy on the forums who did it , his ID IS Stanjenrid

https://f30.bimmerpost.com/forums/me...vmessage113112

Tried to scam me also with the calipers. His approach is terrible and very pushy!

[Harbbyc]

How much for local pick up?

[hotnikks]

Originally Posted by nosam1g

hey guys got scammed Buyers Beware. Shortly after you responded i get a text message from #19717081836... he responds as hotnikks . Replies with the pictures from here and he name is Robert Wold. He insists he doesnt have paypal nor doesnt use ebay , so already suspicious. I thought it was hotnikks because the response was right after i posted in here. Anyways long story short i sent a partial payment to his zelle rswold@yahoo.com. I told him to send the money back and havent got a response since.

He took pictures of this listing ... some other one with Carbon Mirror Caps , and another stating he has rear rotors and calipers as well.. BEWARE ***

Found the guy on the forums who did it , his ID IS Stanjenrid

https://f30.bimmerpost.com/forums/me...vmessage113112

Sorry dude I hate scammers.

[hotnikks]

Originally Posted by Harbbyc

How much for local pick up?

I stopped getting notifications for this thread for some reason. Apologies.

Local pickup $100

[bigaizsosexy]

Originally Posted by hotnikks

I stopped getting notifications for this thread for some reason. Apologies.

Local pickup $100

Fronts and rear rotors/pads still available? I'll cover the shipping with a label

I have a 340i Msport with the msport brakes but not the msport rotors.

[johnung]

Originally Posted by bigaizsosexy

Fronts and rear rotors/pads still available? I'll cover the shipping with a label

I have a 340i Msport with the msport brakes but not the msport rotors.

It's not really clear what you are saying that you "don't have M Sport rotors". If you have a 340i with M Sport Brakes then the calipers are blue. And the front rotor is 370mm x 30mm and the rear rotor is 345mm x 24mm.

If the calipers were Grey, then they'd be F340x30, R330x20.

Each F3x caliper takes a specific sized rotor, and vise versa.

[bigaizsosexy]

Originally Posted by johnung

It's not really clear what you are saying that you "don't have M Sport rotors". If you have a 340i with M Sport Brakes then the calipers are blue. And the front rotor is 370mm x 30mm and the rear rotor is 345mm x 24mm.

If the calipers were Grey, then they'd be F340x30, R330x20.

Each F3x caliper takes a specific sized rotor, and vise versa.

Thanks for clarifying. I was vague.

I have the msport brakes (blue calipers) but I do not have the slotted and dimpled rotors. Just regular rotors.