07-20-2023, 01:33 AM | #1 |
New Member
2
Rep 6
Posts |
Coding Help for Newbie
Hi Guys, I'm new to the Forum and also a proud new owner, of a fully optioned, 2023 M340i xDrive (LCI).
I have read through countless pages of coding procedures, for the 2023 3 series, but at this stage I'm beginning to tear my hair out. No matter what I try, to connect my Samsung S23+ to my car, using an eNet cable and Bimmercode, nothing works. I have tried Ignition on, Ignition off, Diagnostic mode, flight mode, etc etc. I have tried static connection settings as recommended on the forums, but that doesn't work either. The one problem I have noticed, is that when I connect a eNet cable with adapter to my phone, I am unable to "Save" any static IP address settings, the save button is always greyed out!! Has anyone managed to connect Bimmercode, to this new model Bimmer, or are there security settings within the ECU, stopping any connection? I would appreciate any and all help, to connect using the correct procedure. I just want to only code a few items, but I am beginning to wonder, if this is at all possible on this Aussie model! |
Post Reply |
Bookmarks |
|
|