04-11-2021, 10:04 AM | #1 |
Registered
0
Rep 3
Posts |
Bootmod3 flash issues
Hello, first post but I have learned a lot from everyone lurking over the years. Today I need some advise on my '16 435. this is my first time trying to flash a car and I have run into an issue. I am using the Bootmod3 and the wifi adaptor. when I flash the car I am getting a DME coding error and a fuel system error on the dash. I went through BM3's trouble shooting and have not had any success. I am hoping that I have made a simple error and someone might be able to help me out. I don't want to mess anything up worse than I already have. Of course its the weekend and their tech support is closed till Monday, so I'm stuck and need to get to work tomorrow.
I attached a couple pics of the error messages. Thanks in advance. |
07-05-2021, 11:01 PM | #2 |
Registered
0
Rep 2
Posts |
Did you ever figure out the issue? I had the chassis stabilization, drivetrain malfunction and fuel system contin. light all pop on after doing a oil change. Now car won't start or attempt to turn over?
|
Appreciate
0
|
07-06-2021, 09:11 PM | #3 |
Registered
0
Rep 3
Posts |
Yes I did end up getting it sorted out. It ended up being an issue on BM3’s end. I had to get the car towed and the tech had to log in using a laptop and then they basically took over the computer and did their thing. It is a completely different car with the tune and I only have stage one and a catted down pipe. It was a pain in the ass but I guess worth it in the long run.
|
Appreciate
0
|
07-13-2021, 07:15 AM | #5 |
Registered
0
Rep 3
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|