04-19-2019, 05:50 PM | #1 |
Registered
0
Rep 2
Posts |
OEM 666M Wheels - F31 xDrive Fitment
Fellow Bimmer Owners,
I've looked far and wide on the forums for info. regarding this. There doesn't seem to be any concrete information on this. Will it be ok for an F31 xDrive to run OEM 20" 666M wheels? 265/30 R20 94Y - 9Jx20 ET29 285/30 R20 99Y - 10Jx20 ET40 Thanks to anyone who can provide some insight on this. Cheers! ***EDIT***: Did some more digging and realized the diameter difference is: 26.3" 26.7" +1.5% Will this be a huge problem? Or is there a recommended running for the tires? Or should I just scrap the idea altogether?
__________________
Current Baby - F31 320d xDrive M Performance
Last edited by nordicastar; 04-19-2019 at 06:01 PM.. Reason: Updated Information / Research |
04-19-2019, 06:11 PM | #2 |
Second Lieutenant
95
Rep 274
Posts |
You can eliminate diameter difference of the wheel by choosing appropriate tyre sizing (taller sidewall at front to match shorter sidewall at rear)
There is then some camber adjustment needed but other than that it's not impossible to do.
__________________
2017 F15 40i ePerformance -M Sport
|
Appreciate
0
|
04-19-2019, 10:13 PM | #3 |
Brigadier General
3072
Rep 4,315
Posts |
you need to change the front and rear tire sizes to 235/35/20, 275/30/20 both diameters are the same at 26.5", perfect for x-drive. 275 will sit squarely on the 10" wide rear but 235/35/20 will be slightly stretched up front...
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|