| 09-21-2025, 05:48 AM | #1 |
|
Registered
0
Rep 3
Posts |
F30 DRL
Hey I want to install RGB DRL which I could control with remote control or phone app but I say some videos on Youtube that i have to remove both front wheels and front bumper to modify the drl module. Did someone also change it and has some experience with it?
|
| 10-02-2025, 11:05 AM | #2 |
|
Private
![]() 21
Rep 74
Posts
Drives: Bmw F10 550i
Join Date: Dec 2022
Location: Arizona
|
You can get them out without removing the bumper but it's only a few more bolts along the top & 4 or so on the bottom and its off.. It's worth the extra time to just pull it off for better access. Otherwise you need to remove the entire light & might possibly have to re align once re-installed.. If your good with tools it should take less than an hr to remove the front cover for access to the lights.
Good luck!! Fyi the two lower bolts that hold the lights have lock-tite or something similar on em, so make sure to be careful with those as the clip can break & make it difficult to get free.. Last edited by Trusststaging; 10-02-2025 at 11:07 AM.. |
|
Appreciate
0
|
Post Reply |
| Bookmarks |
| Thread Tools | |
|
|