F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > F30 DIYs and Coding Discussions > Coding cable and ESYS, psdzdata
Extreme Powerhouse
Post Reply
 
Thread Tools Search this Thread
      12-21-2019, 09:36 AM   #3081
shawnsheridan
General
shawnsheridan's Avatar
United_States
3982
Rep
21,442
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by lukas85 View Post
I'm getting this error after changing value in FA editor
"Not all elements of the FA were found in the FA2FP: Type code 8D91"

Means the Option Codes in FA are somehow not compatible with the revised Typschlussel. Need to look at FA for a factory Euro Spec same car, and see where FA differs.

Again, this is very broad chnage. You are better off finding Sidemarker FDL Codes and changing only those.

Good luck with it.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      12-23-2019, 02:22 PM   #3082
lukas85
New Member
0
Rep
22
Posts

Drives: BMW F30
Join Date: Dec 2019
Location: Poland

iTrader: (0)

Ok, some progress with lights. I replaced the LED module (right one) in my car. Now blinkers works in that particular lamp but only for 2 seconds. Then it disables and no longer works.

The left lamp needs to be replaced again, something is totally wrong with this one so now I'm not going to work on it right now, waiting for part to be delivered.

Here is the behavior show on left lamp after turning singal right.

https://photos.google.com/photo/AF1Q...JSLiMQiMzCSazt

So as you can se it only blinks twice....than it shuts off.

Ista+ says...

Last edited by lukas85; 12-23-2019 at 02:52 PM..
Appreciate 0
      01-16-2020, 10:26 PM   #3083
efrant
Registered
Canada
0
Rep
3
Posts

Drives: 2016 BMW 340i xDrive
Join Date: Jun 2015
Location: Montreal

iTrader: (0)

@shawnsheridan Could I get a PM please? Thanks.
Appreciate 0
      01-16-2020, 11:20 PM   #3084
shawnsheridan
General
shawnsheridan's Avatar
United_States
3982
Rep
21,442
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by efrant View Post
@shawnsheridan Could I get a PM please? Thanks.
PM sent.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 1
efrant0.00

      02-01-2020, 04:46 AM   #3085
t660
Registered
0
Rep
1
Posts

Drives: BMW M2C
Join Date: Feb 2020
Location: Downunder

iTrader: (0)

Hi Guys,

Just starting out here.
Got Esys 3.27.1 with psdzdata lite v63.3. EST with PIN is configured and working.

Trying to do some coding with an F87 M2C.
I'm able to connect, activate FA, load coding values.
However when I try Edit FDL all I get is dots with no descriptions.

Can I get a hand with deciphering this?
shawnsheridan ??
Appreciate 0
      02-01-2020, 09:46 AM   #3086
shawnsheridan
General
shawnsheridan's Avatar
United_States
3982
Rep
21,442
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by t660 View Post
Hi Guys,

Just starting out here.
Got Esys 3.27.1 with psdzdata lite v63.3. EST with PIN is configured and working.

Trying to do some coding with an F87 M2C.
I'm able to connect, activate FA, load coding values.
However when I try Edit FDL all I get is dots with no descriptions.

Can I get a hand with deciphering this?
shawnsheridan ??
Update your E-Sys Launcher to PRO 2.8.2:

http://tokenmaster.blogspot.com/2019...r-pro-282.html
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      02-15-2020, 04:23 AM   #3087
bajko
Registered
0
Rep
2
Posts

Drives: BMW F10
Join Date: Feb 2020
Location: Slovenia

iTrader: (0)

link

Hi shawnsheridan,

Would you mind sending me a link to the working version of Esys and psdzdata? New to this, I want to be sure not screw up something:-)

Many thanks in advance.
Appreciate 0
      02-15-2020, 10:30 AM   #3088
shawnsheridan
General
shawnsheridan's Avatar
United_States
3982
Rep
21,442
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by bajko View Post
Hi shawnsheridan,

Would you mind sending me a link to the working version of Esys and psdzdata? New to this, I want to be sure not screw up something:-)

Many thanks in advance.
PM sent.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      02-15-2020, 04:03 PM   #3089
bajko
Registered
0
Rep
2
Posts

Drives: BMW F10
Join Date: Feb 2020
Location: Slovenia

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
PM sent.
Thanks a lot!!
Appreciate 0
      02-16-2020, 12:47 AM   #3090
Oktober man
New Member
Canada
2
Rep
24
Posts

Drives: 2018, F48 28i
Join Date: Nov 2018
Location: Vancouver BC

iTrader: (0)

Hi Shawn I am having problems with my first time coding. I use Esys launcher pro 2.8.2. Esys 3.27.1. PSdZ data lite 4.21.32.7. but when I connect and try to VO code. When i tried to code the first ECUs out of four. It stopped working. Would you mind to correct me if I did something wrong. Thanks in advance.

I tried using the PSdZ version 63.3. When I activate FA it was looping

If any one can help me with this I appreciate.
Appreciate 0
      02-16-2020, 04:31 AM   #3091
atzebmw
Major
Germany
295
Rep
1,311
Posts

Drives: BMW 335XD F30 LCI
Join Date: May 2016
Location: Germany

iTrader: (0)

Quote:
Originally Posted by Oktober man View Post
Hi Shawn I am having problems with my first time coding. I use Esys launcher pro 2.8.2. Esys 3.27.1. PSdZ data lite 4.21.32.7. but when I connect and try to VO code. When I tried to calculate FA. It stopped working. Would you mind to correct me if I did something wrong. Thanks in advance.
You can write him a PM if you have a question for him.
I know the answer, but Im not Shawn.
Appreciate 1
      02-16-2020, 08:08 AM   #3092
Oktober man
New Member
Canada
2
Rep
24
Posts

Drives: 2018, F48 28i
Join Date: Nov 2018
Location: Vancouver BC

iTrader: (0)

Quote:
Originally Posted by atzebmw View Post
Quote:
Originally Posted by Oktober man View Post
Hi Shawn I am having problems with my first time coding. I use Esys launcher pro 2.8.2. Esys 3.27.1. PSdZ data lite 4.21.32.7. but when I connect and try to VO code. When I tried to calculate FA. It stopped working. Would you mind to correct me if I did something wrong. Thanks in advance.
You can write him a PM if you have a question for him.
I know the answer, but I'm not Shawn.
[QUOTE=atzebmw;25813466]


I appreciate any help you can give. Thanks.
Appreciate 0
      02-16-2020, 11:57 AM   #3093
atzebmw
Major
Germany
295
Rep
1,311
Posts

Drives: BMW 335XD F30 LCI
Join Date: May 2016
Location: Germany

iTrader: (0)

Quote:
Originally Posted by Oktober man View Post
Hi Shawn I am having problems with my first time coding. I use Esys launcher pro 2.8.2. Esys 3.27.1. PSdZ data lite 4.21.32.7. but when I connect and try to VO code. When I tried to calculate FA. It stopped working. Would you mind to correct me if I did something wrong. Thanks in advance.

If any one can help me with this I appreciate.
Your psdzdata are too new or your E-Sys 3.27.1 is too old.
E-Sys 3.27.1 doesn't work anymore correctly with the current psdzdata.
You should use older psdzdata if your car didn't get an update lately.
Because Launcher Pro 2.8.2 also doesn't work with newer E-Sys versions (except 3.28, but it also needs older psdzdata).

Edit:
If you only want to VO code something you don't need the Launcher Pro and you can start E-Sys directly from it's folder.
Then you can also use a newer E-Sys version and the current psdzdata.
Appreciate 1
      02-16-2020, 12:01 PM   #3094
Oktober man
New Member
Canada
2
Rep
24
Posts

Drives: 2018, F48 28i
Join Date: Nov 2018
Location: Vancouver BC

iTrader: (0)

Quote:
Originally Posted by atzebmw View Post
Quote:
Originally Posted by Oktober man View Post
Hi Shawn I am having problems with my first time coding. I use Esys launcher pro 2.8.2. Esys 3.27.1. PSdZ data lite 4.21.32.7. but when I connect and try to VO code. When I tried to calculate FA. It stopped working. Would you mind to correct me if I did something wrong. Thanks in advance.

If any one can help me with this I appreciate.
Your psdzdata are too new or your E-Sys 3.27.1 is too old.
E-Sys 3.27.1 doesn't work anymore correctly with the current psdzdata.
You should use older psdzdata if your car didn't get an update lately.
Because Launcher Pro 2.8.2 also doesn't work with newer E-Sys versions (except 3.28, but it also needs older psdzdata).
I found PSdZ version 63.3 and used it but when I use to activate FA it is looping. Can u show me the right version I should use?

I see so if I open the Esys directly using the newer PSdZ light. is coding process change or same as the launcher?
Appreciate 0
      02-16-2020, 12:16 PM   #3095
shawnsheridan
General
shawnsheridan's Avatar
United_States
3982
Rep
21,442
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by atzebmw View Post
Your psdzdata are too new or your E-Sys 3.27.1 is too old.
E-Sys 3.27.1 doesn't work anymore correctly with the current psdzdata.
You should use older psdzdata if your car didn't get an update lately.
Because Launcher Pro 2.8.2 also doesn't work with newer E-Sys versions (except 3.28, but it also needs older psdzdata).

Edit:
If you only want VO code something you don't need the Launcher Pro and you can start E-Sys directly from it's folder.
Then you can also use a newer E-Sys version and the current psdzdata.
Launcher PRO 2.x supports E-Sys 3.27.1 since 2.2.2 Build 80 and though last 2.9.6 Build 255 version.

E-Sys 3.27.1 supports Latest PSdZData except for CAFD Injection and Programming. FDL Coding and VO Coding works fine. It can be that Calculate FA is also not working as you suggest. I have not tested it myself.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      02-16-2020, 12:25 PM   #3096
Oktober man
New Member
Canada
2
Rep
24
Posts

Drives: 2018, F48 28i
Join Date: Nov 2018
Location: Vancouver BC

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
Quote:
Originally Posted by atzebmw View Post
Your psdzdata are too new or your E-Sys 3.27.1 is too old.
E-Sys 3.27.1 doesn't work anymore correctly with the current psdzdata.
You should use older psdzdata if your car didn't get an update lately.
Because Launcher Pro 2.8.2 also doesn't work with newer E-Sys versions (except 3.28, but it also needs older psdzdata).

Edit:
If you only want VO code something you don't need the Launcher Pro and you can start E-Sys directly from it's folder.
Then you can also use a newer E-Sys version and the current psdzdata.
Launcher PRO 2.x supports E-Sys 3.27.1 since 2.2.2 Build 80 and though last 2.9.6 Build 255 version.

E-Sys 3.27.1 supports Latest PSdZData except for CAFD Injection and Programming. FDL Coding and VO Coding works fine. It can be that Calculate FA is also not working as you suggest. I have not tested it myself.
I corrected. All work fine untill I need to start coding ECUs. I am adding 2VB option. Following ECU need to code BDC body, Kombi,HU ENTRY NAV and DSC2. When I start coding the first ECU, the software closed and just desktop was on the screen.

So I switched to PSD 62.3 and that's when the loop starts when I calculate FA..

thanks for the replies. mine is 2018 F48, built 2017 November

Last edited by Oktober man; 02-16-2020 at 12:30 PM..
Appreciate 0
      02-16-2020, 12:30 PM   #3097
atzebmw
Major
Germany
295
Rep
1,311
Posts

Drives: BMW 335XD F30 LCI
Join Date: May 2016
Location: Germany

iTrader: (0)

Quote:
Originally Posted by Oktober man View Post
I found PSdZ version 63.3 and used it but when I use to activate FA it is looping. Can u show me the right version I should use?

I see so if I open the Esys directly using the newer PSdZ light. is coding process change or same as the launcher?
psdzdata 63.3 should work with E-Sys 3.27.1.
But here you have the psdzdata Lite 4.17.11 which work definitely with E-Sys 3.27.1
https://mega.nz/#!ZGYhCYTY!AG4Mg5RJr...Uj6ELL2MNPBeEw
Sometimes it's taking a little bit time to activate the FA, but should not take more than 1 minute.
With Launcher you can do FDL coding (button "Code FDL"), which means you can change individual values with the FDL Editor.
VO Coding (Button "Code") is changing values automatically relating to the FA. For VO coding you don't need the Launcher Pro.
Here you can download E-Sys 3.31 if you want to use newer psdzdata and don't need a Launcher.
https://mega.nz/#!TggkDQaQ!SOKuNwrPP...G4I8ohD3p_5x3M
Appreciate 1
      02-16-2020, 12:45 PM   #3098
Oktober man
New Member
Canada
2
Rep
24
Posts

Drives: 2018, F48 28i
Join Date: Nov 2018
Location: Vancouver BC

iTrader: (0)

I did missed this step below. this might be the reason I failed. my another question is what value to put in places of X. or leave as they are?

05) Make sure that there is an empty "dist" folder in each of the psdzdata chassis folders, and if missing, create as
needed, e.g.:
• C:\Data\psdzdata\mainseries\F001\F001_xx_xx_xxx\od x\dist
• C:\Data\psdzdata\mainseries\F010\F010_xx_xx_xxx\od x\dist
• C:\Data\psdzdata\mainseries\F020\F020_xx_xx_xxx\od x\dist
• C:\Data\psdzdata\mainseries\F025\F025_xx_xx_xxx\od x\dist
• C:\Data\psdzdata\mainseries\F056\F056_xx_xx_xxx\od x\dist
Appreciate 0
      02-16-2020, 12:50 PM   #3099
shawnsheridan
General
shawnsheridan's Avatar
United_States
3982
Rep
21,442
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by Oktober man View Post
I did missed this step below. this might be the reason I failed. my another question is what value to put in places of X. or leave as they are?

05) Make sure that there is an empty "dist" folder in each of the psdzdata chassis folders, and if missing, create as
needed, e.g.:
C:\Data\psdzdata\mainseries\F001\F001_xx_xx_xxx\od x\dist
C:\Data\psdzdata\mainseries\F010\F010_xx_xx_xxx\od x\dist
C:\Data\psdzdata\mainseries\F020\F020_xx_xx_xxx\od x\dist
C:\Data\psdzdata\mainseries\F025\F025_xx_xx_xxx\od x\dist
C:\Data\psdzdata\mainseries\F056\F056_xx_xx_xxx\od x\dist
This is only if you have Missing Connection Targets in E-Sys. If you connected to car, this is not an issue for you.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 1
      02-16-2020, 12:54 PM   #3100
Oktober man
New Member
Canada
2
Rep
24
Posts

Drives: 2018, F48 28i
Join Date: Nov 2018
Location: Vancouver BC

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
This is only if you have Missing Connection Targets in E-Sys. If you connected to car, this is not an issue for you.
I can connect without issue. Shawn.
Appreciate 0
      02-16-2020, 12:57 PM   #3101
shawnsheridan
General
shawnsheridan's Avatar
United_States
3982
Rep
21,442
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by Oktober man View Post
I can connect without issue. Shawn.
Try using E-Sys 3.3x, Launcher PRO 2.8.2, and v4.21.32 PSdZData. PM sent.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 1
      02-16-2020, 01:53 PM   #3102
Oktober man
New Member
Canada
2
Rep
24
Posts

Drives: 2018, F48 28i
Join Date: Nov 2018
Location: Vancouver BC

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
Try using E-Sys 3.3x, Launcher PRO 2.8.2, and v4.21.32 PSdZData. PM sent.
I tried. the launcher pop up says unsupported version.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 12:34 PM.




f30post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST