05-18-2019, 02:54 PM | #1 |
Private
50
Rep 50
Posts |
Custom DIY oil catch can
Step 1: remove PVC hose and use a heat gun to remove flexible hose from connectors (see mishimoto catch can how to video)
Step 2: install 32mm to 19mm hose adapter on each side Step 3: mount oil catch can. there is a little bracket by the strut tower that worked perfect. Step 4: cut 19mm hose how you see fit. I used some stainless steel braided line...looks awfully pretty IMO. Step 5: clamp everything down and done. |
Post Reply |
Bookmarks |
|
|