07-24-2020, 10:43 AM | #1 |
Major
467
Rep 1,055
Posts |
Sqwinny's 2013 F30 328i
Hi F30Post,
Figured I'd make a quick little progress thread to share a basic build of the car. 2013 328i M-sport 6MT When I first picked it up: First mod, 3m ceramic tint (20% all around): Full 1 step detail by hand: Added an M-Style ABS plastic rear wing: Did a 335i rear muffler conversion: Found a great deal on OEM LCI tails and did the retrofit. OEM wiring harness from Germany took forever. I Also added Rolling Gears 3.5 exhaust tips: Saw a local MG F30 rolling around with this piece, so I also added a rear roof spoiler. Matches the wing and is a small detail that makes it not seem like a standard car: Ikon Motorsport M-Sport Style front lip two-tone test fit. I also picked up gloss black kidney grills along the way: Current Performance Mods: Modded Circuit works DP (cut downpipe to factory pipe 1" to fit into the stock exhaust to fit Removed only OEM resonator with a straight pipe Famous $200 G-Plus 5" Intercooler OEM 513m M4 Wheels (18x9, 18x10) OEM M3/M4 Brake Setup BM3 stage 2 E30 tune Exterior Mods M Sport Style Gloss Black Kidney Grills M Sport Style Gloss Black diffuser M Sport Style low ABS Wing ABS Rear Window Spoiler 30% 3m Crystalline Tint (seriously car is colder than regular tint) Rolling Gears 3.5" Exhaust Tips Interior Mods OEM Rubber Sportline Mats w/matching Trunk liner OEM BMW Door Pocket Umbrellas OEM LCI HVAC LED retrofit OEM BMW Sunshade Rennline Magnetic Phone Mount (seriously THE BEST phone mount and should be OEM) eBay Black Sunglass Holder (replaces drivers side roof handle) LED Door light inserts Other things are coming as they are shipped/when I upload photos Last edited by sqwinny; 03-20-2023 at 08:56 PM.. |
07-24-2020, 12:40 PM | #2 |
BimmerPost Supporting Vendor
662
Rep 1,276
Posts |
Nice cosmetic mods buddy. Congrats.
__________________
*** TAX SALE *** Get Cashback When You Order This Month! ** Check Out Our Sale Section!
Phone 725-221-5267 || website www.x-ph.com |
Appreciate
0
|
07-26-2020, 06:01 PM | #4 |
Major
467
Rep 1,055
Posts |
Thanks! I have more but these are all I have uploaded thus far
Haha almost, although stage 2 N20 surprises some of the n54/n55 guys with no muffler and burble tunes |
Appreciate
0
|
07-27-2020, 12:11 PM | #5 |
BimmerPost Supporting Vendor
662
Rep 1,276
Posts |
Wait until you put the rest of your performance mods in.
__________________
*** TAX SALE *** Get Cashback When You Order This Month! ** Check Out Our Sale Section!
Phone 725-221-5267 || website www.x-ph.com |
Appreciate
0
|
03-20-2023, 09:00 PM | #6 |
Major
467
Rep 1,055
Posts |
man this thread is old and a lot has changed, but ill put photos and updates in there.
got lucky and was able to score some m4 brake calipers from a buddy. installed those with power slot 370mm rotors in the front and 345mm rotors in the back:
__________________
MY13: TTE400 Stage 2 turbo, Spec Single Mass flywheel + Stage 3+ Clutch, FTP V2 Turbo Inlet, Evolution Racewerks Charge pipe + Boost pipe + Intercooler, Turbosmart Recirculating Diverter Valve, aFE grill scoop + aFE Magnum Force Cold Air Intake, B58 coil retrofit, eBay Downpipe, Active Autowerke muffler, DW400 LPFP, B58TU HPFP, M5 s63TU injectors, Bimmermilvs, e80 tune by Navardi Tuned. 380 whp/360 wheel torque stock block
|
Appreciate
1
squaredphoto369.00 |
03-20-2023, 09:03 PM | #7 |
Major
467
Rep 1,055
Posts |
following week I put on the 513m wheels and this is the stance with factory suspension + m4 brakes installed. looks like the brakes and the wheel setup is ideal.
for stance + poke, this is the poke/fitment. not sure why bimmerpost is rotating images. sorry
__________________
MY13: TTE400 Stage 2 turbo, Spec Single Mass flywheel + Stage 3+ Clutch, FTP V2 Turbo Inlet, Evolution Racewerks Charge pipe + Boost pipe + Intercooler, Turbosmart Recirculating Diverter Valve, aFE grill scoop + aFE Magnum Force Cold Air Intake, B58 coil retrofit, eBay Downpipe, Active Autowerke muffler, DW400 LPFP, B58TU HPFP, M5 s63TU injectors, Bimmermilvs, e80 tune by Navardi Tuned. 380 whp/360 wheel torque stock block
Last edited by sqwinny; 03-20-2023 at 09:12 PM.. |
Appreciate
0
|
03-20-2023, 09:06 PM | #8 |
Major
467
Rep 1,055
Posts |
swapped the front lip out for something a little more aggressive + KG splitters and the intercooler setup to an ATM 6" unit
__________________
MY13: TTE400 Stage 2 turbo, Spec Single Mass flywheel + Stage 3+ Clutch, FTP V2 Turbo Inlet, Evolution Racewerks Charge pipe + Boost pipe + Intercooler, Turbosmart Recirculating Diverter Valve, aFE grill scoop + aFE Magnum Force Cold Air Intake, B58 coil retrofit, eBay Downpipe, Active Autowerke muffler, DW400 LPFP, B58TU HPFP, M5 s63TU injectors, Bimmermilvs, e80 tune by Navardi Tuned. 380 whp/360 wheel torque stock block
|
Appreciate
0
|
03-20-2023, 09:09 PM | #9 |
Major
467
Rep 1,055
Posts |
for fun, wanted to see what the car made with the stock turbo and OTS Stage 2 93 tune:
280/307 on pump 93. not bad for stock turbo mod list at the time of this dyno: Bootmod3 Stage 2 93 OTS tune aFE grill scoop aFE Magnum Force Stage 2 Intake FTP turbo inlet Go Fast Bits DV+ FTP Turbo to Intercooler pipe ATM Intercooler FTP Charge Pipe Cat-less downpipe OEM mid-pipe (no cats on n20 variant) + removed resonator 335/340i Active Autowerks muffler
__________________
MY13: TTE400 Stage 2 turbo, Spec Single Mass flywheel + Stage 3+ Clutch, FTP V2 Turbo Inlet, Evolution Racewerks Charge pipe + Boost pipe + Intercooler, Turbosmart Recirculating Diverter Valve, aFE grill scoop + aFE Magnum Force Cold Air Intake, B58 coil retrofit, eBay Downpipe, Active Autowerke muffler, DW400 LPFP, B58TU HPFP, M5 s63TU injectors, Bimmermilvs, e80 tune by Navardi Tuned. 380 whp/360 wheel torque stock block
|
Appreciate
0
|
03-20-2023, 09:14 PM | #10 |
Major
467
Rep 1,055
Posts |
I ended up wanting more power, went The Turbo Engineers TTE400. Installed a b58tu retrofit kit as well.
Louder + fun + fast spool. Car sound even more like a cummins diesel at this point: https://youtube.com/shorts/6k-mIRKyL2o Also decided to dyno the car on 23psi Mod list: aFE grill scoop aFE Magnum Force Stage 2 Intake FTP V2 Turbo Inlet Forge Motorsport recirculating BOV with blue spring (23-30 psi rated) FTP Turbo to Intercooler pipe ATM/CSF 6" Intercooler FTP Charge Pipe Precision Raceworks Coils with imported dwell times Catless down pipe OEM mid-pipe (no cats on n20 variant) + removed resonator 335i Active Autowerks muffler Tune: Custom Navardi e80 tune Turbo Stage 2 TTE400 Fuel Stock LPFP B58tu HPFP S63tu Injectors
__________________
MY13: TTE400 Stage 2 turbo, Spec Single Mass flywheel + Stage 3+ Clutch, FTP V2 Turbo Inlet, Evolution Racewerks Charge pipe + Boost pipe + Intercooler, Turbosmart Recirculating Diverter Valve, aFE grill scoop + aFE Magnum Force Cold Air Intake, B58 coil retrofit, eBay Downpipe, Active Autowerke muffler, DW400 LPFP, B58TU HPFP, M5 s63TU injectors, Bimmermilvs, e80 tune by Navardi Tuned. 380 whp/360 wheel torque stock block
|
Appreciate
0
|
03-20-2023, 09:21 PM | #11 |
Major
467
Rep 1,055
Posts |
Did some changes as I wanted to increase intake flow + efficiency. Was able to pick up a set of BimmerMilvs and install them (gives 1mm of lift and 3 degrees more intake duration) Stock valvetronic support is in the middle. Material is removed from different areas of the support
__________________
MY13: TTE400 Stage 2 turbo, Spec Single Mass flywheel + Stage 3+ Clutch, FTP V2 Turbo Inlet, Evolution Racewerks Charge pipe + Boost pipe + Intercooler, Turbosmart Recirculating Diverter Valve, aFE grill scoop + aFE Magnum Force Cold Air Intake, B58 coil retrofit, eBay Downpipe, Active Autowerke muffler, DW400 LPFP, B58TU HPFP, M5 s63TU injectors, Bimmermilvs, e80 tune by Navardi Tuned. 380 whp/360 wheel torque stock block
|
Appreciate
0
|
03-20-2023, 09:28 PM | #12 |
Major
467
Rep 1,055
Posts |
Officially the first n20/n26 with a little modification to do the b58 coil retrofit. Modified the wiring to look OEM after the test fit.
Photo of the engine bay with cerakote charge + boost pipes and actually clean. OEM+ for those who don't know (removed the airbox and cover for the intake to show off the pipes)
__________________
MY13: TTE400 Stage 2 turbo, Spec Single Mass flywheel + Stage 3+ Clutch, FTP V2 Turbo Inlet, Evolution Racewerks Charge pipe + Boost pipe + Intercooler, Turbosmart Recirculating Diverter Valve, aFE grill scoop + aFE Magnum Force Cold Air Intake, B58 coil retrofit, eBay Downpipe, Active Autowerke muffler, DW400 LPFP, B58TU HPFP, M5 s63TU injectors, Bimmermilvs, e80 tune by Navardi Tuned. 380 whp/360 wheel torque stock block
|
Appreciate
1
squaredphoto369.00 |
Post Reply |
Bookmarks |
|
|