[toxik]

Originally Posted by CoopersF15

When you say “drilling out the plastic rivets - can you mark on your picture where those are located please?

if you want a visual representation of what and how it needs to be done, this video is pretty good:

[_ObiJon]

Go slow! Last thing you want to do is drill through the seemingly thin cardboard.

[Pilifica]

Originally Posted by _ObiJon

Go slow! Last thing you want to do is drill through the seemingly thin cardboard.

Hey there!

I have an F30 from 2013.
Is it possible to change the inner part of the door handle without taking down the whole door?
With something like a long screw ?

Thanks

[_ObiJon]

Originally Posted by Pilifica

Hey there!

I have an F30 from 2013.
Is it possible to change the inner part of the door handle without taking down the whole door?
With something like a long screw ?

Thanks

Nope, the door card must be removed, which honestly isn't bad. It needs to be removed as the plastic rivets need to be drilled out but also the new screws are mounted from the inside.

[scubajim]

I did my sons 535 and my 435 this year. I think the scariest part is popping the door card. It feels like something is braking while you attempt to separate the inner panel from the door. as obijon said go slow, watch some videos! Don't over drill the melted tab that's holding the original handle in place. It's a compressed fiber board, not exceptionally durable. I purchased my new handles from amazon. I ordered a few, returned what I didn't use, can't say it's a perfect color match (beige) but honestly, I am the only one that can tell.

[NxTH]

Originally Posted by Pilifica

Hey there!

I have an F30 from 2013.
Is it possible to change the inner part of the door handle without taking down the whole door?
With something like a long screw ?

Thanks

A very good alternative is to just cover them up. https://www.amazon.de/-/en/dp/B09KND...v_ov_lig_dp_it

[Donny85]

Hi all, made this swap myself recently in the UK. I’ve got an F3/, did both door handles. Bought the repalcement handles from ebay https://www.ebay.co.uk/itm/395105163...mis&media=COPY

And followed this video to install

It was tough at first taking a drill to my door card, but once the anxiety is out of the way, it’s actually pretty easy. Takes half hour to fix, and well worth it for a few quid!

[Oh_janet]

I just got these- amazon.com/Gelunxin-Handle-Cover-2012-2018-2014-2017 they snapped right on and covered up the gummy handles