Is it save?

Johny212 · 03-25-2019, 03:23 AM

Hello everyone,

Is it safe to code with bimmercode if you have chipped F30?
It will not reset a chip after coding? Every performed coding there is an reset of ECU...

I know most of the changes its only function on/off but in expert mode you can do a little more

Better to ask first...
Thanks

atzebmw · 03-25-2019, 04:10 AM

Bimmercode or E-Sys never comes close to the data for the tuning.
These data are deeper in the system.
So, yes it is safe to code with bimmercode.

Johny212 · 03-25-2019, 04:28 AM

Quote:

Originally Posted by atzebmw

Bimmercode or E-Sys never comes close to the data for the tuning.
These data are deeper in the system.
So, yes it is safe to code with bimmercode.

Thank you again for answer

03-25-2019, 03:23 AM	#1
Johny212 Private 9 Rep 73 Posts Drives: F30 Join Date: Oct 2018 Location: Europe iTrader: (0)	Is it save? Hello everyone, Is it safe to code with bimmercode if you have chipped F30? It will not reset a chip after coding? Every performed coding there is an reset of ECU... I know most of the changes its only function on/off but in expert mode you can do a little more Better to ask first... Thanks
	Appreciate 0 Tweet Quote

03-25-2019, 04:10 AM	#2
atzebmw Colonel 588 Rep 2,302 Posts Drives: Tesla Model 3 Join Date: May 2016 Location: Germany iTrader: (0)	Bimmercode or E-Sys never comes close to the data for the tuning. These data are deeper in the system. So, yes it is safe to code with bimmercode.
	Appreciate 0 Quote