03-30-2020, 06:42 PM | #1 |
Private First Class
26
Rep 179
Posts |
Re-painted my 624m rims
I had curb rash that I fixed a little while ago, but decided to give all four rims a paint job:
Products: https://www.amazon.com/Rust-Oleum-24...5611111&sr=8-2 https://www.amazon.com/dp/B07LFXGDWK...ing=UTF8&psc=1 https://www.amazon.com/Kleanstrip-De...5611499&sr=8-9 I'd also recommend a head lamp, it's great for seeing runs or a bad coat: https://www.amazon.com/Rechargeable-...5611250&sr=8-6 Taping up the silver parts was a real pain, the paint remover is the back up, just make sure you apply it with something like a qtip and spray water on it right after and wipe it down fast: Hit the inside as well: Final: |
04-04-2020, 04:56 PM | #3 |
Private First Class
26
Rep 179
Posts |
|
Appreciate
0
|
03-07-2021, 09:13 PM | #4 |
Captain
373
Rep 898
Posts
Drives: F32 428i Xdrive
Join Date: Aug 2020
Location: Texas
|
good sir I hope you can help me XD
I am doing the same with my wheels (Same 624's) and I need to know How did you tape over the machined bits? I am having such a hard time with it! |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|