[Ibo24]

If I use CODE, I get this error:

ExecutionID=2020/04/10-05:20:38.099
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[HU_NBT2 - 63] prepareECUforCoding started [PROGRESS]
[HU_NBT2 - 63] prepareECUforCoding finished [PROGRESS]
[HU_NBT2 - 63] authenticateECUforCoding started [PROGRESS]
[HU_NBT2 - 63] authenticateECUforCoding finished [PROGRESS]
[HU_NBT2 - 63 - cafd_00001ef6-006_031_016] Transaction type: cdDeploy; Message: TA started [TRANSACTION]
MCDDiagService<id=62649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUCoding, service=WDBI_PLAIN - WriteDataByIdentifier with unlimited Data-ID (plain hex value), description=error: negative response : requestOutOfRange, link=HU_NBT2_63_ETHERNET> [DIAGSERVICE]
[] job failed with negative response error:
code: service returned global negative response
description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: HU_NBT2_63_ETHERNET
severity: ERROR
[THROWABLE]
[HU_NBT2 - 63 - cafd_00001ef6-006_031_016] Transaction type: cdDeploy; Message: TA finished [TRANSACTION]
[HU_NBT2 - 63] There was an error during TAL execution, please check the log files. [WARN]
[HU_NBT2 - 63] - [Exception - HU_NBT2 - 63] job failed with negative response error:
code: service returned global negative response
description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: HU_NBT2_63_ETHERNET
severity: ERROR

[HU_NBT2 - 63] finalizeECUCoding started [PROGRESS]
[HU_NBT2 - 63] finalizeECUCoding finished [PROGRESS]
[] There was an error, please check the log files. [WARN]
[] - [Exception - HU_NBT2 - 63] job failed with negative response error:
code: service returned global negative response
description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: HU_NBT2_63_ETHERNET
severity: ERROR

[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "15s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.
Abarbeitung beendeten

[shawnsheridan]

Originally Posted by Ibo24

If I use CODE, I get this error:

When you read ECU, does it show VIN in brackets or [yyyyyyy]?

[Ibo24]

Yyyyyyy yes.

[shawnsheridan]

Originally Posted by Ibo24

Yyyyyyy yes.

Bingo! NBT2 VIN is corrupt. Need to try and Write VIN to it:

E-Sys => Expert Mode => FSC Extended=> WriteDataByIdentifierVIN = xxxxxCARxVINxxxxx.

Then try CAFD Injection / VO Coding again.

[Ibo24]

What is the following:
Diagnostic Adress (Hex)
Base Variant
Application Number
Upgrade Index

[shawnsheridan]

Originally Posted by Ibo24

What is the following:
Diagnostic Adress (Hex)
Base Variant
Application Number
Upgrade Index

Not needed for WriteDataByIdentifierVIN.

[Ibo24]

When trying to add WriteDataByIdentifierVin

Do I only need to give the full vin or do I need to add xxxxxvinxxxxx (the X's)

[shawnsheridan]

Originally Posted by Ibo24

When trying to add WriteDataByIdentifierVin

Do I only need to give the full vin or do I need to add xxxxxvinxxxxx (the X's)

The Full 17 Digit VIN.

[Ibo24]

ExecutionID=2020/04/10-06:03:26.219
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[HU_NBT2 - 63] prepareECUforCoding started [PROGRESS]
[HU_NBT2 - 63] prepareECUforCoding finished [PROGRESS]
[HU_NBT2 - 63] authenticateECUforCoding started [PROGRESS]
[HU_NBT2 - 63] authenticateECUforCoding finished [PROGRESS]
[HU_NBT2 - 63 - cafd_00001ef6-006_031_016] Transaction type: cdDeploy; Message: TA started [TRANSACTION]
MCDDiagService<id=62649, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUCoding, service=WDBI_PLAIN - WriteDataByIdentifier with unlimited Data-ID (plain hex value), description=error: negative response : requestOutOfRange, link=HU_NBT2_63_ETHERNET> [DIAGSERVICE]
[] job failed with negative response error:
code: service returned global negative response
description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: HU_NBT2_63_ETHERNET
severity: ERROR
[THROWABLE]
[HU_NBT2 - 63 - cafd_00001ef6-006_031_016] Transaction type: cdDeploy; Message: TA finished [TRANSACTION]
[HU_NBT2 - 63] There was an error during TAL execution, please check the log files. [WARN]
[HU_NBT2 - 63] - [Exception - HU_NBT2 - 63] job failed with negative response error:
code: service returned global negative response
description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: HU_NBT2_63_ETHERNET
severity: ERROR

[HU_NBT2 - 63] finalizeECUCoding started [PROGRESS]
[HU_NBT2 - 63] finalizeECUCoding finished [PROGRESS]
[] There was an error, please check the log files. [WARN]
[] - [Exception - HU_NBT2 - 63] job failed with negative response error:
code: service returned global negative response
description: Service WDBI_PLAIN returned a negative response with response code requestOutOfRange; LinkName: HU_NBT2_63_ETHERNET
severity: ERROR

[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "16s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.
Abarbeitung beendet

So what I did now:
Went to FSC Extend, clicked on WriteDataByIdentifierVin -> popped a box up, gave the VIN, pressed OK, went to Coding and clicked on HU_NBT2 and clicked on CODE.

This was the error code.

[shawnsheridan]

Originally Posted by Ibo24

So what I did now:
Went to FSC Extend, clicked on WriteDataByIdentifierVin -> popped a box up, gave the VIN, pressed OK, went to Coding and clicked on HU_NBT2 and clicked on CODE.

This was the error code.

Its messed up. It is locked. Need to Write VIN, then you need apply VO Coding Unlock, and then Inject CAFD and VO Code it.

[Ibo24]

Okay, where do I write vin to?

[shawnsheridan]

Originally Posted by Ibo24

Okay, where do I write vin to?

WriteDataByIdentifierVin as already explained.

[xpro]

If someone was interested, this was my DIY 1600W Dell PSU rated at 100AMPs and adjustable from 12-15V. Really easy to modify providing you have cables and a few electronic items and all in less then 100$

[jalami]

interesting DIY?

[xpro]

Originally Posted by jalami

interesting DIY?

Yes, DIY!

100AMP continuous and max delivered 130Amp capable. Old Dell server . A lot more powerful then then whats available on the market for automotive use and not to mention a fraction of a price!

I've never seen a unit that runs as smooth. When tou set the voltage, no matter what the load is, the unit maintains it with easy.

[xpro]

Just noticed today that my HDD is no longer available post flash?

Is this normal? I used to have some tunes saved, but I can no longer access it?

Does ilevel update wipe the HDD aswell?

thanks

[xpro]

Originally Posted by xpro

Just noticed today that my HDD is no longer available post flash?

Is this normal? I used to have some tunes saved, but I can no longer access it?

Does ilevel update wipe the HDD aswell?

thanks

@shawnsheeridan


Would you know what is the problem?

The HDD is not visible at all and I can no longer save nor access music that was on it?

The flash was successful and everything works as expected?

Thanks

[shawnsheridan]

Originally Posted by xpro

@shawnsheeridan


Would you know what is the problem?

The HDD is not visible at all and I can no longer save nor access music that was on it?

The flash was successful and everything works as expected?

Thanks

No, not normal. Can you still copy music to HDD?

[xpro]

Originally Posted by shawnsheridan

No, not normal. Can you still copy music to HDD?

Thats the problem, I cant.

Everything else is working just fine, the nav, CP, etc?

Would this be a coding issue maybe?

Thanks

[xpro]

Ok problem fixed.

I VO coded NBT to default and HDD is now working

Thanks alot

[shawnsheridan]

Originally Posted by xpro

Ok problem fixed.

I VO coded NBT to default and HDD is now working

Thanks alot

[Gary Catlin]

When I try this solution I get

--> WriteDataByIdentifierVIN
<-- Error: Please enter a Diagnostic Address and a Base Variant first. [G098]

Im pressing the start button