[kern417]

yeah with those tire sizes id bet you could go lower.

[CLEsonny]

Originally Posted by Dubsteporstfu

That’s what I was thinking and spacers will prevent the car from airing out lol

This guy is running those specs

[Luismpr]

Originally Posted by d1mitrov

Some awesome pics in here guys! I just got my 2014 335i and was looking at a set of 19x9.5 +35 front and 19x11 +45 rear. What do you guys think? A little bit of stretch, dropped on coils and fender roll? Should be able to work without a problem from what ive seen in this thread.
Also whats your guys' opinion on having wheels professionally re drilled at a shop to fit our bolt pattern? Any have any experience with this?

Im running 19x10 +14 front and 19x11 +26 rear. Fronts are fine but I’m running stretched tire and camber plates at 3degrees in the front on xdrive. The rear does not fit at all and I’m having to run 5 degrees camber rear. There’s a website called willtheyfit where you can put your current specs and the new specs and it will tell you how much it sticks out and whatnot. Used that site to dial in my specs. Also not running any spacers and have fender to lip Fitment all around aired out (if that’s your style)


Check out my IG luisborii

[d1mitrov]

Originally Posted by Luismpr

Im running 19x10 +14 front and 19x11 +26 rear. Fronts are fine but I’m running stretched tire and camber plates at 3degrees in the front on xdrive. The rear does not fit at all and I’m having to run 5 degrees camber rear. There’s a website called willtheyfit where you can put your current specs and the new specs and it will tell you how much it sticks out and whatnot. Used that site to dial in my specs. Also not running any spacers and have fender to lip Fitment all around aired out (if that’s your style)


Check out my IG luisborii

just checked it out fitment is dope. Remind me of my is350 fitment. What tire sizes are you running on this set up? I actually went with a set of 19x9.5 +22 and 19x10.5 +25. Im hoping to make it work without too much camber.

[DThr33]

Not as slammed/stanced as a lot of the cars here but I feel it's good enough

[kern417]

[Bfifty8]

Anyone have an idea if 19x10 et35 will rub in the rear with 275/30 ventus v12?
Had 19x10 et40, 437m and didnt rub but is the 5 mm going to rub like crazy? Lowered on H&R Super sports

[d1mitrov]

Damn yall are getting specific with the fitment questions!
Id like to know will a 275 tire with 3.5psi rub, if i have two fat girls in the back seat and i drive up a 30 degree driveway and my coils stiffness is set to 5?!?!

[spirit3d88]

Originally Posted by GetYourWheels

Heres a set of M510s in Matte Antique Bronze I ran in the same fitment above





Rear is a tad aggressive at 20x10 +38, I stretched a 255 since I'm pretty low.
Ideally you want to run 20x10 +42 to +45 for flush fit with a full 275 tire, you can get the higher offsets by going with a Bespoke setup with custom offsets

Hello, I'm looking for a configuration with this type of tires in 19 ", with 225/40/19 8.5J front and 255/35/19 9.5J behind, that ET advised me to stay aligned with the fins.

A greeting!

[d1mitrov]

Here she is after much research, turned out just the way i wanted! Might have to raise it up a bit tho, that front lip is waay too low!

20190124_175504 by d1mitrov, on Flickr

20190124_181211 by d1mitrov, on Flickr

20190124_181644 by d1mitrov, on Flickr

[stickman1309]

Originally Posted by d1mitrov

Here she is after much research, turned out just the way i wanted! Might have to raise it up a bit tho, that front lip is waay too low!

20190124_175504 by d1mitrov, on Flickr

20190124_181211 by d1mitrov, on Flickr

20190124_181644 by d1mitrov, on Flickr

Originally Posted by d1mitrov

Here she is after much research, turned out just the way i wanted! Might have to raise it up a bit tho, that front lip is waay too low!

[img]https://farm8.staticflickr.com/7869/...5faa6d1d_b.jpg[/img]20190124_175504 by d1mitrov, on Flickr

[img]https://farm8.staticflickr.com/7874/...0a866ba2_b.jpg[/img]20190124_181211 by d1mitrov, on Flickr

[img]https://farm5.staticflickr.com/4832/...9a2b33a9_b.jpg[/img]20190124_181644 by d1mitrov, on Flickr

Can you lower the rear anymore to match the fronts a bit better? But it looks really good

[5mall5nail5]

Originally Posted by d1mitrov

Here she is after much research, turned out just the way i wanted! Might have to raise it up a bit tho, that front lip is waay too low!

20190124_175504 by d1mitrov, on Flickr

20190124_181211 by d1mitrov, on Flickr

20190124_181644 by d1mitrov, on Flickr

Awesome! What suspension?

[lfepro.g]

Originally Posted by d1mitrov

Here she is after much research, turned out just the way i wanted! Might have to raise it up a bit tho, that front lip is waay too low!

20190124_175504 by d1mitrov, on Flickr

20190124_181211 by d1mitrov, on Flickr

20190124_181644 by d1mitrov, on Flickr

Damn! Hope to see this beauty at a Tampa bimmer club meet

[d1mitrov]

Originally Posted by stickman1309

Can you lower the rear anymore to match the fronts a bit better? But it looks really good

thanks, the distance between fender and wheel in both front and back is actually the same but the rear of the F30 sits higher naturally.

Originally Posted by 5mall5nail5

Awesome! What suspension?

thanks, its on bc racing coilovers

Originally Posted by lfepro.g

Damn! Hope to see this beauty at a Tampa bimmer club meet

Haha yea man im looking forward to making out there one of these days!

[jrp73]

Originally Posted by KendrickOak

Completed and captured
20x9.5
20x10.5

hey man, what offsets are these?

[KendrickOak]

Originally Posted by jamespheely

hey man, what offsets are these?

+18 +22

[KendrickOak]

Angry face

[kern417]

[Vursce]

Originally Posted by stickman1309

Also, took out the rear coilover rings, for maximum low

X drive or no

[Vursce]

Originally Posted by Malloy

Not stanced, but pretty low and well fit. -2.1F, -2.7R.

OG TE37 18x9.5 et28, PSS 255/40/18 square.

Rad got more pics from side front side rear ?

[Vursce]

Is it fine to run 18x9.5 245/40/18 squared on x drive ive done it before for a bit no problem just wanted to know if thts fine with x drive I thought is long as ur tires are squared ur fine my whole wheels and tire setup is squared! Just wanted to know before i put my new camber plates on and make it permanent

[stickman1309]

Originally Posted by Vursce

X drive or no

Originally Posted by Vursce

X drive or no

Non X drive 👍🏻