02-04-2023, 08:35 PM | #1 |
New Member
0
Rep 5
Posts |
Hi guys, i was trying to create a new key/fob for my 2014 320I using XTool D7. When the scan tool was connected to the car, according to a tutorial i was reading, they mentioned that after reading the original key information, we have to upgrade FEM/BDC. When i did that, a message saying updating system appeared, during the process the car turned off the lights and started giving error messages on the dash. after the upgrade was completed, i got a fail message and the car does not turn on/off any more, doors doesnt work, key is not working ... how this can be fixed or restore the car to original setting?
Thanks, |
02-05-2023, 06:09 AM | #3 |
New Member
0
Rep 5
Posts |
Hi, I am not sure to to test if FEM is responding. I can still diagnose the car and it throws a bunch or errors. Key is not working, car won’t start, lights are off, windows are not working…. The radio and navigation works.
I never used e-SYS before, any particular steps you recommend? Thanks, |
Appreciate
0
|
02-05-2023, 06:41 AM | #4 |
Banned
578
Rep 2,047
Posts |
https://f30.bimmerpost.com/forums/sh...72&postcount=1
If you have Enet cable i can help you remotely. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|