Coding cable and ESYS, psdzdata

TMD29 · 04-03-2015, 06:15 PM

Shawn,
Can you send me the link for I-Step 15-03-502 psdzdata and E-Sys version 3.24.3 or 3.25.3 ? I know it's trimmed, but my car was recently updated.
Thanks!

shawnsheridan · 04-03-2015, 10:46 PM

Quote:

Originally Posted by TMD29

Shawn,
Can you send me the link for I-Step 15-03-502 psdzdata and E-Sys version 3.24.3 or 3.25.3 ? I know it's trimmed, but my car was recently updated.
Thanks!

PM sent.

Moisted · 04-07-2015, 06:23 PM

Aaaahhh... HELP

I was coding away happily, but at the last step somehow I managed to write all modules back into ECU, not just the one I was editing.

Now I'm getting a "Drivetrain Malfunction" and "Fuel-line error" messages when I turn engine on

I tried resetting, but the messages don't go away.

Please help...

shawnsheridan · 04-07-2015, 08:51 PM

Quote:

Originally Posted by Moisted

Aaaahhh... HELP

I was coding away happily, but at the last step somehow I managed to write all modules back into ECU, not just the one I was editing.

Now I'm getting a "Drivetrain Malfunction" and "Fuel-line error" messages when I turn engine on

I tried resetting, but the messages don't go away.

Please help...

I replied to your PM.

kabamaru · 04-08-2015, 08:42 AM

Hi Shawn, i have an f20 MY 2013 and in a few days i will retrofit the nbt system. Already bought the enet cable. Could you send me all the software needed for my car to start coding? Also a manual or tutorial with step by step guides on how the e-sys works would be nice, i am a complete noob. Thank you for your help and time you spend for all of us

shawnsheridan · 04-08-2015, 09:14 AM

Quote:

Originally Posted by kabamaru

Hi Shawn, i have an f20 MY 2013 and in a few days i will retrofit the nbt system. Already bought the enet cable. Could you send me all the software needed for my car to start coding? Also a manual or tutorial with step by step guides on how the e-sys works would be nice, i am a complete noob. Thank you for your help and time you spend for all of us

PM sent.

TH15BMW · 04-09-2015, 11:00 AM

Shawn how can i send you a few quid for a beer!!!! You are a legend...

Ps can you advise me what i need to code my 2015 f31

shawnsheridan · 04-09-2015, 01:24 PM

Quote:

Originally Posted by TH15BMW

Shawn how can i send you a few quid for a beer!!!! You are a legend...

Ps can you advise me what i need to code my 2015 f31

PM sent.

tallshortguy · 04-09-2015, 02:04 PM

Shawn would you mind sending me the software as well?

Thanks!

shawnsheridan · 04-09-2015, 02:38 PM

Quote:

Originally Posted by tallshortguy

Shawn would you mind sending me the software as well?

Thanks!

PM sent.

azents · 04-11-2015, 08:49 AM

Shawn would you mind sending me the software as well? I have f31 with F020-15-03-502 and I can't code anymore.

Thanks!

shawnsheridan · 04-11-2015, 08:51 AM

Quote:

Originally Posted by azents

Shawn would you mind sending me the software as well? I have f31 with F020-15-03-502 and I can't code anymore.

Thanks!

PM sent.

r0ckypil0t · 04-12-2015, 05:14 AM

Hi Shawn

My car is going in for its first service and I know they are going to update the NAV (have 02/14 F31) to the latest version.

Would you please send me the links for the latest software downloads please.

Thank you

shawnsheridan · 04-12-2015, 05:16 AM

Quote:

Originally Posted by r0ckypil0t

Hi Shawn

My car is going in for its first service and I know they are going to update the NAV (have 02/14 F31) to the latest version.

Would you please send me the links for the latest software downloads please.

Thank you

PM sent.

r0ckypil0t · 04-12-2015, 05:47 AM

Quote:

Originally Posted by shawnsheridan

PM sent.

Thank you!

CharlieVu · 04-12-2015, 02:13 PM

Thanks Shawn for all the help!!

I just went on a 45 minute coding frenzy. Coded off day time running lights / led, coded foglights to turn on when unlocking, coded foglights to turn on when turning left or right, (directional), turned on keyfob to unlock windows and open windows when holding on unlock/lock. Coded mirrors to close when I lock the car and open when I unlock the car

I'm loving this

ilovemye93 · 04-12-2015, 03:05 PM

I'm getting this error when trying to read KOMBI. I have no problem reading any other ECUs.

Transaktions-Report: Aktion: Codierdaten lesen

KOMBI [60] [F774093]
readCPS o.k.
CAFD_000009C8_006_000_030 Fehler:
NCD read from ECU "ECUId:KOMBI_0x60" for CAF "cafd_000009c8-006_000_030" failed! [C069]
Error processing XML data [1660]

Can anyone please tell me what I'm doing wrong?

shawnsheridan · 04-12-2015, 07:17 PM

Quote:

Originally Posted by ilovemye93

I'm getting this error when trying to read KOMBI. I have no problem reading any other ECUs.

Transaktions-Report: Aktion: Codierdaten lesen

KOMBI [60] [F774093]
readCPS o.k.
CAFD_000009C8_006_000_030 Fehler:
NCD read from ECU "ECUId:KOMBI_0x60" for CAF "cafd_000009c8-006_000_030" failed! [C069]
Error processing XML data [1660]

Can anyone please tell me what I'm doing wrong?

Nothing. cafd_000009c8.caf.006_000_030 is known to be corrupt. You must inject cafd_000009c8.caf.006_000_031 and VO Code Kombi, then you can FDL Code it.

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on KOMBI ECU => Click on "Detect CAF for SWE" => Select cafd_000009c8.caf.006_000_031 from any I-Level shown => Select OK => Right-Click on ECU (the ECU itself not the underlying CAFD) => Select CODE

ilovemye93 · 04-12-2015, 08:25 PM

Quote:

Originally Posted by shawnsheridan

Nothing. cafd_000009c8.caf.006_000_030 is known to be corrupt. You must inject cafd_000009c8.caf.006_000_031 and VO Code Kombi, then you can FDL Code it.

Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on KOMBI ECU => Click on "Detect CAF for SWE" => Select cafd_000009c8.caf.006_000_031 from any I-Level shown => Select OK => Right-Click on ECU (the ECU itself not the underlying CAFD) => Select CODE

I will give it a try. Thank you very much for your help Shawn.

bmwradin · 04-13-2015, 03:40 AM

Hi Shawn,

My car's an F31 from Sept 2013. The car's software has been updated by the dealer early Jan 2015, but I'm not sure (yet) which data version they used. I ordered a cable which will arrive any moment.

Can you please PM me the links to the E-Sys software and both the latest PSDZData (55.x) as well as the 54.1 data?

Thanks!

shawnsheridan · 04-13-2015, 05:35 AM

Quote:

Originally Posted by bmwradin

Hi Shawn,

My car's an F31 from Sept 2013. The car's software has been updated by the dealer early Jan 2015, but I'm not sure (yet) which data version they used. I ordered a cable which will arrive any moment.

Can you please PM me the links to the E-Sys software and both the latest PSDZData (55.x) as well as the 54.1 data?

Thanks!

PM sent.

squidlyboy · 04-13-2015, 07:19 AM

I added (swapped) a new REM to my F30 and injected a new CAFD for it. I used the Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on REM ECU => Click on Detect CAF for SWE => Select the new CAFD from my I-Level => Select OK => Right-Click on ECU (the ECU itself not the underlying CAFD) => Select CODE

I did it to get rid of a 'Trunk Open' warning on the dash that wouldn't go away. Everything worked, but I was curious about two things:

1) How does E-Sys know what the new hardware is? In the above procedure I had always thought that E-Sys is just reading generic VO option data from a config file and everything is just default data for a standard F30 with my original options. I mean, you even have to manually pick the CAFD file based on your I-Level. So at what point in that procedure does it determine (i.e. probe H/W or read the actual ECU) a new REM has been put in its place?

2) What does it mean when the ECU is colored blue/red below? I believe that showed up right after i selected the new CAFD for my I-Level but just before i clicked on CODE.

04-03-2015, 06:15 PM	#287
TMD29 Don't care 117 Rep 224 Posts Drives: 17 SO M3 ZCP Join Date: Aug 2014 Location: Ohio iTrader: (0)	Shawn, Can you send me the link for I-Step 15-03-502 psdzdata and E-Sys version 3.24.3 or 3.25.3 ? I know it's trimmed, but my car was recently updated. Thanks! Last edited by TMD29; 04-03-2015 at 06:22 PM..
	Appreciate 0 Quote

04-07-2015, 06:23 PM	#289
Moisted Private 20 Rep 90 Posts Drives: 2015 335i F36 GranCoupe EBII Join Date: Feb 2012 Location: Ottawa, Canada iTrader: (0)	Aaaahhh... HELP I was coding away happily, but at the last step somehow I managed to write all modules back into ECU, not just the one I was editing. Now I'm getting a "Drivetrain Malfunction" and "Fuel-line error" messages when I turn engine on I tried resetting, but the messages don't go away. Please help... __________________ 2015 435i GranCoupe F36 Xdrive PPK Estoril Blue II Ivory/black
	Appreciate 0 Quote

04-08-2015, 08:42 AM	#291
kabamaru Enlisted Member 2 Rep 34 Posts Drives: f20 ed Join Date: Mar 2015 Location: Greece iTrader: (0)	Hi Shawn, i have an f20 MY 2013 and in a few days i will retrofit the nbt system. Already bought the enet cable. Could you send me all the software needed for my car to start coding? Also a manual or tutorial with step by step guides on how the e-sys works would be nice, i am a complete noob. Thank you for your help and time you spend for all of us
	Appreciate 0 Quote

04-09-2015, 11:00 AM	#293
TH15BMW Second Lieutenant 37 Rep 243 Posts Drives: BMW 3 Series 320d Lux Touring Join Date: Jan 2015 Location: United Kingdom iTrader: (0)	Shawn how can i send you a few quid for a beer!!!! You are a legend... Ps can you advise me what i need to code my 2015 f31
	Appreciate 0 Quote

04-09-2015, 02:04 PM	#295
tallshortguy First Lieutenant 64 Rep 386 Posts Drives: F30 328i Join Date: Jan 2014 Location: US iTrader: (0)	Shawn would you mind sending me the software as well? Thanks!
	Appreciate 0 Quote

04-11-2015, 08:49 AM	#297
azents Registered 0 Rep 2 Posts Drives: f31 Join Date: Apr 2015 Location: Tokyo iTrader: (0)	Shawn would you mind sending me the software as well? I have f31 with F020-15-03-502 and I can't code anymore. Thanks!
	Appreciate 0 Quote

04-12-2015, 05:14 AM	#299
r0ckypil0t Private 32 Rep 88 Posts Drives: X3MC - 2022??? Join Date: Mar 2014 Location: Edinburgh iTrader: (0)	Another request... Hi Shawn My car is going in for its first service and I know they are going to update the NAV (have 02/14 F31) to the latest version. Would you please send me the links for the latest software downloads please. Thank you __________________ F97 Brooklyn Grey X3M Comp /// In Transit... "Rules are for the obedience of fools and for the guidance of wise men..." Douglas Bader
	Appreciate 0 Quote

04-12-2015, 02:13 PM	#302
CharlieVu Second Lieutenant 48 Rep 241 Posts Drives: 2013 328i x-drive Melbourn RED Join Date: Feb 2015 Location: Denver iTrader: (0)	Thanks Shawn for all the help!! I just went on a 45 minute coding frenzy. Coded off day time running lights / led, coded foglights to turn on when unlocking, coded foglights to turn on when turning left or right, (directional), turned on keyfob to unlock windows and open windows when holding on unlock/lock. Coded mirrors to close when I lock the car and open when I unlock the car I'm loving this __________________ Charlie Vu 2013 328iX Melb RED- JB4 - AFE 5R Intake - B14 Bilstein - Morimoto H1 Projectors and LED Angel eyes- Morimoto HD Elite 50w 5500k H.I.D.
	Appreciate 0 Quote

04-12-2015, 03:05 PM	#303
ilovemye93 Private 2 Rep 50 Posts Drives: F32 435i Join Date: Sep 2010 Location: Vancouver iTrader: (4)	I'm getting this error when trying to read KOMBI. I have no problem reading any other ECUs. Transaktions-Report: Aktion: Codierdaten lesen KOMBI [60] [F774093] readCPS o.k. CAFD_000009C8_006_000_030 Fehler: NCD read from ECU "ECUId:KOMBI_0x60" for CAF "cafd_000009c8-006_000_030" failed! [C069] Error processing XML data [1660] Can anyone please tell me what I'm doing wrong?
	Appreciate 0 Quote

04-13-2015, 03:40 AM	#306
bmwradin Registered 0 Rep 1 Posts Drives: F31 Join Date: Apr 2015 Location: Europe iTrader: (0)	Hi Shawn, My car's an F31 from Sept 2013. The car's software has been updated by the dealer early Jan 2015, but I'm not sure (yet) which data version they used. I ordered a cable which will arrive any moment. Can you please PM me the links to the E-Sys software and both the latest PSDZData (55.x) as well as the 54.1 data? Thanks!
	Appreciate 0 Quote

04-13-2015, 07:19 AM	#308
squidlyboy Major 568 Rep 1,035 Posts Drives: 2014 Alpine White 328i M-Sport Join Date: Jul 2014 Location: Chandler, Arizona iTrader: (0)	I added (swapped) a new REM to my F30 and injected a new CAFD for it. I used the Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on REM ECU => Click on Detect CAF for SWE => Select the new CAFD from my I-Level => Select OK => Right-Click on ECU (the ECU itself not the underlying CAFD) => Select CODE I did it to get rid of a 'Trunk Open' warning on the dash that wouldn't go away. Everything worked, but I was curious about two things: 1) How does E-Sys know what the new hardware is? In the above procedure I had always thought that E-Sys is just reading generic VO option data from a config file and everything is just default data for a standard F30 with my original options. I mean, you even have to manually pick the CAFD file based on your I-Level. So at what point in that procedure does it determine (i.e. probe H/W or read the actual ECU) a new REM has been put in its place? 2) What does it mean when the ECU is colored blue/red below? I believe that showed up right after i selected the new CAFD for my I-Level but just before i clicked on CODE. Attached Images
	Appreciate 0 Quote