07-16-2020, 02:21 PM | #1 |
Enlisted Member
7
Rep 43
Posts |
335 exhaust on 328
Has anyone tried fitting a 335i M performance exhaust on a 328 that doesn't have the sport rear bumper? If so how did you guys do it.. any kits or diffusers that can fit on the stock rear bumper?
|
07-16-2020, 02:34 PM | #2 |
Major
467
Rep 1,055
Posts |
It'll fit if you cut the bumper or swap the diffuser for a dual one non m sport.
__________________
MY13: TTE400 Stage 2 turbo, Spec Single Mass flywheel + Stage 3+ Clutch, FTP V2 Turbo Inlet, Evolution Racewerks Charge pipe + Boost pipe + Intercooler, Turbosmart Recirculating Diverter Valve, aFE grill scoop + aFE Magnum Force Cold Air Intake, B58 coil retrofit, eBay Downpipe, Active Autowerke muffler, DW400 LPFP, B58TU HPFP, M5 s63TU injectors, Bimmermilvs, e80 tune by Navardi Tuned. 380 whp/360 wheel torque stock block
|
Appreciate
0
|
07-16-2020, 02:49 PM | #3 |
Enlisted Member
7
Rep 43
Posts |
Okay thank you! I know when I was looking around everyone is saying its not possible without the M rear bumper but that didn't sound right so I wanted to see if anyone else did it without the M rear Bumper
|
Appreciate
0
|
07-16-2020, 03:01 PM | #4 |
Major
467
Rep 1,055
Posts |
Same luxury bumper on a 335i that your 328 should have. It's just cut to fit the dual exhaust.
__________________
MY13: TTE400 Stage 2 turbo, Spec Single Mass flywheel + Stage 3+ Clutch, FTP V2 Turbo Inlet, Evolution Racewerks Charge pipe + Boost pipe + Intercooler, Turbosmart Recirculating Diverter Valve, aFE grill scoop + aFE Magnum Force Cold Air Intake, B58 coil retrofit, eBay Downpipe, Active Autowerke muffler, DW400 LPFP, B58TU HPFP, M5 s63TU injectors, Bimmermilvs, e80 tune by Navardi Tuned. 380 whp/360 wheel torque stock block
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
328-335 exhaust, exhaust, question |
|
|