[KTE]

So a few bits of detail that could be at cause here:

- This screen was previously fitted and removed for warranty work.
- ‘System’ was updated, I’m guessing this is the I-Step as I couldn’t read data from the CAFD
- Downloaded psdsData 4.17.20, can now read CAFD and edit.
- After activating FA and coding the FDL changes (can confirm the iDrive reboots as radio cuts out) it just reverts to the default settings! (I’m not clicking on the entire tree, only the CAFD). Success window pops up
- 8.8" Screen is connected but does not show 'no signal' or anything on the screen.

Esys 2.7.1 with the script that ‘tricks’ based on date.

Any thoughts? Really can’t be asked to grab the original smaller screen and get that annoying cable unplugged.


—-EDIT: Got given a heads up, basically being a bit slow, and jogging memory from half a year..

Was coding to original spec based on SVT, wasn’t clicking Code FDL!

Can be DELETED.

[atzebmw]

Originally Posted by KTE

- After activating FA and coding the FDL changes (can confirm the iDrive reboots as radio cuts out) it just reverts to the default settings! (I’m not clicking on the entire tree, only the CAFD).

Do you hit the button „Code“ or „FDL code“?

Edit. OK, Problem solved.