[veyslaurens]

Originally Posted by atzebmw

No problem.
I also find that interesting and learn something new in the process.

So i tested again.
I think i have now the same files like you.
E-Sys 3.27, psdzdata 4.01.22 Full and your SVT_IST and FA.
And again it worked for me.
So i have to ask, did you really load my edited FA?

But we can now try another thing.
Because it worked for me i could create the SVT_SOLL and SVT_TAL.
You now can skip the calculation and directly start the TAL processing if you load the SVT_SOLL and SVT_TAL.
Then only choose the REM and maybe it will work.
I also never did it that way but i think it can work.

Success!!!
It finally worked. Previously I was still using the 4.03.30 version but after switching to the 4.01.22 I was able to make a calculation and proceed to flash my REM. After 5 minutes of intense sweating and a host of errors (I know this is to be expected, but still scary tho) the flash was complete.
I then VO coded the REM with "HELC" and there were my inner blinkers!!
Thank you so much for all the help and the patience.
I think I'm done retrofitting stuf now
kind regards
Laurens