11-19-2021, 01:04 PM | #1 |
Cheapskate
4522
Rep 5,003
Posts |
B58 Wastegate Calibration DIY
Quick DIY for anyone that needs it. This will help fix pretty much any code related to the wastegate stop position (open or closed). Hope this helps.
|
05-14-2024, 12:47 PM | #3 |
Registered
3
Rep 2
Posts |
I know this is a really old thread. Just want to post an update. If you having a wastegate problem, if you log the raw position at idle it will be possible to see whether the rod needs to be shortened on length-end. Ideally you want the raw position at 0mm on idle with the wgdc at 100%(fully closed).
Hope this helps someone. |
Appreciate
2
kern4174522.00 alpinweiss34088.00 |
Post Reply |
Bookmarks |
|
|