[schwarzrb]

Originally Posted by shawnsheridan

I had you inject new CAFD in your FEM_BODY, because you corrupted yours.

For resetting BMW Assist, I told you to simply VO Code the Head Unit and Combox by right-clicking on the ECU (not the CAFD), and selecting code. So why are you trying to retrieve and replace their CAFD's?

Shawn, I did some coding (Fembody, HU_CIC, HU_NBT) a couple months ago with success. However, I just tried to use my SOS button to set up with BMW and it does not work. Do you think I could have somehow disabled it during my coding?

[shawnsheridan]

Originally Posted by ResetElonex

Shawn,

Could you please PM me the links to the latest E-Sys, psdzdata and token?

Originally Posted by shawnsheridan

You need to post an email address or wait until you can receive PM's.

Times up. PM sent.

[shawnsheridan]

Originally Posted by schwarzrb

Shawn, I did some coding (Fembody, HU_CIC, HU_NBT) a couple months ago with success. However, I just tried to use my SOS button to set up with BMW and it does not work. Do you think I could have somehow disabled it during my coding?

Anything is possible, but it seems unlikely. Was the Button ever working?

The first thing I would do is call BMW Assist and give them your VIN / Account Number, and have them verify everything is correct on their side.

[schwarzrb]

Originally Posted by shawnsheridan

Anything is possible, but it seems unlikely. Was the Button ever working?

The first thing I would do is call BMW Assist and give them your VIN / Account Number, and have them verify everything is correct on their side.

Hindsight is 20/20....never checked between picking car up and coding. Will check with BMW. thanks!

[avantix]

Anyone know what needs to be changed/coded to have the voice response with a British accent?

[cailas]

I'm from Europe, before one week bought F30 in usa. I want to know, it's possible to code everything from USA standarts to EUR like farenheits to celsius, mph to kmh and other things?

[shawnsheridan]

Originally Posted by ResetElonex

I just got my F31 company car and I'm completely new at this. So before buying a token and pin, I would like to test how this works and what I can change.

Is there anyone willing to share me his token? If so, please PM me.

If you get someone to give you their patch / token for "testing" purposes, more power to you.

However, I just don't follow the logic of your appeal.

Since it is proven to work, and what you can change is well documented, there is nothing to "test".

[Den_mgn]

Please help !
I want to update the NBT with preserving the original VIN.
Enjoyed here this instruction.
Go to Comfort Mode => TAL-Calculating
- Read and Save FA
- Activate FA
- Read and Save SVT Actual as SVT_ist
- Create an SVT Target
Under KIS / SVT Target Calculation Strategy, select Complete Flash
Select I-Step (shipm.) to match your original I-Level as read and shown in VCM I-Step (Shipment)
I-Step (target.) will be unselectable as it is fixed based on current PSdZData I-Level
Do a KIS / SVT Target Calculation and Save as SVT_soll
- Do a TAL Calculation and Save as SVT_tal

Go to Expert Mode => TAL-Processing
Load TAL (SVT_tal)
Load SVT Target (SVT_soll)
Select "Read FA" button.

On ECU Tab, uncheck let top box in column "All" (All checked boxes should toggle to unchecked)
On ID Base Row for HU_NBT, make check boxes in blFlash, swDeploy, cdDeploy, and ibaDeploy columns.
Press Check software availability
Press Start and it will proceed with processing TAL to flash HU_NBT with new firmware.

But that's got this error:

[shawnsheridan]

Originally Posted by Den_mgn

Please help !
I want to update the NBT with preserving the original VIN.
Enjoyed here this instruction.
Go to Comfort Mode => TAL-Calculating
- Read and Save FA
- Activate FA
- Read and Save SVT Actual as SVT_ist
- Create an SVT Target
Under KIS / SVT Target Calculation Strategy, select Complete Flash
Select I-Step (shipm.) to match your original I-Level as read and shown in VCM I-Step (Shipment)
I-Step (target.) will be unselectable as it is fixed based on current PSdZData I-Level
Do a KIS / SVT Target Calculation and Save as SVT_soll
- Do a TAL Calculation and Save as SVT_tal

Go to Expert Mode => TAL-Processing
Load TAL (SVT_tal)
Load SVT Target (SVT_soll)
Select "Read FA" button.

On ECU Tab, uncheck let top box in column "All" (All checked boxes should toggle to unchecked)
On ID Base Row for HU_NBT, make check boxes in blFlash, swDeploy, cdDeploy, and ibaDeploy columns.
Press Check software availability
Press Start and it will proceed with processing TAL to flash HU_NBT with new firmware.

But that's got this error:
...

Yes, those are my instructions.

When you say you want to preserve the VIN, I assume this is a retofitted NBT Head Unit, and you are trying to keep the original Donor VIN in it which is different then the car VIN?

[Den_mgn]

Originally Posted by shawnsheridan

Yes, those are my instructions.

When you say you want to preserve the VIN, I assume this is a retofitted NBT Head Unit, and you are trying to keep the original Donor VIN in it which is different then the car VIN?

Yes.

[Koer]

Hi shawn,

Could you pm the links to the new versions of esys, psdzdata and such? Just got my car updated and i lost all my coding

[shawnsheridan]

Originally Posted by Den_mgn

Yes.

So, specify Donor VIN to be used during Flash, and Uncheck these boxes before flashing:

[shawnsheridan]

Originally Posted by Koer

Hi shawn,

Could you pm the links to the new versions of esys, psdzdata and such? Just got my car updated and i lost all my coding

Updated to what? What is your I-Step Current?

http://www.f30post.com/forums/showpo...postcount=1403

[Koer]

Originally Posted by shawnsheridan

Updated to what? What is your I-Step Current?

http://www.f30post.com/forums/showpo...postcount=1403

My current istep is F020-13-07-506

My last istep was F020-11-11-504

[Den_mgn]

Originally Posted by shawnsheridan

So, specify Donor VIN to be used during Flash, and Uncheck these boxes before flashing:

Attachment 937686

thank you so much!!!

[shawnsheridan]

Originally Posted by Koer

My current istep is F020-13-07-506

My last istep was F020-11-11-504

PM sent.

[Den_mgn]

Originally Posted by shawnsheridan

So, specify Donor VIN to be used during Flash, and Uncheck these boxes before flashing:

Attachment 937686

I got here this error in the logs

TAL execution started. [C205]
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
[Exception - UNKNOWN] FA must not be null when trying to execute a TAL containing coding transactions
Fatal error while executing tal!
Asynchrone programming failed! [C049]
FA must not be null when trying to execute a TAL containing coding transactions [1358] - SYSTEM_ERROR

[SimonB]

Hi Shawn,

I installed everything today, being E-Sys v3.23.4 and PSdZData 50.4, copied (and renamed) the patch files, copied the token into a new subdirectory and pointed E-Sys to the right file in the right directory, but when I click on 'Coding' in E-Sys, I get the following error:

EstCmDocumentCorruptException: Error during base64 decoding of EST token!
__________________________________________________ ___
com.bmw.esys.commons.exception.EsysException: An error occurred while processing the EST file "C:\ESysData\E-Sys EST\xxxxxxxx-esys.est". See details for more information. [C157]

Any ideas?

[shawnsheridan]

Originally Posted by Den_mgn

I got here this error in the logs

You must specify an FA to be used, and manually enter the Donor VIN like this:

[shawnsheridan]

Originally Posted by SimonB

Hi Shawn,

I installed everything today, being E-Sys v3.23.4 and PSdZData 50.4, copied (and renamed) the patch files, copied the token into a new subdirectory and pointed E-Sys to the right file in the right directory, but when I click on 'Coding' in E-Sys, I get the following error:

EstCmDocumentCorruptException: Error during base64 decoding of EST token!
__________________________________________________ ___
com.bmw.esys.commons.exception.EsysException: An error occurred while processing the EST file "C:\ESysData\E-Sys EST\xxxxxxxx-esys.est". See details for more information. [C157]

Any ideas?

Are your patch files for E-Sys 3.23.4 or another version of E-Sys as they are E-Sys version specific.

[SimonB]

Originally Posted by shawnsheridan

Are your patch files for E-Sys 3.23.4 or another version of E-Sys as they are E-Sys version specific.

The folder name is "E-Sys323-EST-Patch-noPW", so I'm assuming that they're for 3.23.x, whether x is 4 or some other subversion, I don't know

I've emailed the source, asking if he knows what could cause the error, so I guess I'll have to wait

Thanks...

[Koer]

Originally Posted by shawnsheridan

PM sent.

Thanks!!