04-08-2024, 06:28 PM | #1 |
Registered
0
Rep 1
Posts |
F32 Wheels
I drive a 2016 435i xdrive with m sport brakes.
I purchased a used set 624M Wheels and realize now the sizing is smaller than I thought at 19x7.5" - 19x8" ... Looks like these wheels are sized for a 2 series. Will these wheels be too small for my car? I was planning on running staggered 235/265 but now I will need to get 225/40, 255/35 tires. Or should I be looking to resell these wheels now as I will have issues? The ET is 46 and 52 on the wheels, so I am likely looking at getting some 10MM spacers to make up for this now is that reasonable? Appreciate the help. Last edited by zachary1g; 04-08-2024 at 06:36 PM.. |
04-08-2024, 09:18 PM | #2 | |
Brigadier General
3315
Rep 4,511
Posts |
Quote:
if you don't sell... min rim width for 255 is 8.5", so it is technically too wide and pinched on 8". if you don't mind that it's pinched and has some sidewall bulge, i have seen some members that have done it. i don't care for pinching a tire beyond spec, so i'd prolly run 225/40/19(26.1")+235/40/19(26.3") with a 1.2% diameter difference, OR 225/40/19 square for spacers 12.5-15 front, 12.5-18(if narrow tire) rear . Last edited by alohasurftoad; 04-08-2024 at 09:26 PM.. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|