Correctly installing front lip?

Haydon · 07-09-2021, 12:30 PM

Hey guys,

I recently got myself a 435i, now one problem I have realized, under hard acceleration the center piece of my splitter comes loose and hits the ground, scraping the crap out of it. It looks like it was only held in by 2 screws, so I need to buy a new one, because this one is cracked and a bit rough now, but is there anything else I could use instead/ or with the screws to make it more secure?

WillLowe · 07-09-2021, 05:00 PM

I used 6mm nut and bolt with a spring washer with a large washer either side and it's rock solid after screws kept working loose. It's not moved in nearly 2 years

07-09-2021, 12:30 PM	#1
Haydon Registered 0 Rep 1 Posts Drives: BMW 435I Join Date: Jun 2021 Location: England iTrader: (0)	Correctly installing front lip? Hey guys, I recently got myself a 435i, now one problem I have realized, under hard acceleration the center piece of my splitter comes loose and hits the ground, scraping the crap out of it. It looks like it was only held in by 2 screws, so I need to buy a new one, because this one is cracked and a bit rough now, but is there anything else I could use instead/ or with the screws to make it more secure?
	Appreciate 0 Tweet Quote

07-09-2021, 05:00 PM	#2
WillLowe Lieutenant 300 Rep 595 Posts Drives: F32 435d Join Date: Nov 2017 Location: Newcastle upon Tyne iTrader: (0)	I used 6mm nut and bolt with a spring washer with a large washer either side and it's rock solid after screws kept working loose. It's not moved in nearly 2 years
	Appreciate 1 Haydon0.00 Quote