F30POST
F30POST
2012-2015 BMW 3-Series and 4-Series Forum
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW 3-Series and 4-Series Forum (F30 / F32) | F30POST > Technical Forums > F30 DIYs and Coding Discussions > Coding error. CAFD not found
proTUNING Freaks
Post Reply
 
Thread Tools Search this Thread
      09-09-2020, 10:06 AM   #199
shawnsheridan
General
shawnsheridan's Avatar
United_States
4557
Rep
24,435
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by kd8 View Post
Hello Shawn and anybody else, who can help.

I'm trying to retrofit heated steering wheel, according to this post:
https://f30.bimmerpost.com/forums/sh....php?t=1231186

I think I did hardwiring ok, with coding I have problems. I am total beginner at coding.

First I added option 248 to Salapa elements and tried to VO code FEM_BODY, KOMBI and HU_ENTRYNAV.
It did not work, I got errors: file for"cafd.."not found.
When I read coding data, I get this error also on other modules, not just three I tried to VO code.
So I am assuming that this year, when car was at the dealer, they changed firmware. Before that I have successfully coded auto start-stop, but dealer reseted it.

So I downloaded latest psdzdata data I found 4.21.32, tried to read coding data FEM_BODY, same issue, same error CAFD_00000794_018_070_004 Fehler: File for "cafd_00000794_018_070_004" not found![C012]
Then I tried to "Detect CAF for SWE" for FEM_BODY, I get error: failed to get caf for swe...kiss error
According to Esys I-step of my car is F020-17-11-530

What should I do? Try with differrent version of psdzdata? With older version I had It did not work either.
And am I doing everything correcly or should I try different way? Is it necessary to VO code all three modules I mentioned or is it enough to code just FEM_BODY?
I have basic KOMBI so warning for "heated steering wheeel turned on" probably won't work anyway. For HU I don't know if it has anything to do with heated steering wheel option.
I would really appreciate more detailed answer, as I am new at coding.

My car is 2014 F31, I use Esys 3.27.1, Enet cable. I connect via VIN, F020 (not direct).

Thank you!
I replied to your same PM.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      09-10-2020, 01:11 AM   #200
kd8
New Member
Slovenia
0
Rep
8
Posts

Drives: F31 318d
Join Date: Jul 2020
Location: Slovenia, EU

iTrader: (0)

Yesterday I could not beleive when I saw message on my kombi: Steering wheel heating activated
It is in Slovenian language

Big thanks to ShawnSheridan
Attached Images
 
Appreciate 0
      09-10-2020, 08:00 AM   #201
shawnsheridan
General
shawnsheridan's Avatar
United_States
4557
Rep
24,435
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by kd8 View Post
Yesterday I could not beleive when I saw message on my kombi: Steering wheel heating activated
It is in Slovenian language

Big thanks to ShawnSheridan
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      09-13-2020, 09:26 AM   #202
darkblade17
Registered
0
Rep
2
Posts

Drives: 2015 BMW 320i
Join Date: Sep 2020
Location: Madrid

iTrader: (0)

Hello, I need some help here!

I recently got my firmware car updated at the dealer and lost all my updates.
I tried to do set the FDL again and I got an error
File for "cafd_ffffffff-255_255_255" not found!

Tried to reset Fem_body injecting new cafd, following this steps
Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on desired ECU => Click on "Detect CAF for SWE" => Select the replacement CAFD from above => Select OK => Right-Click on ECU (the ECU itself not the underlying CAFD) => Select CODE.

but after clicking CODE I get the same error
File for "cafd_ffffffff-255_255_255" not found!

I am using esys 3.30 and v.4.25.12_PSdZData_Full.
My I-Step is F020-20-07-530
I-Step (Current) F020-20-07-540

Could anyone help me please?
Appreciate 0
      09-13-2020, 09:31 AM   #203
shawnsheridan
General
shawnsheridan's Avatar
United_States
4557
Rep
24,435
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by darkblade17 View Post
Hello, I need some help here!

I recently got my firmware car updated at the dealer and lost all my updates.
I tried to do set the FDL again and I got an error
File for "cafd_ffffffff-255_255_255" not found!

Tried to reset Fem_body injecting new cafd, following this steps
Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on desired ECU => Click on "Detect CAF for SWE" => Select the replacement CAFD from above => Select OK => Right-Click on ECU (the ECU itself not the underlying CAFD) => Select CODE.

but after clicking CODE I get the same error
File for "cafd_ffffffff-255_255_255" not found!

I am using esys 3.30 and v.4.25.12_PSdZData_Full.
My I-Step is F020-20-07-530
I-Step (Current) F020-20-07-540

Could anyone help me please?
You do it wrong. If you did as written above, it would be looking for the CAFD you are injecting, not for "cafd_ffffffff-255_255_255".
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      09-13-2020, 09:50 AM   #204
darkblade17
Registered
0
Rep
2
Posts

Drives: 2015 BMW 320i
Join Date: Sep 2020
Location: Madrid

iTrader: (0)

Quote:
Originally Posted by shawnsheridan View Post
You do it wrong. If you did as written above, it would be looking for the CAFD you are injecting, not for "cafd_ffffffff-255_255_255".
My bad! I just noticed that I have to pick one version of the list when injecting!
Thanks!!
Appreciate 0
      09-13-2020, 09:56 AM   #205
shawnsheridan
General
shawnsheridan's Avatar
United_States
4557
Rep
24,435
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by darkblade17 View Post
My bad! I just noticed that I have to pick one version of the list when injecting!
Thanks!!
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
      09-16-2020, 12:38 AM   #206
mih222001
New Member
Romania
0
Rep
6
Posts

Drives: Bmw F30 328xi
Join Date: Jan 2020
Location: Romania

iTrader: (0)

Cafd not found

Hi all,

While trying to code REM and TRSVC after a reverse camera retrofit on a 2012 F30 328i, I get in E-Sys the error cafd not found on REM module. I am trying to achieve installation via coding 3AG option.
The HU_NBT module gets coded correctly, and when I put the car in reverse I can see the rear camera menu, but unfortunately no image.
iSTA says that the TRSVC module is not coded on the car.
I am using Esys 3.27.1.
On February this year the dealer updated the software on the car. The I-Level of the car is F-020-19-07-530. I cannot find in the cafd list of the TRSVC module a matching version cafd.
As I am complete newbie to coding, I hope that this makes sense. Can you let me know what can be done? Thanks a lot!

Last edited by mih222001; 09-16-2020 at 05:55 AM..
Appreciate 0
      09-16-2020, 10:26 AM   #207
shawnsheridan
General
shawnsheridan's Avatar
United_States
4557
Rep
24,435
Posts

Drives: 2016 650i GC M-Sport
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by mih222001 View Post
Hi all,

While trying to code REM and TRSVC after a reverse camera retrofit on a 2012 F30 328i, I get in E-Sys the error cafd not found on REM module. I am trying to achieve installation via coding 3AG option.
The HU_NBT module gets coded correctly, and when I put the car in reverse I can see the rear camera menu, but unfortunately no image.
iSTA says that the TRSVC module is not coded on the car.
I am using Esys 3.27.1.
On February this year the dealer updated the software on the car. The I-Level of the car is F-020-19-07-530. I cannot find in the cafd list of the TRSVC module a matching version cafd.
As I am complete newbie to coding, I hope that this makes sense. Can you let me know what can be done? Thanks a lot!
Update your PSZData. PM sent.
__________________

2016 650i GC M-Sport w/ 20" 373M Wheels; Alpine White; Individual Opal White Full Merino Leather; Gray Poplar Wood Trim
Anthracite Alcantara Headliner; Ceramic Controls; Executive Package w/ B&O Sound System; Integral Active Steering, etc.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:40 AM.




f30post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST