[GA/\/\/\/\A_CT]

Gents,

How many hours of labor should an HPFP install cost?

Is there a difference between using an oem supra pump Vs an aftermarket?

Thanks!

[1slowb58]

I did it myself in a school parking lot in 30 minutes. Dorch stage 2. If you have any wrenching chops I'd recommend doing it yourself, I could see a shop charging 1-2 hours easily.

[weehe126]

Very easy to do, shouldn't take more than an hour.

[GA/\/\/\/\A_CT]

Thanks

Do I need to update my BM3 stage 1 map if I install HPFP?

[imperfectluck]

Originally Posted by GA/\/\/\/\A_CT

Thanks

Do I need to update my BM3 stage 1 map if I install HPFP?

Yes, you will need to hit the config on the map file itself and select the correct HPFP from the drop down list.

[blacksapphire440i]

Originally Posted by GA/\/\/\/\A_CT

Gents,

How many hours of labor should an HPFP install cost?

Is there a difference between using an oem supra pump Vs an aftermarket?

Thanks!

I know the owner of an auto shop. Whenever I told him I had the TU HPFP he literally installed it in 5-10 minutes. Not even joking. I was so damn surprised his hands moved like that. It's not a hard job at all if you have the tools. $50-$100 is reasonable for installation. Anything more you're being upsold

[Mr. 340]

Originally Posted by GA/\/\/\/\A_CT

Thanks

Do I need to update my BM3 stage 1 map if I install HPFP?

I believe that for the TU Pump no need for updating your tune, for any others like Dorch or Spool then yes.

[ATL_Nak-Muay]

There's more to remove and replace than replacing the pump itself. Once you clear the way, it's 4 nuts and a 17mm wrench, then the two torx to pull the pump. I watched kern's video, then swapped it out in the garage.

[GA/\/\/\/\A_CT]

Great info, thanks guys.

You gotta love this forum!

[leew102]

Originally Posted by GA/\/\/\/\A_CT

Great info, thanks guys.

You gotta love this forum!

Would also recommend getting a inch/lb torque wrench, like a bike repair one. The torx bolts for the pump need 11lb/ft I think and are really easy to snap if you don't have a torque wrench that is much lower. I snapped one of mine but got lucky there was enough sticking out for me to use a clamp to get out.

[Sleeper340i]

A shop that did my Supra HPFP said it was pretty easy so I'm assuming quick. I'm a novice when it comes to installing things so when i installed my Dorch Stage 2 it look about 4 hours, only because I got stuck forever fitting the damn HPFP and LPFP in. If I didn't get stuck probably woulda saved about 2 hours.

I received quotes though from 2 shops for HPFP install and it was about 300 each (3ish hours)