03-04-2019, 10:05 AM | #1 |
Private First Class
40
Rep 164
Posts |
LF: A shop to paint or powder coat brake calipers in GVA?
Can anyone recommend a shop in Vancouver (lower mainland) that will paint brake calipers properly by taking them off. Looking to do them in Daytona Yellow and perhaps stamping brembo on them. Also what is the best finish for looks and durability, painting them or powder coating them ? Looking for a gloss finish/coat.
Lastly, how much mula would something like this be? thanks,
__________________
dakoo12
2013 335i Xdrive (F30) 2015 X3 Xdrive lci (F25) 2007 323i (e90) RIP |
03-05-2019, 02:35 PM | #2 |
Second Lieutenant
48
Rep 225
Posts |
Not sure if prices will vary a lot for you but i was quoted around 300-400 for doing all 4 corners.
This pricing is for GTA area. Ended up painting them with high heat paint for $50 including brembo stickers. |
Appreciate
0
|
03-15-2019, 11:49 AM | #4 |
Major
514
Rep 1,055
Posts
Drives: 2016 340i M Sport 6MT+RWD
Join Date: Sep 2014
Location: Toronto, Ontario
|
Really depends on the shop you go to so ask around. I highly recommend powder coating vs. a spray can as powder coating will last you the life of the car and way more resistant to chips/scratches.
I'm also in the GTA and I did a set of Nissan R32 brakes about 7 years ago for $250 with vinyl lettering - I rebuilt them myself with new OEM seals for about $25. These were also 4 pot front & 2 pot rear - came out great! Shitty old iPhone pic:
__________________
2016 Estoril Blue II 340i M Sport | ///MPPSK | 6MT | RWD | Fully Loaded
BM3 Stage 2+ 93 | B58TU HPFP | VRSF v2 Catted Downpipe | 550i Clutch Last edited by DrifterX; 03-15-2019 at 11:58 AM.. Reason: Added pic |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|