[GraveChair]

So I have an f36 and I want to do an m sport conversion for my front bumper, and I saw an oem front bumper for sale. my question is if I buy just an oem bumper will I be able to do the conversion or are there other supporting parts that id need to make it work? I know if you do an aftermarket conversion there is but I didnt know if its the same way with an oem fitting bumper.

[Oksamit78]

This is the front bumper cover on your car and all relevant parts:
https://www.realoem.com/bmw/enUS/sho...diagId=51_9252

This is what is required for M Sport front bumper cover:
https://www.realoem.com/bmw/enUS/sho...diagId=51_9255

Compare these two part lists and identify what other than cover itself requires changes.

Additionally review these for differences:
Trim decor:
https://www.realoem.com/bmw/enUS/sho...diagId=51_9254

Air ducts:
https://www.realoem.com/bmw/enUS/sho...diagId=51_9256

Good luck

[GraveChair]

Originally Posted by Oksamit78

This is the front bumper cover on your car and all relevant parts:
https://www.realoem.com/bmw/enUS/sho...diagId=51_9252

This is what is required for M Sport front bumper cover:
https://www.realoem.com/bmw/enUS/sho...diagId=51_9255

Compare these two part lists and identify what other than cover itself requires changes.

Additionally review these for differences:
Trim decor:
https://www.realoem.com/bmw/enUS/sho...diagId=51_9254

Air ducts:
https://www.realoem.com/bmw/enUS/sho...diagId=51_9256

Good luck

thank you!

[YASBBYM3]

Originally Posted by Oksamit78

This is the front bumper cover on your car and all relevant parts:
https://www.realoem.com/bmw/enUS/sho...diagId=51_9252

This is what is required for M Sport front bumper cover:
https://www.realoem.com/bmw/enUS/sho...diagId=51_9255

Compare these two part lists and identify what other than cover itself requires changes.

Additionally review these for differences:
Trim decor:
https://www.realoem.com/bmw/enUS/sho...diagId=51_9254

Air ducts:
https://www.realoem.com/bmw/enUS/sho...diagId=51_9256

Good luck

There’s more than that single page

[Crystal330i]

Originally Posted by GraveChair

So I have an f36 and I want to do an m sport conversion for my front bumper, and I saw an oem front bumper for sale. my question is if I buy just an oem bumper will I be able to do the conversion or are there other supporting parts that id need to make it work? I know if you do an aftermarket conversion there is but I didnt know if its the same way with an oem fitting bumper.

If you have PDC sensors, the bracket that holds them will either be plastic welded on or 3M taped on. You can reuse them if taped, but if they are welded on you need new PDC mounting brackets as well. (PDC sensors in different location on M-sport bumpers)