[shakmonster]

I recently got the Bimmercode app with a pair of aftermarket angel eye headlights and wanted the car to have the headlights on when the unlock button is pressed. I started out looking for YouTube videos I tried them and nothing worked I ended up coding my headlights to stay on in the 0 (off) position and this is very VERY annoying. I tried going back in my steps and coded back and forth for at least a 100 times (no exaggeration). Now I'm just looking if anyone has steps to remove that process so headlights aren't on in the off position and also how to keep the angel eyes on when the cars unlock button is pressed any help will be appreciated!

[psyki]

Were the lights plug and play using the same harness? Did your car have angel eyes beforehand? Your coding efforts might not have the desired effect if the wiring is not what the car expects it to be.

[shakmonster]

my car originally came with halogen headlights and yes it was plug and play.

[chowser51]

Haven’t looked at how the halogens are setup but did yours come with angel eyes originally? Are the aftermarket ones running the angel eyes off a different source?